Product Description
Detailed Photos
Product Parameters
Products Description
R Series Helical Speed Reducers
R series helical gear reducer has high technological content; it adopts hardened gear surface design, which is reliable and durable and has high overload capacity.
It has the following characteristics
1,R series helical gear reducer is manufactured in accordance with international technical requirements, meeting the technical
requirements of most countries in the world.
2,The design of R series helical gear reducer plays a space-saving, high overload capacity.
3, R series helical gear reducer has low energy consumption, superior performance and high efficiency of more than 95%;
4,R series helical gear reducer has low vibration, low noise, and high energy saving;
5,R series helical gear reducer is made of high quality forged steel material, steel cast iron case, and the surface of gear is heat-treated by high frequency; reliable and durableTranslated with DeepL
R Series reducers are designed and manufactured on the basis of modular combination system.
There are a lot of motor combinations, installation forms and structural schemes. The transmission
ratio is classified and fine to meet different operating conditions, and the performance is superior.
Reinforced high rigid cast iron box; The hardened gear is made of high-quality alloy steel. Its surface
is carburized, quenched and hardened, and the gear is finely ground. It has stable transmission, low
noise, and large bearing capacity. Low temperature rise, long service life. It is widely used in metallurgy,1. Features: small offset output, compact structure, maximum use of box space, use of integral casting box, good stiffness, can improve the strength of the shaft and bearing life.
2. Installation type and output mode: bottom seated type and large and small flange type installation, CHINAMFG shaft output.
3. Input mode: direct motor, shaft input and connecting flange input.
4. Reduction ratio: secondary 5~24.8, tertiary 27.2~264, R/R combination up to 18125.
5. Average efficiency: Class II 96%, Class III 94%, R/R combination 85%.
6. The R series specially designed for mixing can bear large axial and radial forces.
Technical parameters:
Coaxial coaxial output
R reducer
Power: 0.12KW~160KW
Torque: 1.4N · m ~ 23200N · m
Output speed: 0.06 ~ 1090r/min
Model example:
R17-Y4-4P-32.40-M1-0°
R: Series code
F: Shaft extension flange installation
17: Machine model
Y: Three phase AC asynchronous motor
4: Motor power
4P: motor stage
32.40: Transmission ratio
M1: Installation type
0 °: junction box position (0 ° – 270 °)
R series helical gear hardened gear reducer
Basic model of R series reducer:
R17R27R37R47R57R67R77R87R97R107R137R147R167
RF17RF27RF37RF47RF57RF67RF77RF87RF97RF107RF137RF147RF167
RX37RX57RX67RX77RX87RX97RX107RX127RX157
RXF37RXF57RXF67RXF77RXF87RXF97RXF107RXF127RXF157
R series helical gear reducer with hard tooth surface features small size, light weight, high bearing capacity, high efficiency, long service life, convenient installation, wide motor power range, fine transmission ratio classification, etc. It can be widely used in equipment that needs to be decelerated in various industries.
sewage treatment, chemical industry, pharmacy and other industries.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Hardness: | Hardened Tooth Surface |
|---|---|
| Installation: | Horizontal Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Single-Step |
| Type: | Gear Reducer |
| Samples: |
US$ 1780/Piece
1 Piece(Min.Order) | |
|---|
What factors should be considered when selecting an AC motor for a particular application?
When selecting an AC motor for a particular application, several factors need to be considered to ensure the motor meets the requirements and performs optimally. Here are the key factors to consider:
- Power Requirements: Determine the power requirements of the application, including the required torque and speed. The motor should have adequate power output to meet the demands of the specific task. Consider factors such as starting torque, running torque, and speed range to ensure the motor can handle the load effectively.
- Motor Type: There are different types of AC motors, including induction motors, synchronous motors, and brushless DC motors. Each type has its own characteristics and advantages. Consider the application’s requirements and factors such as speed control, efficiency, and starting torque to determine the most suitable motor type.
- Environmental Conditions: Assess the environmental conditions in which the motor will operate. Factors such as temperature, humidity, dust, and vibration levels can impact motor performance and longevity. Choose a motor that is designed to withstand the specific environmental conditions of the application.
- Size and Space Constraints: Consider the available space for motor installation. Ensure that the physical dimensions of the motor, including its length, diameter, and mounting arrangement, are compatible with the available space. Additionally, consider the weight of the motor if it needs to be mounted or transported.
- Efficiency: Energy efficiency is an important consideration, as it can impact operational costs and environmental sustainability. Look for motors with high efficiency ratings, which indicate that they convert electrical energy into mechanical energy with minimal energy loss. Energy-efficient motors can lead to cost savings and reduced environmental impact over the motor’s lifespan.
- Control and Speed Requirements: Determine if the application requires precise speed control or if a fixed speed motor is sufficient. If variable speed control is needed, consider motors that can be easily controlled using variable frequency drives (VFDs) or other speed control mechanisms. For applications that require high-speed operation, select a motor that can achieve the desired speed range.
- Maintenance and Serviceability: Assess the maintenance requirements and serviceability of the motor. Consider factors such as the accessibility of motor components, ease of maintenance, availability of spare parts, and the manufacturer’s reputation for reliability and customer support. A motor that is easy to maintain and service can help minimize downtime and repair costs.
- Budget: Consider the budget constraints for the motor selection. Balance the desired features and performance with the available budget. In some cases, investing in a higher quality, more efficient motor upfront can lead to long-term cost savings due to reduced energy consumption and maintenance requirements.
By carefully considering these factors, it is possible to select an AC motor that aligns with the specific requirements of the application, ensuring optimal performance, efficiency, and reliability.
Are there energy-saving technologies or features available in modern AC motors?
Yes, modern AC motors often incorporate various energy-saving technologies and features designed to improve their efficiency and reduce power consumption. These advancements aim to minimize energy losses and optimize motor performance. Here are some energy-saving technologies and features commonly found in modern AC motors:
- High-Efficiency Designs: Modern AC motors are often designed with higher efficiency standards compared to older models. These motors are built using advanced materials and optimized designs to reduce energy losses, such as resistive losses in motor windings and mechanical losses due to friction and drag. High-efficiency motors can achieve energy savings by converting a higher percentage of electrical input power into useful mechanical work.
- Premium Efficiency Standards: International standards and regulations, such as the NEMA Premium® and IE (International Efficiency) classifications, define minimum energy efficiency requirements for AC motors. Premium efficiency motors meet or exceed these standards, offering improved efficiency compared to standard motors. These motors often incorporate design enhancements, such as improved core materials, reduced winding resistance, and optimized ventilation systems, to achieve higher efficiency levels.
- Variable Frequency Drives (VFDs): VFDs, also known as adjustable speed drives or inverters, are control devices that allow AC motors to operate at variable speeds by adjusting the frequency and voltage of the electrical power supplied to the motor. By matching the motor speed to the load requirements, VFDs can significantly reduce energy consumption. VFDs are particularly effective in applications where the motor operates at a partial load for extended periods, such as HVAC systems, pumps, and fans.
- Efficient Motor Control Algorithms: Modern motor control algorithms, implemented in motor drives or control systems, optimize motor operation for improved energy efficiency. These algorithms dynamically adjust motor parameters, such as voltage, frequency, and current, based on load conditions, thereby minimizing energy wastage. Advanced control techniques, such as sensorless vector control or field-oriented control, enhance motor performance and efficiency by precisely regulating the motor’s magnetic field.
- Improved Cooling and Ventilation: Effective cooling and ventilation are crucial for maintaining motor efficiency. Modern AC motors often feature enhanced cooling systems, including improved fan designs, better airflow management, and optimized ventilation paths. Efficient cooling helps prevent motor overheating and reduces losses due to heat dissipation. Some motors also incorporate thermal monitoring and protection mechanisms to avoid excessive temperatures and ensure optimal operating conditions.
- Bearings and Friction Reduction: Friction losses in bearings and mechanical components can consume significant amounts of energy in AC motors. Modern motors employ advanced bearing technologies, such as sealed or lubrication-free bearings, to reduce friction and minimize energy losses. Additionally, optimized rotor and stator designs, along with improved manufacturing techniques, help reduce mechanical losses and enhance motor efficiency.
- Power Factor Correction: Power factor is a measure of how effectively electrical power is being utilized. AC motors with poor power factor can contribute to increased reactive power consumption and lower overall power system efficiency. Power factor correction techniques, such as capacitor banks or power factor correction controllers, are often employed to improve power factor and minimize reactive power losses, resulting in more efficient motor operation.
By incorporating these energy-saving technologies and features, modern AC motors can achieve significant improvements in energy efficiency, leading to reduced power consumption and lower operating costs. When considering the use of AC motors, it is advisable to select models that meet or exceed recognized efficiency standards and consult manufacturers or experts to ensure the motor’s compatibility with specific applications and energy-saving requirements.
Can you explain the basic working principle of an AC motor?
An AC motor operates based on the principles of electromagnetic induction. It converts electrical energy into mechanical energy through the interaction of magnetic fields. The basic working principle of an AC motor involves the following steps:
- The AC motor consists of two main components: the stator and the rotor. The stator is the stationary part of the motor and contains the stator windings. The rotor is the rotating part of the motor and is connected to a shaft.
