China NEMA23 JMC Stepper Motor kit Diameter=8 428Oz-in 3.0N.m Closed loop stepper motor manufacturer

Warranty: 3months-1year
Product Amount: 57J1880EC+2HSS57
Phase: 2
Variety: Hybrid
Present / Phase: 5A
Motor Holding Torque: 3.0N.m
Motor Shaft Diameter: 8mm
Motor Guide Wire: four
Motor Inductance: 1.74mH
Motor Resistence: .45A
Driver Voltage: DC 24-50v
Packaging Details: Carton

1 pcs & Nema23 3.0Nm Shut Loop Stepper Motor 60J1887EC-10001 pcs & Motor Driver 2HSS571 pcs & 3 meter Encoder Cables Series Design: 60J1887EC-1000Step Angle: 1.8°Motor Duration: 86mmShaft Diameter: 8mmShaft Length: 21mmCurrent / Section: 5AResistance / Period: .45ΩInductance / Period: 2.1mHHolding Torque: 3N.mPositioning Torque: 690g.cmRotor Inertia: 690g.cm2Lead Wire: 4 MotorWeight: 1.4KG 1.With out dropping stage,large accuracy in positioning2.a hundred% rated output torque3.Tiny vibration,Sleek and reputable relocating at lower speed4.Compatible with 1000 traces encoder5.In excess of current,more than voltage and in excess of position mistake protection

Input Voltage24~50VDC (36V Typical)
Output Existing4.5A 20KHz PWM
Pulse Frequency max200k
Communication charge57.6Kbps
Protection1. In excess of existing CZPT price 8A±10%2.Over voltage price 80vthree.The in excess of position error assortment can be set by way of the HISU
Overall Proportions (mm)117*75*22
WeightApproximate 300g
Environment SpecificationsEnvironmentAvoid dust, oil fog and corrosive gases
Operating Temperature70℃ Max
Storage Temperature-20℃ ~ +65℃
Cooling techniqueNatural cooling or pressured air cooling
Remark:R=, if VCC=5VR=1K ( Electrical power > .125W ), if VCC=12V Faradyi Factory Price tag Wholesale Drinking water-resistant Brushless BLDC Tubular Motor For H2o Surfboard Jet Ski R=2K ( Electrical power > .125W ), if VCC=24VR1(3~5K) should be related to control sign terminal. Two period hybrid stepper servo drive method integrated servo handle technological innovation into the digital phase driver. It adopts standard tricyclic management approach which contain current loop,speed loop and situation loop.This merchandise has the edge of equally step and servo system, is a highly price-efficient motion control goods.Characteristic1. Entire shut loop control, motor encoder with a thousand line, close to a hundred% of the torque output.2. Segment set variety is 2-256, rapidly response, higher pace, gentle isolation fault alarm output interface ALM.3. Present loop bandwidth (-3 db) 2 KHZ (typical), speed loop bandwidth 500 hz (common), the situation loop bandwidth 200 hz (typical).4. RS232 serial port communication offered to obtain or adjust parameters Over-current, above-voltage, 220V 2.6KW AC servos motor 10N.M. 2500RPM servomotor Solitary-Phase push cnc servos for milling device undervoltage, overheating, rushing, differential protection Alarm very clear input ENA. Delivery CostOur products are marketed globally.If you require many products in the same time, make sure you speak to us in advance to confirm delivery expense.Payment:We take paypal credit rating, financial institution transfer, western union and so on. Payment have to be created inside 7days calendar days of the auction finish time.Issue and Suggestions:You should Will not depart any adverse suggestions ahead of you contact us.We are CZPT and beneficial supplier , we will attempt our best to fix issues with you.Your satisfaction is extremely critical for our store, so remember to speak to us before you want to depart a unfavorable feedback. Thanks extremely a lot in advance.Refund:If you are NOT Pleased with our package deal like the merchandise is hurt, you should do not sign it and make contact with us instantly.If it is feasible, you should get some images or make a small video clip about it. It will help us to fix the troubles.Note:We can produce the item according to our customer’s design. If you want some thing is extremely unique, you should speak to us about it.We are prepared to help you about it.

How to Maximize Gear Motor Reliability

A gearmotor is a mechanical device used to transmit torque from one location to another. As its name implies, it is designed to rotate one object relative to another. Its main use is to transmit torque from one point to another. The most common types of gear motors are: worm, spur, and helical. Each of these has specific functions and can be used for a variety of applications. Reliability is also an important factor to consider when choosing a gearmotor.

Applications of a gear motor

Despite its small size, a gear motor has many applications. These include heavy machinery lifts, hospital beds, and power recliners. It is also found in many everyday products, such as electromechanical clocks and cake mixers. Its versatility allows it to produce a high force from a small electric motor. Here are some of its most common uses. You can also find a gear motor in many household appliances and vehicles.
Before selecting a gearmotor, consider the specifications of the machine you need to power. You should consider its size, weight, and ambient conditions, which include temperature regimes, noise levels, and contaminating sources. You should also take into account the envelope size, mounting method, and orientation. Other considerations include the expected service life, maintenance scope, and control type. The most suitable gearmotor for your specific application will be one that can handle the load.
The motor and gearbox types can be mixed and matched, depending on the application. A three-phase asynchronous motor and a permanent magnet synchronous servomotor are common choices for these devices. The type of motor and gearbox combination you choose will determine the power supply, the efficiency of the motor, and cost. Once you understand the application, it will be easy to integrate a gear motor into your system.
When used in industrial applications, gear motors are effective for reducing the speed of rotating shafts. One third of all industrial electric motor systems use gearing to reduce output speed. They can also save energy, which benefits the workers who operate them. In fact, industrial electric motor systems are responsible for nearly one-tenth of the carbon dioxide emissions that are produced by fossil-fueled power plants. Fortunately, efficiency and reliability are just two of the benefits of using gear motors.


