Tag Archives: planetary dc motor

China High Quality DC Gear Motor 3V 6V Planetary Geared DC Motor motor driver

Product Description

Solution Description
1. This motor use Pure Copper Wire, Not Aluminium Wire, So the motor is far more reputable and lengthy life span.
2. This motor use ball bearing, far more stable and safer when motor operating.
3. Voltage :1.5V-36V
4.Rated Speed :1000rpm-30000rpm
five.Common Application:Message equipments, digital toys, house programs, digital lock, digital camera, automatic merchandise
6. Insulation Course: A B F H

Goods code	voltage		NO load		at highest				stall
	functioning selection	nomal	velocity(RPM)	Present(A)	speed(RPM)	Present(A)	torque(greatupmotor)	output(w)	torque(greatupmotor)	Present(A)
S540CG-7522	three-7.5V	6V	17500	one.eight	14510	9.7	246	37	1442	48.five
S540CG-5639	six-15V	12V	19150	.ninety five	16300	5.four	265	44	1774	31
S540AG-16380	12-24V	7.5V	12000	.05	9200	.fifteen	60	.6	240	.five
S545AG-18150	twelve-24V	24V	5550	.fifteen	4450	.55	168	seven.7	840	2.17
S545AG-2775	three-12V	12V	5400	.21	4400	1	155	seven.05	860	four.4
S545AG-5622		12V	20500	one.one	17100	five.five	242	42.five	1464	28

ABOUT US

Greatupmotor group was set up in 2006.we constantly emphasis on micro-motors for house electrical equipment and industry appliance since setting up.at the moment we have 2 skilled micro-motor factories in China which severally situated in HangZhou city and HangZhou metropolis.it has an region of 25,000 square meters vegetation and more than three hundred personnel, annual output is 3 million pcs and has 5 million pcs annual producing potential.right after a number of several years improvement,we had created a excellent status in the industry and acquired far more and much more customers’ trust in the planet.
We started from shaded pole motors at beginning, up to now,our item included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our merchandise are commonly used for producing fridges, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, therapeutic massage devices and many other equipments.
As a realiable good quality guaranty,Ritscher has complete R&D departement,QC section,creating office,obtain office and many others. has best creating equipment like Aluminum diecasting, Zinc diecasting, Sheet metallic stamping, Plastic injection molding and so on. also test/ detection gadget like multiplex temp measuring gadget, overall performance parameter inspection gadget, Phenol peptide answer pinhole tester,Anechoic place and so forth.

Endeavoring to offer the greatest product and services to consumers,we usually do the most work to turn into an excellent manufacturer of micro motors.
Greatupmotor is often inclined to create honest enterprise connection with friends from all over the planet.
Welcome get in touch with with us!

Just take Greatupmotor ,appreciate present day lifestyle!

Our organization FAQ for you

(1) Q: What variety motors you can give?
A:For now,we primarily give Kitchen area Hood Motor,DC Motor,Equipment Motor,Admirer Motor Fridge Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.

(2) Q: Is it achievable to visit your factory
A: Certain. But remember to kindly hold us posted a couple of times in progress. We need to have to check our
plan to see if we are offered then.

(3) Q: Can I get some samples
A: It depends. If only a few samples for private use or alternative, I am frightened it will
be challenging for us to offer, due to the fact all of our motors are custom manufactured and no inventory
offered if there is no even more demands. If just sample tests before the official buy and
our MOQ, price tag and other terms are satisfactory, we’d enjoy to supply samples.

(4) Q: Is there a MOQ for your motors?
A: Indeed. The MOQ is in between 1000~10,000pcs for various types following sample acceptance.
But it truly is also alright for us to accept smaller lots like a couple of dozens, hundreds or countless numbers
For the preliminary 3 orders soon after sample acceptance.For samples, there is no MOQ requirement. But the less the much better (like no far more than 5pcs) on condition that the amount is enough in circumstance any changes necessary soon after preliminary screening.