- When an alternating current (AC) is supplied to the stator windings, it creates a changing magnetic field.
- The changing magnetic field induces a voltage in the rotor windings, which are either short-circuited conductive bars or coils.
- The induced voltage in the rotor windings creates a magnetic field in the rotor.
- The magnetic field of the rotor interacts with the rotating magnetic field of the stator, resulting in a torque force.
- The torque force causes the rotor to rotate, transferring mechanical energy to the connected shaft.
- The rotation of the rotor continues as long as the AC power supply is provided to the stator windings.
This basic working principle is applicable to various types of AC motors, including induction motors and synchronous motors. However, the specific construction and design of the motor may vary depending on the type and intended application.
editor by CX 2024-04-12
China factory High precise Planetary gearbox DRN Series Torque Planetary Gearbox Harmonic Drive Helical Gear Motor Reducer worm gear winch
Warranty: 1 years
Applicable Industries: Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Retail, Food Shop, Printing Shops, Energy & Mining, Food & Beverage Shops, High performance yeduc planetary gearbox harmonic drive speed reducer Other
Weight (KG): 3 KG
Customized support: OEM, ODM
Gearing Arrangement: Harmonic
Output Torque: 2.6-1760N.m
Input Speed: 750~3500rpm
Output Speed: 14-280rpm
Product name: Planetary reduction gearbox
Installation method: Any
Average life: 2000h
Protection level: 65IP
Maximum output radial force: Fr=300N
Maximum output axial force: Fa=100N
Backlash: ≥10arcmin
Rated output torque: TN
Fault stop torque: 2TN
Full load efficiency: 90%~94%
Packaging Details: plastic packaging bag & standard packing
PRODUCT DESCRIPTION
| Product name | DRN Series Torque Planetary Gearbox Harmonic Drive Helical Gear Motor Reducer | ||||||
| Reduction ratio | Single-stage:4/5/7/10 Bipolar:15/20/25/30/35/40/50/70 | ||||||
| Rated output torque/ Nm | TN | ||||||
| Fault stop torque/ Nm | 2TN | ||||||
| Rated input speed/ min | 3000MIN-1 | ||||||
| Input speed/ min | 3000MIN-1 | ||||||
| Installation method | Any | ||||||
| Installation method/ H | 2000h | ||||||
| Maximum output radial force/ N | Fr=300N | ||||||
| Maximum output axial force/ N | Fa=100N | ||||||
| Full load efficiency/ % | 90%–94% | ||||||
| Lubrication method | Long term effectiveness | ||||||
| Protection level/ IP | 65 | ||||||
| Backlash/ armin | ≥10 | ||||||
| Operating temperature/ ℃ | -10℃~80℃ | ||||||
Types of Bevel Gears
Bevel Gears are used in a number of industries. They are used in wheeled excavators, dredges, conveyor belts, mill actuators, and rail transmissions. A bevel gear’s spiral or angled bevel can make it suitable for confined spaces. It is also used in robotics and vertical supports of rolling mills. You can use bevel gears in food processing processes. For more information on bevel gears, read on.
Spiral bevel gear
Spiral bevel gears are used to transmit power between two shafts in a 90-degree orientation. They have curved or oblique teeth and can be fabricated from various metals. Bestagear is one manufacturer specializing in medium to large spiral bevel gears. They are used in the mining, metallurgical, marine, and oil fields. Spiral bevel gears are usually made from steel, aluminum, or phenolic materials.
Spiral bevel gears have many advantages. Their mesh teeth create a less abrupt force transfer. They are incredibly durable and are designed to last a long time. They are also less expensive than other right-angle gears. They also tend to last longer, because they are manufactured in pairs. The spiral bevel gear also reduces noise and vibration from its counterparts. Therefore, if you are in need of a new gear set, spiral bevel gears are the right choice.
The contact between spiral bevel gear teeth occurs along the surface of the gear tooth. The contact follows the Hertz theory of elastic contact. This principle holds for small significant dimensions of the contact area and small relative radii of curvature of the surfaces. In this case, strains and friction are negligible. A spiral bevel gear is a common example of an inverted helical gear. This gear is commonly used in mining equipment.
Spiral bevel gears also have a backlash-absorbing feature. This feature helps secure the thickness of the oil film on the gear surface. The shaft axis, mounting distance, and angle errors all affect the tooth contact on a spiral bevel gear. Adjusting backlash helps to correct these problems. The tolerances shown above are common for bevel gears. In some cases, manufacturers make slight design changes late in the production process, which minimizes the risk to OEMs.
Straight bevel gear
Straight bevel gears are among the easiest types of gears to manufacture. The earliest method used to manufacture straight bevel gears was to use a planer equipped with an indexing head. However, improvements have been made in manufacturing methods after the introduction of the Revacycle system and the Coniflex. The latest technology allows for even more precise manufacturing. Both of these manufacturing methods are used by CZPT. Here are some examples of straight bevel gear manufacturing.
A straight bevel gear is manufactured using two kinds of bevel surfaces, namely, the Gleason method and the Klingelnberg method. Among the two, the Gleason method is the most common. Unlike other types of gear, the CZPT method is not a universal standard. The Gleason system has higher quality gears, since its adoption of tooth crowning is the most effective way to make gears that tolerate even small assembly errors. It also eliminates the stress concentration in the bevelled edges of the teeth.
The gear’s composition depends on the application. When durability is required, a gear is made of cast iron. The pinion is usually three times harder than the gear, which helps balance wear. Other materials, such as carbon steel, are cheaper, but are less resistant to corrosion. Inertia is another critical factor to consider, since heavier gears are more difficult to reverse and stop. Precision requirements may include the gear pitch and diameter, as well as the pressure angle.
Involute geometry of a straight bevel gear is often computed by varying the surface’s normal to the surface. Involute geometry is computed by incorporating the surface coordinates and the theoretical tooth thickness. Using the CMM, the spherical involute surface can be used to determine tooth contact patterns. This method is useful when a roll tester tooling is unavailable, because it can predict the teeth’ contact pattern.
Hypoid bevel gear
Hypoid bevel gears are an efficient and versatile speed reduction solution. Their compact size, high efficiency, low noise and heat generation, and long life make them a popular choice in the power transmission and motion control industries. The following are some of the benefits of hypoid gearing and why you should use it. Listed below are some of the key misperceptions and false assumptions of this gear type. These assumptions may seem counterintuitive at first, but will help you understand what this gear is all about.
The basic concept of hypoid gears is that they use two non-intersecting shafts. The smaller gear shaft is offset from the larger gear shaft, allowing them to mesh without interference and support each other securely. The resulting torque transfer is improved when compared to conventional gear sets. A hypoid bevel gear is used to drive the rear axle of an automobile. It increases the flexibility of machine design and allows the axes to be freely adjusted.
In the first case, the mesh of the two bodies is obtained by fitting the hyperboloidal cutter to the desired gear. Its geometric properties, orientation, and position determine the desired gear. The latter is used if the desired gear is noise-free or is required to reduce vibrations. A hyperboloidal cutter, on the other hand, meshes with two toothed bodies. It is the most efficient option for modeling hypoid gears with noise concerns.
The main difference between hypoid and spiral bevel gears is that the hypoid bevel gear has a larger diameter than its counterparts. They are usually found in 1:1 and 2:1 applications, but some manufacturers also provide higher ratios. A hypoid gearbox can achieve speeds of three thousand rpm. This makes it the preferred choice in a variety of applications. So, if you’re looking for a gearbox with a high efficiency, this is the gear for you.
Addendum and dedendum angles
The addendum and dedendum angles of a bevel gear are used to describe the shape and depth of the teeth of the gear. Each tooth of the gear has a slightly tapered surface that changes in depth. These angles are defined by their addendum and dedendum distances. Addendum angle is the distance between the top land and the bottom surface of the teeth, while dedendum angle is the distance between the pitch surface and the bottom surface of the teeth.
The pitch angle is the angle formed by the apex point of the gear’s pitch cone with the pitch line of the gear shaft. The dedendum angle, on the other hand, is the depth of the tooth space below the pitch line. Both angles are used to measure the shape of a bevel gear. The addendum and dedendum angles are important for gear design.
The dedendum and addendum angles of a bevel gear are determined by the base contact ratio (Mc) of the two gears. The involute curve is not allowed to extend within the base diameter of the bevel gear. The base diameter is also a critical measurement for the design of a gear. It is possible to reduce the involute curve to match the involute curve, but it must be tangential to the involute curve.
The most common application of a bevel gear is the automotive differential. They are used in many types of vehicles, including cars, trucks, and even construction equipment. They are also used in the marine industry and aviation. Aside from these two common uses, there are many other uses for bevel gears. And they are still growing in popularity. But they’re a valuable part of automotive and industrial gearing systems.
