Merchandise Description
Brush Brushless Planetary DC Equipment Motor 22 32 42 52 fifty eight sixty 80 ninety mm Size  Requirements:

Building:	BRUSH / BRUSHLESS
Earth Gear MOTOR DIAMETER:	16mm / 22mm / 25mm / 28mm / 32mm / 36mm/ 42mm / 45mm / 52mm / 56mm / 58mm / 72mm / 82mm / 92mm / 120mm
VOLTAGE:	6V / twelve V / 24 V / 36V / forty eight V (Can be CZPTized)
RATED Power (watts):	1W / 5W / 10W / 20W / 25W / 40W / 60W / 90W / 120W / 150W / 180W / 200W / 300W  ……750W
MOTOR RATED Speed(rpm):	5RPM / 10RPM / 20RPM / 50RPM / 100RPM/ 300RPM/ 500RPM / 750RPM / 900RPM / 1000RPM / / 1500RPM / 2000RPM / 2500RPM / 3000RPM (Can be CZPTized per your requirements)
Stage OF Protection:	IP 20 / IP forty four / IP fifty five / IP sixty five (Can be CZPTized)
REDUCTION RATIO:	one Phase	two Levels			3 Levels	four Stages	5 Levels
	3.3 / 4.6 / 5.seven…	11.two / thirteen.7 / 15.five / 19.two / 26.9…			37.seven / fifty.nine / 52.1 / seventy one.2 / ninety nine.5 / 102 / 121 / 139…	174 / 188 / 241 / 264 / 334 / 369 / 462 / 516 / 721…	669 / 810 / 977 / 1120 / 1367 / 1549 / 1911 / 2142 / 2672 / 3439 / 3736…
	500RPM to 2000RPM	100RPM to 500RPM			20RPM to 150RPM	4RPM to 30RPM	.8RPM to 5RPM
	Output Torque Assortment: .5kgf.cm to 5000kgf.cm ( Primarily based on Distinct Dimension Motors and Speed Variety)
SHAFT Measurement:	Diameter range: 3mm to 19mm, keyway / D-minimize / Bare sorts ( Can be CZPTized)
Accessories:	Encoder / brake / Guide Wires / Connector (Can be CZPTized)

Note : Diverse dimensions motors have different equipment ratios, you should share your required motor speed and torque so we can advise a suitable model for you!

Other Dimension Planetary Gear Motor Information:

BRUSH	16mm	PG16M050	Simply click for a lot more information
	22mm	PG22M180	Click on for more specifics
	25mm	PG25M370	Click on for more details
	28mm	PG28M395	Click on for much more specifics
	32mm	PG32GR	Click on for far more details
		PG32M555	Click for much more specifics
	36mm	PG36GR	Simply click for a lot more details
		PG36M555	Click for more particulars
	42mm	PG42M775	Simply click for much more particulars
	45mm	PG45M775	Click on for far more particulars
		PG45MZY45	Click for a lot more specifics
	56mm	PG56MZY58	Click on for more particulars
		PG56-63ZY125	Click on for more particulars
	72mm	PG72-71ZY110	Click for much more particulars
	82mm	PG82-80ZY115	Simply click for a lot more details
BRUSHLESS	25mm	PG25BL25	Click on for more details
	28mm	PG28BL28	Click on for much more specifics
	32mm	PG32BL32	Click for more details
	36mm	PG36BL36	Click for a lot more information
	42mm	PG42BL42	Simply click for a lot more details
	56mm	PG56-57ZWN55	Simply click for more particulars
Did not discover the appropriate design? Send me your specifications! →