Before choosing a gearmotor, it is important to understand its specifications. The key factors to consider are the size, weight, and noise level of the gearmotor. Additionally, the power, torque, and speed of the motor are important factors. Specifications are also important for its operating environment, such as the temperature and the level of ingress protection. Finally, it is important to determine its duty cycle to ensure it will operate properly. To choose a suitable gearmotor, consult the specifications of your application.
Some common applications of gearmotors include packaging equipment, conveyors, and material handling applications. They also come with several advantages, including their ability to control both position and speed. This makes them ideal for applications where speed and positioning are crucial. Parallel-shaft gear units, for instance, are commonly used in conveyors, material handling, and steel mills. They are also able to operate in high-precision manufacturing. For these reasons, they are the most popular type of gearmotor.
There are three common types of gears. Helical gears have teeth that are inclined at 90 degrees to the axis of rotation, making them more efficient. Helicoidal gears, meanwhile, have a lower noise level and are therefore preferred for applications requiring high torque. Worm gears are preferred for applications where torque and speed reduction are important, and worm gears are suited for those conditions. They also have advantages over spur gears and worm gears.
The application of a gear motor is almost limitless. From heavy machine lifts to hospital bed lifting mechanisms, gear motors make it possible to use a small rotor at a high speed. Their lightweight construction also allows them to move heavy loads, such as cranes, but they do so slowly. Gear motors are an excellent choice in applications where space is an issue. A few common applications are discussed below. When choosing a gear motor, remember to choose the best size and application for your needs.


A gearmotor’s speed is directly proportional to the gear ratio. By dividing the input speed by the gear ratio, the output speed can be determined. Gear ratios above one reduce speed, while gear ratios below one increase speed. Efficiency of a gearmotor is defined as its ability to transfer energy through its gearbox. This efficiency factor takes into account losses from friction and slippage. Most gearmotor manufacturers will provide this curve upon request.
There are several factors that must be considered when choosing a gearmotor. First, the application must meet the desired speed and torque. Second, the output shaft must rotate in the desired direction. Third, the load must be properly matched to the gearmotor. Lastly, the operating environment must be considered, including the ambient temperature and the level of protection. These details will help you find the perfect gearmotor. You can compare various types of gear motors on this page and choose the one that will meet your needs.
The micro-DC gear motor is one of the most versatile types of geared motors. These motors are widely used in intelligent automobiles, robotics, logistics, and the smart city. Other applications include precision instruments, personal care tools, and cameras. They are also commonly found in high-end automotives and are used in smart cities. They also find use in many fields including outdoor adventure equipment, photography equipment, and electronics. The benefits of micro-DC gear motors are many.
The main function of a gear motor is to reduce the speed of a rotating shaft. Small electric clocks, for example, use a synchronous motor with a 1,200-rpm output speed to drive the hour, minute, and second hands. While the motor is small, the force it exerts is enormous, so it’s crucial to ensure that the motor isn’t over-powered. There is a high ratio between the input torque and the output torque.


The reliability of a gear motor is dependent on a number of factors, including material quality, machining accuracy, and operating conditions. Gear failure is often more serious than surface fatigue, and can compromise personal safety. Reliability is also affected by the conditions of installation, assembly, and usage. The following sections provide an overview of some important factors that impact gear motor reliability. This article provides some tips to maximize gear motor reliability.
First and foremost, make sure you’re buying from a reliable supplier. Gear motors are expensive, and there is no standardization of the sizes. If a gear breaks, replacing it can take a lot of time. In the long run, reliability wins over anything. But this doesn’t mean that you can ignore the importance of gears – the quality of a gear motor is more important than how long it lasts.


The cost of a gear motor is relatively low compared to that of other forms of electric motors. This type of motor is commonly used in money counters, printers, smart homes, and automation equipment. A DC gear motor is also commonly used in automatic window machines, glass curtain walls, and banknote vending machines. There are many advantages to using a gear motor. Here are a few of them. Read on to learn more about them.
Speed management is another benefit of a gear motor. The motors tend to have less wear and tear than other motors, which means less frequent replacements. Additionally, many gear motors are easy to install and require less maintenance, which also helps reduce the overall cost of ownership. Lastly, because noise is a common concern for many electronic OEMs, DC gear motors are often quieter than their counterparts. For these reasons, they are often used in industrial settings.
Another advantage of an electric gear motor is its size and power. They are typically designed for 12V, 24V, and 48V voltages and 200-watt power. Their rated speed is 3000 rpm and their torque is 0.64 Nm. They are also more reliable than their AC counterparts and are ideal for many industrial applications. They have a high ratio of three to two, which makes them ideal for a variety of applications.
A gear motor is an electric motor that is coupled with a gear train. It uses AC or DC power, and is often called a gear reducer. The main purpose of these gear reducers is to multiply torque, while maintaining compact size and overall efficiency. However, the efficiency of a gear motor is also affected by ambient temperature and lubricants. If the gear motor is installed in the wrong location, it may be ineffective and result in premature failure of the machine.

China NEMA23 JMC Stepper Motor kit Diameter=8 428Oz-in 3.0N.m Closed loop stepper motor     manufacturer China NEMA23 JMC Stepper Motor kit Diameter=8 428Oz-in 3.0N.m Closed loop stepper motor     manufacturer
editor by czh 2023-02-20

Leave a Reply

Your email address will not be published. Required fields are marked *