Applications of bevel gears
Bevel gears are used in a variety of applications. They are made of various materials depending on their weight, load, and application. For high-load applications, ferrous metals such as grey cast iron are used. These materials have excellent wear resistance and are inexpensive. For lower-weight applications, steel or non-metals such as plastics are used. Some bevel gear materials are considered noiseless. Here are some of their most common uses.
Straight bevel gears are the easiest to manufacture. The earliest method of manufacturing them was with a planer with an indexing head. Modern manufacturing methods introduced the Revacycle and Coniflex systems. For industrial gear manufacturing, the CZPT uses the Revacycle system. However, there are many types of bevel gears. This guide will help you choose the right material for your next project. These materials can withstand high rotational speeds and are very strong.
Bevel gears are most common in automotive and industrial machinery. They connect the driveshaft to the wheels. Some even have a 45-degree bevel. These gears can be placed on a bevel surface and be tested for their transmission capabilities. They are also used in testing applications to ensure proper motion transmission. They can reduce the speed of straight shafts. Bevel gears can be used in many industries, from marine to aviation.
The simplest type of bevel gear is the miter gear, which has a 1:1 ratio. It is used to change the axis of rotation. The shafts of angular miter bevel gears can intersect at any angle, from 45 degrees to 120 degrees. The teeth on the bevel gear can be straight, spiral, or Zerol. And as with the rack and pinion gears, there are different types of bevel gears.
China best High Performance Planetary Gear Reducer AB Series High Output Torque Low Noise Planetary Helical Gearbox gear box
Warranty: 1 year
Applicable Industries: Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Other, Advertising Company
Weight (KG): 10 KG
Customized support: OEM, ODM, OBM
Gearing Arrangement: Planetary
Output Torque: 20-1500N.M
Input Speed: 0~4000RPM
Output Speed: 0~1300RPM
Product name: AB60 Planetary gearbox
Color: Customized
Certificate: ISO9001:2008
Gears Style: Helica Gear
Usage: Speed Change
Efficiency: 90%-96%
Application: Medical
Brand: beiji or custom
experience: more than 30 years
Keyword: planetary reducer motor
Packaging Details: Cartons or wooden cases
Port: HangZhou YanTian GuangZhou
Product Paramenters AB Series Precision Planetary Reducer
| Product Name | Precision Planetary Reducer | ||||||
| Efficiency | 92%-96% | ||||||
| Application | Power Tranmission | ||||||
| Brand | beiji or custom | ||||||
| Model No. | AB42-AB220 | ||||||
| Bearing: | NSK | ||||||
| Place of Origin: | ZheJiang China | ||||||
Spiral Gears for Right-Angle Right-Hand Drives
Spiral gears are used in mechanical systems to transmit torque. The bevel gear is a particular type of spiral gear. It is made up of two gears that mesh with one another. Both gears are connected by a bearing. The two gears must be in mesh alignment so that the negative thrust will push them together. If axial play occurs in the bearing, the mesh will have no backlash. Moreover, the design of the spiral gear is based on geometrical tooth forms.
Equations for spiral gear
The theory of divergence requires that the pitch cone radii of the pinion and gear be skewed in different directions. This is done by increasing the slope of the convex surface of the gear’s tooth and decreasing the slope of the concave surface of the pinion’s tooth. The pinion is a ring-shaped wheel with a central bore and a plurality of transverse axes that are offset from the axis of the spiral teeth.
Spiral bevel gears have a helical tooth flank. The spiral is consistent with the cutter curve. The spiral angle b is equal to the pitch cone’s genatrix element. The mean spiral angle bm is the angle between the genatrix element and the tooth flank. The equations in Table 2 are specific for the Spread Blade and Single Side gears from Gleason.
The tooth flank equation of a logarithmic spiral bevel gear is derived using the formation mechanism of the tooth flanks. The tangential contact force and the normal pressure angle of the logarithmic spiral bevel gear were found to be about twenty degrees and 35 degrees respectively. These two types of motion equations were used to solve the problems that arise in determining the transmission stationary. While the theory of logarithmic spiral bevel gear meshing is still in its infancy, it does provide a good starting point for understanding how it works.
This geometry has many different solutions. However, the main two are defined by the root angle of the gear and pinion and the diameter of the spiral gear. The latter is a difficult one to constrain. A 3D sketch of a bevel gear tooth is used as a reference. The radii of the tooth space profile are defined by end point constraints placed on the bottom corners of the tooth space. Then, the radii of the gear tooth are determined by the angle.
The cone distance Am of a spiral gear is also known as the tooth geometry. The cone distance should correlate with the various sections of the cutter path. The cone distance range Am must be able to correlate with the pressure angle of the flanks. The base radii of a bevel gear need not be defined, but this geometry should be considered if the bevel gear does not have a hypoid offset. When developing the tooth geometry of a spiral bevel gear, the first step is to convert the terminology to pinion instead of gear.
The normal system is more convenient for manufacturing helical gears. In addition, the helical gears must be the same helix angle. The opposite hand helical gears must mesh with each other. Likewise, the profile-shifted screw gears need more complex meshing. This gear pair can be manufactured in a similar way to a spur gear. Further, the calculations for the meshing of helical gears are presented in Table 7-1.
Design of spiral bevel gears
A proposed design of spiral bevel gears utilizes a function-to-form mapping method to determine the tooth surface geometry. This solid model is then tested with a surface deviation method to determine whether it is accurate. Compared to other right-angle gear types, spiral bevel gears are more efficient and compact. CZPT Gear Company gears comply with AGMA standards. A higher quality spiral bevel gear set achieves 99% efficiency.
A geometric meshing pair based on geometric elements is proposed and analyzed for spiral bevel gears. This approach can provide high contact strength and is insensitive to shaft angle misalignment. Geometric elements of spiral bevel gears are modeled and discussed. Contact patterns are investigated, as well as the effect of misalignment on the load capacity. In addition, a prototype of the design is fabricated and rolling tests are conducted to verify its accuracy.
The three basic elements of a spiral bevel gear are the pinion-gear pair, the input and output shafts, and the auxiliary flank. The input and output shafts are in torsion, the pinion-gear pair is in torsional rigidity, and the system elasticity is small. These factors make spiral bevel gears ideal for meshing impact. To improve meshing impact, a mathematical model is developed using the tool parameters and initial machine settings.
In recent years, several advances in manufacturing technology have been made to produce high-performance spiral bevel gears. Researchers such as Ding et al. optimized the machine settings and cutter blade profiles to eliminate tooth edge contact, and the result was an accurate and large spiral bevel gear. In fact, this process is still used today for the manufacturing of spiral bevel gears. If you are interested in this technology, you should read on!
The design of spiral bevel gears is complex and intricate, requiring the skills of expert machinists. Spiral bevel gears are the state of the art for transferring power from one system to another. Although spiral bevel gears were once difficult to manufacture, they are now common and widely used in many applications. In fact, spiral bevel gears are the gold standard for right-angle power transfer.While conventional bevel gear machinery can be used to manufacture spiral bevel gears, it is very complex to produce double bevel gears. The double spiral bevel gearset is not machinable with traditional bevel gear machinery. Consequently, novel manufacturing methods have been developed. An additive manufacturing method was used to create a prototype for a double spiral bevel gearset, and the manufacture of a multi-axis CNC machine center will follow.
Spiral bevel gears are critical components of helicopters and aerospace power plants. Their durability, endurance, and meshing performance are crucial for safety. Many researchers have turned to spiral bevel gears to address these issues. One challenge is to reduce noise, improve the transmission efficiency, and increase their endurance. For this reason, spiral bevel gears can be smaller in diameter than straight bevel gears. If you are interested in spiral bevel gears, check out this article.
Limitations to geometrically obtained tooth forms
The geometrically obtained tooth forms of a spiral gear can be calculated from a nonlinear programming problem. The tooth approach Z is the linear displacement error along the contact normal. It can be calculated using the formula given in Eq. (23) with a few additional parameters. However, the result is not accurate for small loads because the signal-to-noise ratio of the strain signal is small.
Geometrically obtained tooth forms can lead to line and point contact tooth forms. However, they have their limits when the tooth bodies invade the geometrically obtained tooth form. This is called interference of tooth profiles. While this limit can be overcome by several other methods, the geometrically obtained tooth forms are limited by the mesh and strength of the teeth. They can only be used when the meshing of the gear is adequate and the relative motion is sufficient.
During the tooth profile measurement, the relative position between the gear and the LTS will constantly change. The sensor mounting surface should be parallel to the rotational axis. The actual orientation of the sensor may differ from this ideal. This may be due to geometrical tolerances of the gear shaft support and the platform. However, this effect is minimal and is not a serious problem. So, it is possible to obtain the geometrically obtained tooth forms of spiral gear without undergoing expensive experimental procedures.
The measurement process of geometrically obtained tooth forms of a spiral gear is based on an ideal involute profile generated from the optical measurements of one end of the gear. This profile is assumed to be almost perfect based on the general orientation of the LTS and the rotation axis. There are small deviations in the pitch and yaw angles. Lower and upper bounds are determined as – 10 and -10 degrees respectively.