Related Products

Business Profile
HangCZPT Leison Motor Co. Ltd is a manufacturer and exporter of various of motors with in excess of ten many years encounter.
Our merchandise ranges include:
1) DC Brush motor: 6-130mm diameter, .01-1000W output electricity
2) DC Spur Equipment Motor: 12-110mm diameter, .1-300W output electricity
3) DC Planetary Gear Motor: 10-82mm diameter, .one-100W output power 
four) Brushless DC Motor: 28-110mm, 5-1500W output power 
five) Stepper Motor: NEMA 08 to NEMA forty three, Can with gearbox and direct screw
six) Servo Motor: 42mm to 130mm diameter, fifty-4000w 
7) AC Equipment Motor: forty nine to 100mm diameter, 6-a hundred and forty output power 

 Production Tools

Certifications

CZPTer Check out and Fair 

FAQ

Q: What’s your principal items?
A:We at present produce Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors and many others. You can examine the specifications for above motors on our site and you can e-mail us to suggest required motors per your specification too.

Q:How to decide on a suitable motor?
A:If you have motor photos or drawings to show us, or you have thorough specs like voltage, speed, torque, motor size, functioning method of the motor, required daily life time and noise stage and so on, you should do not hesitate to permit us know, then we can recommend suitable motor for each your ask for appropriately.

Q: Do you have CZPT services for your regular motors?
A:Of course, we can personalize for each your ask for for the voltage, speed, torque and shaft dimensions/form. If you require further wires/cables soldered on the terminal or require to insert connectors, or capacitors or EMC we can make it way too.

Q:Do you have specific layout provider for motors?
A:Of course, we would like to design and style motors separately for our customers, but it may possibly require some mould cost and design demand. 

Q:Can I have samples for tests initial?
A:Yes, undoubtedly you can. Following verified the needed motor specs, we will quote and provide a proforma bill for samples, after we get the payment, we will get a PASS from our account office to continue samples accordingly.

Q:How do you make sure motor good quality?
A:We have our very own inspection procedures: for incoming resources, we have signed sample and drawing to make positive competent incoming components for generation process, we have tour inspection in the procedure and closing inspection to make sure competent goods ahead of transport.

Q:What’s your lead time?
A:CZPTly talking, our regular regular item will want twenty five-30days, a bit longer for CZPT items. But we are extremely versatile on the guide time, it will relies upon on the distinct orders

Q:What is actually your payment phrase?
A:For all our new customers, we will need forty% deposite, sixty% paid out before cargo.

Q:When will you reply soon after acquired my inquiries?
A:We will reaction in 24 hrs as soon as get your inquires.

Q:How can I trust you to make certain my income is secure?
A:We are licensed by the third get together SGS and we have exported to more than eighty five international locations up to June.2017. You can verify our popularity with our current clients in your country (if our customers do not brain), or you can purchase via alibaba to get trade assurance from alibaba to make sure your money is safe.

Q:What’s the minimal purchase quantity?
A:Our least order amount is dependent on diverse motor versions, please email us to examine. Also, we usually do not accept private use motor orders. 

Q:What is your transport approach for motors?
A:For samples and deals much less than 100kg, we generally suggest specific shipping and delivery For weighty deals, we generally suggest air shipping or sea delivery. But it all relies upon on our customers’ needs.

Q:What certifications do you have?
A:We presently have CE and ROSH certifications.

Q:Can you send me your cost list?
A:Since we have hundreds of diverse products, and price varies for every distinct technical specs, we are not in a position to provide a price checklist. But we can quote inside 24 hrs as soon as acquired your inquirues to make certain you can get the value in time.

Q:Can I visit your company?
A:Yes, welcome to check out our company, but you should allow us know at minimum two weeks in progress to assist us make sure no other meetings during the working day you pay a visit to us.

Many thanks!

Make contact with Us

HangCZPT Leison Motor Co.,Ltd
Contact Man or woman: Celia Chen
 
 Any e-mail or trademanager inquires will be replied inside of 24 hours.

Regular samples can be offer quite quickly(in ten times)

CZPTized service for sort of motor accoring to your prerequisite

Skilled Tchnical help and Soon after-sale service

CZPT motor parts like gears, encoders, cables, connectors and so on