Rubber Cracker Equipment
1. Solid Iron Pedestal
two. Rollers are chilled forged iron(seventy five-80HS)
three.six-30 mesh rubber powder
4. Difficult-toothed surface Reducer
5. Ball bearing bushing be utilized 20 a long time
six. Nicely-sealed circulated h2o cooling system
7. CE, ISO, SGS
one. Rubber cracker can be divided into single grooved cracker and double grooved cracker.
The rolls are produced of chilled alloy solid iron with grooved teeth with hardness 510 ~ 550 BHN. The Rolls are mirror concluded & polished, duly grinded and are hollowed for cooling.
two. The protecting system is provided to defend the major elements from damage thanks to overload,
The reverse recent plugging method is supplied above the rolls. In situation of unexpected emergency, the basic safety rod is pulled down and the rolls will stopped immediately.
three. Roll hole can be altered conveniently by turning the handwheel, nip adjustment at two roller finishes is completed manually employing two different screws connected to the bearing housing entire body. The bedplate of the machine is integral or divided, so the installation is hassle-free.
Roll Clearance Altering Unit: NIP adjustment at two roller ends is done manually using two separate screws hooked up to the bearing housing body.
Journal CZPT Housing: Large Duty Steel Casting Housing fitted with Anti Friction Roller CZPTs.
Lubrication: Guide / motorized grease lubrication pump for anti friction roller bearings fitted in dust sealed housing.
Stand Body & Apron (Cap): Large Obligation Metal Casting / Metal Fabricated.
Base Body: Frequent base frame, weighty responsibility Metal fabricated of CZPT Channel and MS plate accurately machined for fitment of auxiliary gear.
Gearbox: CZPTcal Reduction Gearbox Greaves/ Shanti make immediate coupled with Motor and Pinion Drive Shaft.
CZPT Control Panel: CZPT Delta CZPT running panel with Voltmeter, Ampere meter Overload defense relay, three Period Indicator and Crisis Quit Swap.
|Major complex parameters|
|Functioning diameter of rear roller(mm)||400||450||560|
|Functioning diameter of rear roller(mm)||400||450||510|
|Functioning duration of rollers (mm)||600||760||800|
|Area velocity of front roller(m/min)||twenty||23.two||25.56|
|Velocity ratio of rollers||1:one.38||one:one.38||one:1.30|
|Optimum gap between rollers(mm)||eight||8||eight|
|Ability(kg/h)||180-300||250-four hundred||350-five hundred|
|Dimension(mm)||3950 x 1800 x 1780||4770 x 1846 x 1835||5064 x 2284 x 1978|