The tooth forms of a spiral gear are derived from replacement spur toothing. However, the tooth shape of a spiral gear is still subject to various limitations. In addition to the tooth shape, the pitch diameter also affects the angular backlash. The values of these two parameters vary for each gear in a mesh. They are related by the transmission ratio. Once this is understood, it is possible to create a gear with a corresponding tooth shape.
As the length and transverse base pitch of a spiral gear are the same, the helix angle of each profile is equal. This is crucial for engagement. An imperfect base pitch results in an uneven load sharing between the gear teeth, which leads to higher than nominal loads in some teeth. This leads to amplitude modulated vibrations and noise. In addition, the boundary point of the root fillet and involute could be reduced or eliminate contact before the tip diameter.
in London United Kingdom sales price shop near me near me shop factory supplier Atg Pgh Series Square Flange Helical Gear Planetary Reducer for Motor manufacturer best Cost Custom Cheap wholesaler
Ever-Energy Group CO., LTD. IS Expert IN Creating ALL Sorts OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL Equipment Speed REDUCERS, PARALLEL SHAFT HELICAL Gear REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM Equipment REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, Automobile GEARBOXES, PTO Travel SHAFTS, Specific REDUCER & Connected Equipment Components AND OTHER Relevant Goods, SPROCKETS, HYDRAULIC System, VACCUM PUMPS, FLUID COUPLING, Gear RACKS, CHAINS, TIMING PULLEYS, UDL Velocity VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, Gear PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS Minimal BACKLASH WORM REDUCERS AND SO ON. There is a specialized heart of province amount, EPG academician doing work station, experiment station for EPG post medical doctors, and countrywide 863 plan set up in EPG group. With these platforms and strong technical capability, the far more than 400 experts have created all assortment of unique higher specific and high power products, executed mould applications for crucial elements in the vehicle and nationwide business revitalizing program, ensuing a lot more than 5000 designed more than, between which 33 things are autonomous patent technology with four patent approved . ensures the stability and consistency of the key perform of components. PGH SERERS
Goods Characteristics:
(1) Low Sounds:UnEPTT65db.
(2) Reduced Backlash:Backlash is unEPTT3 arcmin . Backlash for two-phase speed reduction is with in 5 arcmin.
(3) EPT Effectiveness:one-phase up to 95% or more,2-phase up to 92% or more.
(4) EPT Enter Velocity:Input velocity enables for up to 8000RPM.
(five) EPT Torque:EPT torque output than that of typical planetary EPT EPTTs
(six) Upkeep-Cost-free:Lower grease use,can be life time lubrication
(seven) EPT Speed Reduction Ratio:Pace ratio is in excess of 1/one thousand.
Benefit:
Use:
- Aerospace,army sector.
- Health-related overall health,electronic data industry.
- Market robots,Creation EPTT,CNC EPTT instrument producing sector.
- EPT,EPT,EPT,Foodstuff,EPTlurgical.
- EPTal security engineering,Warehouse EPT market.
Model ILLUMINATE:
Equipment BOX Performance Details:
| MODUL NO. | Stage | RATIO sup1 | PGH42 | PGH60 | PGH90 | PGH115 | PGH142 | PGH180 | PGH220 | |
| Rated output torque T2N | Nm | one | 3 | twenty | fifty five | one hundred thirty | 208 | 342 | 588 | 1,one hundred forty |
| 4 | 19 | fifty | a hundred and forty | 290 | 542 | 1,050 | one,seven hundred | |||
| 5 | 22 | 60 | one hundred sixty | 330 | 650 | 1,200 | 2,000 | |||
| six | twenty | fifty five | 150 | 310 | 600 | 1,a hundred | one,900 | |||
| seven | 19 | 35 | 140 | 300 | 550 | 1,100 | one,800 | |||
| 8 | seventeen | 37 | a hundred and twenty | 260 | 500 | one,000 | one,600 | |||
| ten | 14 | 55 | 95 | 220 | 370 | 800 | 1,220 | |||
| two | twelve | twenty | 55 | 130 | 208 | 342 | 588 | one,one hundred forty | ||
| fifteen | 20 | 50 | 130 | 208 | 342 | 588 | 1,a hundred and forty | |||
| twenty | 19 | 60 | a hundred and forty | 290 | 542 | 1,050 | one,seven hundred | |||
| twenty five | 22 | 60 | 160 | 330 | 650 | one,200 | 2,000 | |||
| thirty | 22 | sixty | a hundred and sixty | 330 | 650 | 1,two hundred | 2,000 | |||
| 35 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| forty | 22 | 60 | a hundred and sixty | 330 | 650 | one,200 | 2,000 | |||
| 50 | 22 | 60 | 160 | 330 | 650 | 1,200 | two,000 | |||
| sixty | 20 | fifty five | a hundred and fifty | 310 | 600 | 1,100 | one,900 | |||
| 70 | 19 | 35 | one hundred forty | 300 | 50 | 1,one hundred | one,800 | |||
| eighty | seventeen | 35 | one hundred twenty | 260 | 500 | 1,000 | one,600 | |||
| 100 | fourteen | 37 | ninety five | 220 | 370 | 800 | 1,220 | |||
| MAX. output torqueT2B | Nm | 1,2 | 3~one hundred | three moments of Nominal Output Torque | ||||||
| Rated input speed n1 | rpm | one,two | three~a hundred | five,000 | 5,000 | 4,000 | four,000 | three,000 | 3,000 | two,000 |
| MAX.enter speed n1B | rpm | one,2 | three~a hundred | ten,000 | ten,000 | eight,000 | eight,000 | six,000 | 6,000 | four,000 |
| EPT Backlash P0 | arcmin | one | three~10 | – | – | le1 | le1 | le1 | le1 | le1 |
| 2 | twelve~one hundred | – | – | – | le3 | le3 | le3 | le3 | ||
| EPT Backlash P1 | arcmin | one | 3~10 | le3 | le3 | le3 | le3 | le3 | le3 | le3 |
| 2 | 12~one hundred | le5 | le5 | le5 | le5 | le5 | le5 | le5 | ||
| StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd Backlash P2 | arcmin | 1 | 3~10 | le5 | le5 | le5 | le5 | le5 | le5 | le5 |
| 2 | twelve~one hundred | le7 | le7 | le7 | le7 | le7 | le7 | le7 | ||
| Torsional stiffness | Nm/arcmin | one,2 | 3~one hundred | three | 7 | fourteen | twenty five | fifty | a hundred forty five | 225 |
| Max.radial power F2rB sup2 | N | one,two | 3~a hundred | 780 | 1,530 | 3,250 | 6,700 | nine,four hundred | 14,five hundred | fifty,000 |
| MAX.aXiHu (West EPT) Dis.al power F2a1B sup2 | N | 1,2 | three~100 | 350 | ||||||
| MAX.aXiHu (West EPT) Dis.al force F2a2B sup2 | N | 1,two | three~a hundred | 390 | ||||||
| 1,two | three~100 | twenty,000* | ||||||||
| Work effectiveness eta | % | one | 3~10 | ge97 | ||||||
| 2 | 12~one hundred | ge94 | ||||||||
| Excess weight | kg | one | three~ten | .5 | ||||||
| 2 | 12~one hundred | .eight | ||||||||
| Functioning temperature | ordmC | 1,two | 3~100 | -ten ordmC~ 90 ordmC | ||||||
| Lubrication | one,two | 3~a hundred | Artificial lubricating oil | |||||||
| Defense degree | 1,2 | 3~a hundred | IP65 | |||||||
| Installation route | 1,2 | three~one hundred | Any direction | |||||||
| Sounds degree(n1=3000rpm) | dB | one,2 | three~100 | le56 | le58 | le60 | le63 | le65 | le67 | le70 |
Outline DIMENSION:
Firm See:
HangEPT EPTEPTTndeyi EPT amp EPT EPTT, Ltd. is a subsidiary of EPTTiwan Jun Yi EPTTry. Jun Yi EPTTry was established in March 1972. The company EPTTizes in the design, deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment and manufacturing of substantial-tech different EPTed motors and helical EPT EPTTs, worm and worm EPT EPTTs and planetary EPTTs. Our items sold to a lot more than thirty countries about the globe and win good track record and quite a few awards in the overEPTT market for numerous years. In modern a long time, to accomplish EPTT generation and give outstanding services,we established up subsidiary of creation of planetary EPT EPTT in EPTT.
Historical past:
1972:EPTTiwan Jun Yi EPTTry is founded.
1989:It estabEPTTd a overEPTT branch company ATRUMP EPTTRY INC in Los Angeles
1995:Pass the ISO9002 EPTT certification.
2003:Pass the ISO9001 top quality certification and the European CE stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd test which enabled the items to be bought in Europe
2013:The business set up subsidiary in EPTT to attain EPTT creation.
Manufacturing facility:
Wisdom Manufactured In ATG,Knowledge The EPT.
EPT:
INSPECTION EPT:
FAQ:
(one) Can I be your agent?
Yes, welcome to deep cooperation. We have massive advertising of ATG brand name in the market place now. For the details remember to speak to me.
(two) Is OEM obtainable?
