DC motor is a rotating motor that can convert DC electric energy into mechanical vitality (DC motor) or mechanical power into DC electric powered strength (DC generator). It is a motor that can convert DC and mechanical energy into one particular an additional. When it runs as a motor, it is a immediate current motor, which converts electrical energy into mechanical strength when it runs as a generator, it is a immediate present generator, which converts mechanical power into electrical power.
|Solution Identify||industrial sewing device servo 24kv DC Motor|
|Motor Type||DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
|Composition construction||The composition of DC motor must consist of two parts: stator and rotor. The static portion of DC motor is referred to as stator. The primary perform of stator is to produce magnetic discipline, which is composed of foundation, main magnetic pole, commutation pole, end cap, bearing and brush unit. Managing element is referred to as rotor, whose primary purpose is to produce electromagnetic torque and inductive electromotive pressure. It is the hub of vitality conversion of DC motor. So it is also frequently referred to as armature, which consists of rotor, armature main, armature winding, commutator and enthusiast.|
|Torque variety||1.5 ~180kNm|
|Security degree||IP23, IP44|
|Working pace||Constant Speed /Low Velocity /Change Velocity /Large Speed Other|
|Principal classification||DC Motor is a machine that converts mechanical energy into DC power. It is mostly utilized as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation power offer of alternator. Despite the fact that in spots the place DC electrical power is essential, AC power rectifier is also utilized to change AC into DC energy, but from some aspects of performance, AC rectifier energy provide can not fully replace DC generator.|
|Software||DC motors are broadly utilised in tape recorders, online video recorders, video clip discs, electrical shavers, hair dryers, digital watches, toys and so on.|
|Maintenance strategy||Professional motor upkeep heart motor maintenance approach: cleaning stator and rotor – replacing carbon brush or other parts – vacuum F force dipping paint – drying – Calibration harmony.
1. Use atmosphere should be always dry, motor surface area must be held thoroughly clean, air consumption must not be hindered by dust, fibers and other road blocks.
2. When the thermal safety of the motor carries on to work, it ought to be ascertained whether the fault will come from the motor or the overload or the placing worth of the protecting gadget is as well lower. After getting rid of the fault, it can be place into procedure.
three, make certain that the motor is nicely lubricated for the duration of procedure. The standard motor runs for about 5000 hrs, that is to say, lubricating grease need to be extra or replaced. When bearing overheating or lubricating deterioration is located in procedure, the hydraulic force should change lubricating grease in time. When changing grease, the aged grease need to be taken out, and the oil groove of bearing and bearing include should be washed with gasoline. Then ZL-3 lithium grease need to be filled with one/2 (two poles) and two/three (four poles, 6 poles and 8 poles) of the cavity among the internal and outer rings of the bearing.
four. When the existence of the bearing is more than, the vibration and sounds of the motor will improve obviously. When the radial clearance of the bearing reaches the adhering to value, the bearing need to be replaced.
five, when getting rid of the motor, it is Okay to remove the rotor from the shaft extension or the non extension end. If it is not necessary to unload the fan, it is much more convenient to take out the rotor from the non-axle extension finish. When pulling out the rotor from the stator, the stator winding or insulation must be prevented from getting ruined.
6. When replacing the windings, the type, dimensions, turns and gauges of the unique windings should be recorded. When these info are misplaced, they need to be received from the maker and the authentic designed windings must be changed at will, which frequently deteriorates a single or numerous functionality of the motor or even helps make it unattainable to use them.