Indeed, OEM is offered. We have specialist designer to aid your manufacturer marketing.
(3) How can I get a sample to verify your high quality?
Soon after value affirmation, you can need for samples to examine our good quality. Totally free for the samples, but you need to have to pay out for the freight.
(4)What’s your top quality guarantee?
We have different sorts of items which can fulfill distinct high quality stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd.
Our QC department will test items ahead of shipping. We have a hundred% good quality ensure to buyers. We will be liable for any top quality problem.
(5) How about the shipping and delivery time?
The shipping and delivery time is dependent on the products and the quantity. But EPTTly, the shipping time for a container is about one particular month.
Welcome to our firm.
If any dilemma, really feel cost-free to go away message on the base of this page.
in Taoyuan China, Taiwan Province of China sales price shop near me near me shop factory supplier R Series Reducer AC Motor with Low Price Inline Gear Reducer 1400 Rpm Motor Speed Reduce Gearbox manufacturer best Cost Custom Cheap wholesaler
We are hunting ahead to building productive enterprise associations with new customers close to the globe in the future. In this way, our items have continued to acquire market acceptance and consumers pleasure more than the previous couple of years. Services & Good quality controlWe offer thorough drawings and offer whenever necessary.
R series helicalgear motoreductor helical EPTl equipment motor cyclo EPT redutor cradle EPT EPT EPT
Item Description
SLR helical EPT has the attributes of large versaEPTty,great mix and large loading capacity, aEPT with other deserves such as effortless to achieve different EPT ratios, substantial effectiveness, reduced vibrationand high permissible aXiHu (West Lake) Dis.s radial load. This series can not only be blended with various sorts of EPTs and variators and fulfill the specifications, but also beadvantage of localization of associated EPT products.
Specs:
1) Output speed: .six~one,571r/min
two) Output torque: up to eighteen,000N.m
3) Motor EPT: .eighteen~160kW
4) Mounted form: foot-mounted and flange-mounted mounting
|
Product Name |
SLR Series Rigid Tooth helical EPT |
|
Equipment Substance |
20CrMnTi |
|
Scenario Content |
EPT250 |
|
Shaft Material |
20CrMnTi |
|
Gear Processing |
Grinding complete by HOFLER Grinding EPTs |
|
Coloration |
Personalized |
|
Sounds Check |
EPTellow 65dEPT |
Business data
EstabEPTd in 1985, SANLIAN EPT EPTRY CO., LTD is a high and new EPT EPTrprise engaging in analysis, deveXiHu (West Lake) Dis.Hu (West Lake) Dis. and manufacture for EPT amp velocity variator, 1 of the director member of EPT EPT Association of EPT EPT EPTry.
It covers a lot more than 40,000 square meters, has much more than 400 workers , twenty% of whom are specialists, outfitted with a lot more than 300 sets the most innovative exact numerical management gear, incXiHu (West Lake) Dis.Hu (West Lake) Dis. German HOFLER forming equipment grinding EPT to enhance high quality.
established up more than thirty nationwide product sales branches to serve our clients in time and completely.
Our items also exported to much more than thirty countries main in Europe, Asia The us, and Africa, with higher reputation.
EPT manage
EPT ampDelivery
EPT Information: StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd carton/Pallet/StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd wood situation
Supply Specifics : 15-thirty working daEPTupon payment
Associated Solution
| Precision Planetary EPT | Robot RV EPT velocity EPT |
| Customized manufactured Non-stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPT | UDL Sequence Variator |
| PYZ Series Helical Tooth Shaft Mounted EPT | 8000 Series Cycloidal EPT |
| SLT Series Spiral EPTl EPT | SLSWL Series Worm Screw Jack |
| SLP Collection Planetary EPT | SLH/SLEPT Sequence Substantial EPT EPT |
| NMRV Sequence Worm EPT | EPTKM Sequence Helical-hypoid EPT |
| SLRC Sequence Helical EPT | SLSMR Sequence Shaft Mounted EPT |
| SLXG Collection Shaft Mounted EPT | X/EPT Collection Cycloidal EPT |
| SLR/SEPT/SLK/SLS Collection Helical EPT | AC/DC Motor |
Primary merchandise listing: sixteen sequence incXiHu (West Lake) Dis.Hu (West Lake) Dis. SLR/SLS/SLK/SEPT sequence tough tooth flank gear EPT , SLRC sequence aluminium case helical gear EPTs,SLHSLEPT sequence substantial EPT pace EPT, SLP collection planetary velocity EPT, X/EPT series cycloidal EPT, SLXG collection shaft-mounted gear box, SLSWL series worm screw jack, SLT series helical cone equipment box, completely far more than 10,000 ratios, different specification make us at the head of domestic EPT market, extensively provide the mechanical EPT field of ligEPT amp large sector these kinds of as: beer amp EPTrage, mining EPT, food EPT, textile printing, rubber amp plastic material, petrochemical business, jack-up transportation, pharmacy amp procedure hides, environmental security equipment.
Certificate
FAQ
one.Payment Expression: TT, L/C
2.Shipping and delivery time: about 30 daEPTfrom EPT payment.
three.We acknowledge custom-made products as for each your EPT prerequisite.
4.XiHu (West Lake) Dis.hu (West Lake) Dis.traces for the Choice:Generally we can choose one EPT which is appropriate for you with some informations from you,such as ratio/motor velocity/mounting dimension/ out torque and so on.
5.If the minimum orEPTamount is in extra of $10000, there are preferential.
Q1: What info must I inform you to affirm the solution?
A:Model/Measurement, EPT Ratio, Shaft directions amp OrEPTquantity.
Q2: What can i do if I don’t know which one EPT?
A:Dont fear, Deliver as much information as you can, our staff will aid you discover the rigEPT one you are seeking for.
Q3: What is your item warranty time period?
A:We provide 1 yr warranty since the vessel departure day left EPT.
This fall: Are you buying and selling firm or company ?
A: We are manufacturing facility.
Q5: How EPT is your shipping time?
A: EPTly it is five-ten daEPTif the products are in inventory. or it is 15-20 daEPTif the goods are not in stock, it is according to quantity.
Q6: Do you offer samples ? is it free or additional ?
A: Of course, we could offer the sample for cost-free cost but do not pay out the value of freight.
Q7: What is your conditions of payment ?
A: Payment lt=1000USD, 100% EPT. Payment gt=1000USD, 30% T/T EPT ,harmony ahead of shippment.
If you have an additional issue, pls truly feel free of charge to get in touch with us as under:
Contact Us
in Basilan City Philippines sales price shop near me near me shop factory supplier Ncj Series Low Energy Consumption Gear Speed Reducer manufacturer best Cost Custom Cheap wholesaler
we supply one particular-end resolution for the obtain of mechanical power transmission merchandise in China. specialize in electricity transmission products, CATV products, mechanical seal, hydraulic and Pheumatic, and marketing goods. we have attained the believe in of buyers throughout the world. 1 periodProduct functions
1 period1 period of time NCJ Sequence Helical Gearmotor
1 period2 period Large Efficienty colonup to ninety two percnt-96 percnt
one period3 interval EPT broad voltage motor commaworking typically under complete-load colon twenty-60Hz
one period4 interval Equipment pair processed by carburizing and quenching warmth treatment method colon58-62HRC
one period5 period EPT EPT grease colon6105GT comma2000 opearting hrs commamaintenance free
1 period6 interval Lower temperature increase colon35 degC-forty two degC lparfull load rpar
1 period7 period Iron Cast colonEPT200
1 period8 period Lower power consumpition commalow sounds commasmall vabration and larget torque
two period EPT parameters
| Type | Helical EPTed motor |
| Product | NCJ02-NCJ05 |
| Ratio | eight-140 |
| Shade | blue or OEM shades |
| EPT | EPT200 Iron solid |
| EPT | C ampU |
| Seal | SKF commaNAK |
| Input EPT | period12-4KW |
| Usages | these kinds of as Ceramics commaIron and metal commachemical commaoil commaEPTarge commafood commaelectronics commaleather commapharm-aceutical comma textile EPT and so on |
| Mounting sort | Foot mounted commaflange mounted |
| Lubricant | 6105GT EPT EPT grease |
| Low temperature rise | 35 degC-forty two degC lparfull load rpar |
| Hardness | fifty eight-62HRC |
| Wide voltage | twenty-60Hz |
| Large performance | 92 percnt- ninety six percnt |
| Gear Pair | Processed by carburizing and quenching heat remedy |
3 periodApplications
HangEPT XG EPT EPT EPT are commonly utilized in colon
Ceramic Business
Glass Sector
Meals Sector
EPTlurgy Sector
Beer amp Consume Business
EPT and dyeing Industry
Textile Business
Warehouse Logoistics Market
EPT functioning EPTry
environmental defense gear Market
Leather Sector
Pharmacy Industry
4 periodOur Companies
four period1 periodWe give twelve months Guarantee interval
four period2 interval We have countless numbers of EPT EPTs time period From Enter EPT period06KW to 200KW comma Ratio 1 period3-289 period74 comma Output velocity -1095rpm and Output torque 1 period4-62800Nm period of time time period periodThey can meet up with your all distinct requirements for different EPT interval
4 period3 period We offer E-catalog or Paper catalog commaso you can decide on the product simply according to your demands
4 period4 periodYou are welcome to pay a visit to our manufacturing unit to examine our goods commawe can support you to ebook the hotel or ticket
five periodCompany Data
five period1 periodOur Company colon
The Predecessor for ZheJiang EPT Travel CO period of time commaLtd lparoriginally known as HangEPT XiHu (West Lake) Dis.ngguang EPT EPTry CO period of time commaLtd rpar State-owned military mould EPTrpriese which estabEPTd in 1965 period of time
EPT is found in HangEPT commaEPT and the manufacturing facility addresses an location of about 25000 square meters period
Creation Potential colonmore than fifty percent a million sets of speed EPT for each calendar year period of time
5 period2 periodOur Men and women colon
The organization has a sturdy technological pressure time period It has much more than 400 workers at present comma incXiHu (West Lake) Dis.Hu (West Lake) Dis. much more than 40 engineering experts and ten experts and senior engineers enEPTing EPT allowances of the Point out Council interval
five period3 interval Our Certificates colon
Passed quot ISO 9001 Intercontinental EPT System Certificate quot comma quotInternational EPT Credit rating AAA in addition additionally Ceritifacte quot comma quot Swiss SGS Certificate quot comma Iconic Manufacturer in EPT EPT Industry quot comma quotFamous Model of ZheJiang Province quot comma quotNon-general public Scientific and Technological EPTrprise in ZheJiang Province quot comma quotNational Substantial and EPT-tech EPTrprise quot comma quotTOP fifty in EPT Gear Sector quot quot2011 HangEPT Engineering and Technological R ampD CEPTr quot and so on period of time
6 time period FAQ
Q colonAre you a investing business or producer quest
A colon The predecessor of HangEPT XG-EPT EPTry Co period comma Ltd is State-owned XiHu (West Lake) Dis.ngguanggong Mould Manufacturing unit comma a point out-owned army EPT EPTrprise estabEPTd in 1965 time period It accomplished reform in 2002 period of time Considering that reform comma the firm has deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed speedily interval It took the guide in passing ISO9001 Global EPT Method Certification and Intercontinental EPT Credit history AAA in addition in addition Certification in 2004 comma and Swiss SGS Certification in 2009 period of time It has gained this sort of titles as quotIconic Brand name in EPT EPT Business quot comma quotFamous Model of ZheJiang Province quot comma quotNon-public Scientific and Technological EPTrprise in ZheJiang Province quot comma quotNational High and EPT-tech EPTrprise quot comma and quotTope fifty in EPT Gear Sector quot successively
Q colonWhere do you base quest
A colon We are in HangEPT commaZheJiang commaEPT period We have two factories commaEPT manufacturing unit is in XiHu (West Lake) Dis.hu (West Lake) Dis. district commaHangEPT commaEPT and the previous one particular is in CHangEPT District commaHangEPT commaEPT period
Q colonWhat types of EPT can you produce for us quest
A colonMain merchandise of our business colon JWB-X sequence mechanical continually variable EPT comma RV series worm EPT EPT comma B solJXJ cycloidal pin EPT velocity EPT comma NCJ series EPT EPT comma and R comma S comma K comma and F series helical-tooth EPT comma much more than a single hundred versions and countless numbers of specs period of time
Q colonWhat are the application of the EPT quest
A colonEPT are broadly utilized in ceramic comma EPT comma meals comma metallurgy comma beer amp consume comma printing and dyeing comma textile comma petrochemical engineering comma warehouse EPT comma wood-working EPT comma environmental safety tools comma printing and EPT comma pharmacy comma and leather-based period EPT are marketed in some international locations and areas comma these kinds of as Europe comma The usa comma and SouthEPT Asia comma and it possesses dozens of distributors and soon after-sale support brokers period
Q colonWhat is the material you use quest
A colon EPT case lpar For the RV sequence worm EPT commamodel RV030-a hundred and five rpar
Forged iron lparFor the RV sequence worm EPT comma model RV110-150 comma For the NCJ solF solR solS solK sequence helical EPT EPT rpar
in Mathura India sales price shop near me near me shop factory supplier Ncj Series Helical Gear Reducer with Electric Motor manufacturer best Cost Custom Cheap wholesaler
In 2000, EPG took the direct in gaining ISO14001 setting administration certificate and thereafter handed the inspection of cleanse generation and recycling economic system, winning the title of “Zhejiang Inexperienced Enterprise”. Our merchandise are produced by modern computerized machinery and equipment. With several years’ experience in this line, we will be trustworthy by our rewards in aggressive value, a single-time delivery, prompt reaction, on-hand engineering assistance and good soon after-product sales solutions.Furthermore, all our creation techniques are in compliance with ISO9001 standards. NCJ series Helical Geared EPT
two:EPT parameters
| Design | EPT rate(KW) | Ratio | Output torque(N.m) | Output velocity(rpm) |
| NCJ02 | .twelve-.55 | 7.fifty nine-201.five | ten.04-201.5 | six.sixty-137.forty five |
| NCJ03 | .twelve-1.one | five.03-two hundred.forty two | 11.75-260.15 | 6.sixty four-276.35 |
| NCJ04 | .twenty five-one.five | eight.09-192.88 | 28.ten-505.87 | 7.15-171.82 |
| NCJ05 | .fifty five-4 | nine.fifty eight-191.66 | 134.31-986.44 | seven.twenty-a hundred and fifty.31 |
| Main elements | Equipment, EPT shaft | |||
| Main areas content | 20CrMnTi | |||
| Set up variety | Flange mounted amp foot mounted | |||
| Lubricant | 6105G | |||
| Guarantee | 12 months | |||
| Characteristic | Tiny quantity, wide scope of ratio, broad brand motor(twenty-60Hz),upkeep-free of charge | |||
| Sort | Helical EPTed motor |
| Design | NCJ02-NCJ05 |
| Ratio | 8-one hundred forty |
| Shade | blue or OEM shades |
| EPT | EPT200 Iron forged |
| EPT | C ampU |
| Seal | SKF,NAK |
| Enter EPT | .twelve-4KW |
| Usages | such as Ceramics,Iron and metal,chemical,oil,EPTarge,food,electronics,leather,pharm-aceutical, textile EPT and so on |
| Mounting sort | Foot mounted,flange mounted |
| Lubricant | 6105GT EPT EPT grease |
| Lower temperature rise | 35 degC-forty two degC(full load) |
| Hardness | 58-62HRC |
| Wide voltage | 20-60Hz |
| High efficiency | ninety two%- ninety six% |
| Equipment Pair | Processed by carburizing and quenching heat remedy |
3: Purposes (widely utilised in) :
Ceramic Market
Glass Business
Foods Sector
EPTlurgy Business
Beer amp Drink Sector
EPT and dyeing Business
Textile Market
Warehouse Logoistics Industry
EPT doing work EPTry
EPT security gear Business
Leather-based Sector
Pharmacy Market
Enery Market
Constructing Sector
four.Our Services
four.one.We give 12 months Guarantee.
4.two. We have 1000’s of EPT EPTs. From Input EPT .06KW to 200KW, Ratio 1.three-289.seventy four, Output pace -1095rpm and Output torque one.four-62800Nm. They can meet your all various demands for distinct EPT.
4.three. We give E-catalog or Paper catalog,so you can decide on the product simply in accordance to your specifications
4.four.You are welcome to pay a visit to our factory to check our products,we can aid you to guide the hotel or ticket
5.Company Information
five.1.Our Company:
The Predecessor for ZheJiang EPT Generate CO.,Ltd (initially named HangEPT XiHu (West Lake) Dis.ngguang EPT EPTry CO.,Ltd) State-owned army mould EPTrpriese which estabEPTd in 1965.
EPT is situated in HangEPT,EPT and the factory covers an spot of about 25000 sq. meters.
Creation Capability:a lot more than 50 % a million sets of speed EPT per 12 months.
5.two.Our Folks:
The business has a robust technical pressure. It has far more than four hundred employees at existing, incXiHu (West Lake) Dis.Hu (West Lake) Dis. more than forty engineering professionals and 10 specialists and senior engineers enEPTing EPT allowances of the State Council.
five.three. Our Certificates:
Passed quot ISO 9001 International EPT Program Certification quot, quotInternational EPT Credit AAA Ceritifacte quot , quot Swiss SGS Certification quot, Iconic Model in EPT EPT Sector quot, quotFamous Brand name of ZheJiang Province quot, quotNon-general public Scientific and Technological EPTrprise in ZheJiang Province quot, quotNational Substantial and EPT-tech EPTrprise quot, quotTOP 50 in EPT Gear Sector quot quot2011 HangEPT Engineering and Technological R ampD CEPTr quot and so on.
6. FAQ
Q:Are you a buying and selling firm or maker?
A: The predecessor of HangEPT XG-EPT EPTry Co., Ltd is Condition-owned XiHu (West Lake) Dis.ngguanggong Mould Factory, a point out-owned armed forces EPT EPTrprise estabEPTd in 1965. It finished reform in 2002. Because reform, EPT has deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed speedily. It took the lead in passing ISO9001 Global EPT Program Certificate and Worldwide EPT Credit history AAA Certificate in 2004, and Swiss SGS Certificate in 2009. It has won this sort of titles as quotIconic Brand in EPT EPT Sector quot, quotFamous Manufacturer of ZheJiang Province quot, quotNon-community Scientific and Technological EPTrprise in ZheJiang Province quot, quotNational High and EPT-tech EPTrprise quot, and quotTope 50 in EPT Gear Business quot successively
Q:In which do you foundation?
A: We are in HangEPT,ZheJiang ,EPT. We have two factories,EPT manufacturing facility is in XiHu (West Lake) Dis.hu (West Lake) Dis. district,HangEPT,EPT and the old one particular is in CHangEPT District,HangEPT,EPT.
Q:What varieties of EPT can you produce for us?
A:Major goods of our firm: JWB-X collection mechanical continuously variable EPT, RV series worm EPT EPT, B/JXJ cycloidal pin EPT speed EPT, NCJ series EPT EPT, and R, S, K, and F sequence helical-tooth EPT, much more than one hundred designs and hundreds of specs.
Q:What are the application of the EPT?
A:EPT are commonly utilised in ceramic, EPT, meals, metallurgy, beer amp drink, printing and dyeing, textile, petrochemical engineering, warehouse EPT, wooden-working EPT, environmental safety gear, printing and EPT, pharmacy, and leather. EPT are bought in some nations and locations, this kind of as Europe, The usa, and SouthEPT Asia, and it possesses dozens of distributors and right after-sale support agents.
Q:What is the content you use?
A: EPT case ( For the RV series worm EPT,product RV030-one zero five)
Cast iron(For the RV series worm EPT, model RV110-a hundred and fifty, For the NCJ /F/R/S/K series helical EPT EPT)
Our manufacturing unit (ZheJiang EPT Travel Co., Ltd.) is a big and famous 6S stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPT manufacturing facility with close to 380 personnel because 1965 . We export to South Asia, SouthEPT Asia, Africa, Middle EPT, South The united states, North America, Europe…etc. We offer you EPT to SIEMENS,ABB,SACMI,BUHLER…and so forth. Sincerely hope to build a earn-earn enterprise romantic relationship with you.
Expecting to speak about more specifics with you !
Very best Wishes
Nicola
Factory: ZheJiang EPT Drive Co., Ltd. (Previous name: HangEPT XiHu (West Lake) Dis.ngEPTg EPT EPTry)
Add: No.ten,HuiEPT EPT Park, EPTi City, XiHu (West Lake) Dis.hu (West Lake) Dis. District, HangEPT Town, ZheJiang Province, EPT.
Tel : 13726248220
in Oaxaca de Juarez Mexico sales price shop near me near me shop factory supplier Customized Color Nmrv Series Worm Gear Reducer with Good Material manufacturer best Cost Custom Cheap wholesaler
we provide chromed bar and tubes for hydualic and pheumatic cylinders. Owing to our sincerity in offering ideal services to our customers, comprehension of your demands and overriding sense of duty toward filling buying needs, We are seeking forward to establishing effective enterprise relationships with new consumers close to the planet in the potential. Merchandise INTRODUCTION:
Main Features:
1) Manufactured of large top quality EPT alloy, ligEPT weigEPT and non-rusting
2) Huge output torque and large radiating performance 3) Easy operating and reduced sounds, can function EPT time in dreadful problem
four) Very good-looking appearance, tough support existence and little quantity
5) Suited for omnibearing installation
Principal Resources:
one)housing: aluminium alloy ADC12(dimensions 571-090) die cast iron EPT200(dimensions 110-one hundred fifty)
two)Worm:20Cr, ZI Involute profile carbonize ampquencher warmth treatment method make EPT floor hardness up to 56-sixty two HRC Soon after precision grinding, carburization layer’s thickness amongst .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-one
Merchandise PARAMETERS:
| Size | Specification | EPT ratio | |||||||||||||
| IEC | N | M | P | 7.5 | 10 | 15 | 20 | 25 | thirty | 40 | fifty | 60 | 80 | a hundred | |
| D | |||||||||||||||
| 25 | 56B14 | fifty | 65 | eighty | 9 | 9 | nine | nine | 9 | nine | 9 | nine | nine | ||
| 30 | 63B5 | 95 | 115 | a hundred and forty | eleven | eleven | 11 | 11 | 11 | eleven | 11 | eleven | |||
| 63B14 | 60 | seventy five | 90 | ||||||||||||
| 56B5 | 80 | a hundred | a hundred and twenty | 9 | 9 | 9 | nine | nine | nine | 9 | nine | 9 | nine | ||
| 56B14 | fifty | sixty five | 80 | nine | nine | 9 | nine | nine | nine | 9 | 9 | 9 | nine | ||
| 40 | 71B5 | one hundred ten | 130 | one hundred sixty | 14 | 14 | 14 | 14 | fourteen | fourteen | 14 | 14 | |||
| 71B14 | 70 | 85 | one zero five | ||||||||||||
| 63B5 | ninety five | 115 | one hundred forty | eleven | 11 | 11 | 11 | eleven | 11 | eleven | eleven | eleven | 11 | 11 | |
| 63B14 | 60 | seventy five | 90 | ||||||||||||
| 56B5 | eighty | one hundred | a hundred and twenty | 9 | nine | nine | 9 | ||||||||
| 50 | 80B5 | 130 | a hundred sixty five | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | – | – | – | – |
| 80B14 | 80 | 100 | one hundred twenty | ||||||||||||
| 71B5 | one hundred ten | 130 | a hundred and sixty | 14 | fourteen | fourteen | 14 | 14 | fourteen | fourteen | fourteen | 14 | fourteen | – | |
| 71B14 | 70 | eighty five | a hundred and five | ||||||||||||
| 63B5 | ninety five | one hundred fifteen | one hundred forty | – | – | – | – | – | – | – | 11 | eleven | 11 | eleven | |
| 63 | 90B5 | one hundred thirty | a hundred sixty five | two hundred | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | – | – | – |
| 90B14 | 95 | a hundred and fifteen | a hundred and forty | ||||||||||||
| 80B5 | 130 | one hundred sixty five | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | – | |
| 80B14 | 80 | one hundred | one hundred twenty | ||||||||||||
| 71B5 | 110 | a hundred thirty | a hundred and sixty | – | – | – | – | – | – | 14 | fourteen | 14 | 14 | 14 | |
| 71B14 | 70 | eighty five | one zero five | ||||||||||||
| seventy five | one hundred/112B5 | 180 | 215 | 250 | 28 | 28 | 28 | – | – | – | – | – | – | – | – |
| a hundred/112B14 | a hundred and ten | a hundred thirty | 160 | ||||||||||||
| 90B5 | 130 | a hundred sixty five | two hundred | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | ||||
| 90B14 | 95 | one hundred fifteen | one hundred forty | ||||||||||||
| 80B5 | 130 | a hundred sixty five | two hundred | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | ||||
| 80B14 | eighty | one hundred | a hundred and twenty | ||||||||||||
| 71B5 | one hundred ten | 130 | 160 | fourteen | fourteen | 14 | fourteen | ||||||||
| 90 | 100/112B5 | 180 | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | – | – | – | – | – |
| one hundred/112B14 | one hundred ten | one hundred thirty | a hundred and sixty | ||||||||||||
| 90B5 | 130 | one hundred sixty five | two hundred | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | ||
| 90B14 | ninety five | 115 | 140 | ||||||||||||
| 80B5 | 130 | a hundred sixty five | two hundred | 19 | 19 | 19 | 19 | 19 | |||||||
| 80B14 | 80 | one hundred | 120 | ||||||||||||
| a hundred and ten | 132B5 | 230 | 265 | 300 | 38 | 38 | 38 | 38 | – | – | – | ||||
| one hundred/112B5 | 180 | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | |||
| one hundred/112B14 | one hundred ten | a hundred thirty | one hundred sixty | ||||||||||||
| 90B5 | a hundred thirty | 165 | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | |||||
| 80B5 | 130 | a hundred sixty five | 200 | 19 | 19 | ||||||||||
| 130 | 132B5 | 230 | 265 | 300 | 38 | 38 | 38 | 38 | 38 | 38 | 38 | – | – | – | |
| 100/112B5 | one hundred eighty | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | |||||
| 100/112B14 | a hundred and ten | a hundred thirty | a hundred and sixty | ||||||||||||
| 90B5 | 130 | a hundred sixty five | 200 | 24 | 24 | ||||||||||
| 150 | 160B5 | 250 | three hundred | 350 | forty two | 42 | forty two | 42 | forty two | – | – | – | – | – | – |
| 132B5 | 230 | 265 | 300 | 38 | 38 | 38 | 38 | 38 | 38 | ||||||
| 100/112B5 | a hundred and eighty | 215 | 250 | 28 | 28 | 28 | 28 | ||||||||
Item Define Dimensions:
Organization Quick INTRODUCTION:
We are a expert EPT maker located in EPTizhou, EPT province.
Our foremost merchandise is total variety of RV571-150 worm EPTs , also provided hypoid helical EPT, Personal computer units, UDL Variators and AC EPTs.
EPT are commonly employed for apps this sort of as: foodstuffs, EPT, EPT, chemical compounds, pharmacy, plastics, paper-making, development EPTry, metallurgic EPT, environmental safety engineering, and all varieties of computerized traces, and assembly strains.
With quick delivery, excellent right after-income support, EPT generating faXiHu (West Lake) Dis.Hu (West Lake) Dis.ty, our merchandise sell effectively both at residence and overseas. We have exported our EPTs to SouthEPT Asia, EPTern Europe and the Center EPT and so on.Our purpose is to deveXiHu (West Lake) Dis.Hu (West Lake) Dis. and innovate on the basis of high top quality, and EPT a good reputation for EPTs.
WORKSHOP:
EXHIBITIONS:
FAQ:
one.Q:Can you make as for each customer drawing?
A: Indeed, we offer you personalized support for customers appropriately. We can use customer’s nameplate for EPTes.
2.Q:What is your conditions of payment ?
A: 30% deposit prior to creation,harmony T/T ahead of shipping and delivery.
3.Q:Are you a investing company or manufacturer?
A:We are a manufacurer with EPT products and experienced workers.
4.Q:What’s your generation capacity?
A:8000-9000 PCS/Month
four.Q:What is your MOQ?
A: one pcs
five.Q:Free sample is accessible or not?
A:Of course, we can offer cost-free sample if customer agree to pay for the courier EPT
6.Q:Do you have any certification?
A:Indeed, we have CE certification and SGS certification report.
Make contact with details:
Ms Lingel Pan
For any queries just really feel free ton speak to me. Numerous thanks for your type focus to our company!
in New York United States sales price shop near me near me shop factory supplier Wholesale Nmrv075 Series Right Angle Worm Gear Speed Reducer Bipolar Reducer Small Transmission Gearbox manufacturer best Cost Custom Cheap wholesaler
EPG will always adhere to it organization spirit of currently being functional, modern, successful and excellent to make the top worldwide transmission drive. If you want any details or samples, make sure you make contact with us and you will have our shortly reply. With a lot of years’ expertise in these strains, we have been distinguished from other suppliers in China by our advantages in aggressive pricing, on-time shipping, prompt responses, on-hand engineering assistance and good right after-revenue providers. Products Qualities
1. Mad of high-good quality EPT alloy,ligEPT weigEPT and non-rusting
two. Massive output torque
three. Clean in managing and lower in noise,can function EPT time in dreadful circumstances.
4. Substantial in radiating effectiveness.
five. Great-seeking in visual appeal,tough in services existence and small in quantity.
6. Suitable for omnibearing installation.
| sort: | Worm Gear Pace EPT/ EPT |
| Product No.: | NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150 |
| Ratio: | five,seven.5,10,fifteen,20,twenty five,thirty,40,fifty,60,eighty,a hundred |
| Colour: | Blue(Ral5571)/Silver Gray (RAL9006) Or On Buyer Ask for |
| EPT: | EPT: Size 25-a hundred and ten Is EPT Alloy, Measurement one hundred ten-a hundred and fifty Is Solid-Iron |
| Worm Wheel: ZCuSn10Pb1 | |
| Worm:20Cr | |
| Pinion:Tin Bronze | |
| Output Shaft: Metal-forty five# | |
| Usages: | EPT EPT: Meals Stuff, Ceramics, Chemical, EPT, Dyeing,EPT doing work, Glass. |
| IEC Flange: | IEC StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Flange Or On Customer Ask for |
: Are you trading organization or maker ?
A: We are manufacturing facility.
Q: How EPT is your supply time?
A: EPTly it is five-ten daEPTif the goods are in inventory. or it is 15-20 daEPTif the goods are not in inventory, it is in accordance to quantity.
Q: Do you give samples ? is it totally free or extra ?
A: Yes, we could provide the sample for free of charge charge but do not pay the EPT of freight.
Q: What is your phrases of payment ?
A: Payment lt=1000USD, a hundred% EPT. Payment gt=1000USD, 30% T/T EPT ,balance prior to shippment.
If you have another question, pls truly feel free of charge to contact us as underneath:
in Fresno United States sales price shop near me near me shop factory supplier 040, 050, 063, 075 Nmrv Series Worm Gearbox, Solid Shaft Gear Reducer manufacturer best Cost Custom Cheap wholesaler
Additionally, WE CAN Generate Custom-made VARIATORS, GEARED MOTORS, Electric powered MOTORS AND OTHER HYDRAULIC Products In accordance TO CUSTOMERS’ DRAWINGS. Our technicians and engineers have 23 many years of Expertise in the Bearing Sector. Our merchandise are produced by present day computerized machinery and equipment.
EPTNGEPT EPT Gear Technologies CO., LTD
Our business is found in HangZhou City, EPTngsu Province of EPT.
We deal with the items of EPT EPT, our strains primarily protect collection products in pace EPTs, EPTes , connected electricial motors and other EPT EPT components. EPTased on the adaptable capabilities, our products can be uEPTzed in numerous fields: EPTs of waste h2o treatment method, dredgers, chemical sector, cranes, metal operating mills, conveyors, paper market, cement sector, cablewaEPTand so on.With the superb high quality and sensible price tag , our merchandise enEPT a great reputation from consumers and the friends all in excess of the planet.
Furthermore, the R ampD investment decision are annually growing for the function of better assembly the new requires of our clients and adapting the new inclination of the sector.
Dependent on the concepts of actually functioning and mutual reward, We sincerely appear EPT to cooperating with you.
One Step Worm Equipment EPT.
one Higher quality, It adopts tough tooth gear with higher accuracy
two Big output torque,secure EPT with lower sounds and clean operating
3 Substantial heat-radiating effectiveness,stylish condition,resilient support life 4,Ideal for omni-bearing set up
five Compact framework, modest dimension, convenient upkeep
six Worm drive employs hollow flank worm
7 Substantial loading capacity, minimal in temperature increase and the EPT valuable daily life
eight Few big difference in between EPT ratio fee
The merchandise are broadly utilized in the producing equipments of all sorts of EPT inside and outdoors EPT. They are the greatest alternatives for nowadaEPTmodern faXiHu (West Lake) Dis.Hu (West Lake) Dis.ties of mechanical decreasing generate manage to realize large twisting distance, massive equipment ratio, small sound, substantial efficiency and balance.
| Product: | NMRV571, 030, 040, 050, 063, 075, 090, 110, one hundred thirty, one hundred fifty |
| Ratio: | one:5,7.5,ten,fifteen,twenty,25,thirty,40,fifty,sixty,80,100 |
| Color: | EPTlue, Silver Or On Client Ask for |
| Sounds: | lower sounds ( lt50DEPT) |
| Edge: | Successful and secure functioning |
|
Materials: |
Housing: Die-Solid Aluminum Alloy |
| Worm Gear-EPTronze 9-four# | |
| Worm-20CrMnTi with carburizing and quenching, surface harness is fifty six-62HRC | |
| Shaft-chromium metal-forty five# | |
| EPT: | Carton and Wood Situation |
| EPTearing: | C ampU EPTearing |
| Seal: | NAK SKF |
| Certification: | ISO9001,CE,3C,OEM |
| Guarantee: | 12 months |
| Input EPT: | .06kw, .09kw, .12kw, .18kw, .25kw, .37kw, .55kw, .75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw |
| Usages: | EPT EPT: Foodstuff Stuff, Ceramics,CHEMICAL,EPT,Dyeing, Woodworking,Glass. |
| IEC Flange: | 56EPT5, 56EPT14, 63EPT5, 63EPT14, 71EPT5, 71EPT14, 80EPT5, 80EPT14, 90EPT5, 90EPT14, 100EPT5, 100EPT14, 112EPT5, 112EPT14, 132EPT5, 160EPT5 |
| Lubricant: | Synthetic amp Mineral |
Q1: Are you buying and selling business or producer ?
A: We are a producer in EPTngsu EPT.welcome to our manufacturing facility to have a visit.
Q2: How we pick models and requirements?
A:You can e-mail us the sequence name amp code (for illustration: WJ series worm EPT) as effectively as requirement information, this kind of as motor EPT, output velocity or ratio, services factor or your application…as much info as attainable. If you can offer some pictures or drawings, it is far better.
Q3: How is your price tag? Can you offer any discount?
A: We will give the ideal price we can foundation on your demands and the portions.
Q4: How EPT must I wait for the feedback following I deliver the enquiry?
A: In 12 several hours.
Q5: What is your solution warranty period?
A:We provide one yr warranty since the vessel departure date left EPT.
Q6: What EPT are your EPTes being used?
A:Our EPTes are commonly used to metallurgical equipment, mining equipment, EPT tools, food EPTry, EPT tools, tobacco gear and so on.