/ Piece
| 100 Pieces

(Min. Order)

###

Application:	Automation Equipment, Audio and Video Equipment, Moving Machinery
Operating Speed:	Adjust Speed
Power Source:	DC Motor
Function:	Control, Driving
Casing Protection:	Protection Type
Number of Poles:	2

###

Samples:	US$ 1/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \|

###

Products code	voltage		NO load		at maximum				stall
	operating range	nomal	speed(RPM)	Current(A)	speed(RPM)	Current(A)	torque(greatupmotor.en.made-in-china.com)	output(w)	torque(greatupmotor.en.made-in-china.com)	Current(A)
S540CG-7522	3-7.5V	6V	17500	1.8	14510	9.7	246	37	1442	48.5
S540CG-5639	6-15V	12V	19150	0.95	16300	5.4	265	44	1774	31
S540AG-16380	12-24V	7.5V	12000	0.05	9200	0.15	60	0.6	240	0.5
S545AG-18150	12-24V	24V	5550	0.15	4450	0.55	168	7.7	840	2.17
S545AG-2775	3-12V	12V	5400	0.21	4400	1	155	7.05	860	4.4
S545AG-5622		12V	20500	1.1	17100	5.5	242	42.5	1464	28

/ Piece
| 100 Pieces

(Min. Order)

###

Application:	Automation Equipment, Audio and Video Equipment, Moving Machinery
Operating Speed:	Adjust Speed
Power Source:	DC Motor
Function:	Control, Driving
Casing Protection:	Protection Type
Number of Poles:	2

###

Samples:	US$ 1/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \|

###

Products code	voltage		NO load		at maximum				stall
	operating range	nomal	speed(RPM)	Current(A)	speed(RPM)	Current(A)	torque(greatupmotor.en.made-in-china.com)	output(w)	torque(greatupmotor.en.made-in-china.com)	Current(A)
S540CG-7522	3-7.5V	6V	17500	1.8	14510	9.7	246	37	1442	48.5
S540CG-5639	6-15V	12V	19150	0.95	16300	5.4	265	44	1774	31
S540AG-16380	12-24V	7.5V	12000	0.05	9200	0.15	60	0.6	240	0.5
S545AG-18150	12-24V	24V	5550	0.15	4450	0.55	168	7.7	840	2.17
S545AG-2775	3-12V	12V	5400	0.21	4400	1	155	7.05	860	4.4
S545AG-5622		12V	20500	1.1	17100	5.5	242	42.5	1464	28

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Motor

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China High Quality DC Gear Motor 3V 6V Planetary Geared DC Motor motor driver
editor by CX 2023-03-27

China High Torque Round Flange Electric Brushless DC Planetary Gear Outboard Boat Motor for Pump/Medical Equipment motorbase

Leave a reply

Solution Description

12ZYJ DC Gear Motor
Basic Details
Item			Data
Tem Rise			40K
Working Tem			(-20ºC~+80ºC)
Insulation Resistance			100MΩ min 500VDC
Surge Test			500VAC for 1min
Insulation Course			E
Weight			15g

The specifiction of 12mm N20 micro metallic dc equipment motor for robot

Technical Parameters
PN	Rated Voltage	Original Speed	Ratio	Electrical power	Noload Speed	Noload Current	Rated Speed	Rated Present	Rated Torque	Stall Torque	Stall Recent
PN	V DC	rpm	one:xxx	W	rpm	mA	rpm	mA	Kg.cm	Kg.cm	mA
12ZYJ-25A	three	7500	298	1	twenty five	50	twenty	a hundred and fifty	.6	two	500
12ZYJ-150A	6	15000	100	1	150	50	120	a hundred and fifty	.3	one.five	five hundred
12ZYJ-80A	six	20000	250	1	eighty	sixty	70	a hundred and sixty	.5	2	600

The drawing of 12mm N20 micro steel dc gear motor for robot

Beneath are only some normal models, for a lot more specification or a customed motor, pls contact us.

About our organization
Probond motors designs brush, brushless, stepper, hysteresis and linear motors to meet buyers requirements.

Our motors use regular and specific components with customer picked torque/velocity demands that can be modified to your apps.

Probond motor owns specialist product sales crew and engineer staff with a lot more than ten several years experience in motor business, based on China mainland dealing with abroad organization for a long time, we know your requirements much better than other individuals.

Probond Sonicare Toothbrush Motor and Thermostatic Valve Hysteresis Motor are our scorching goods on market in 2017 with extremely good quality level and aggressive cost.

Terms of Trade

Terms of price	FOB,CIF,CFR,EXW,DDP,and so on.
Terms of payment	a hundred% T/T in advance for samples
Terms of payment	Bulk quantity payment way can be negotited
Guarantee	12 months limited warranty once the items are delivered to the buyer.
Lead time	Usually within 2 weeks for trial orders, within 3 weeks for bulk orders.
Bundle	Carton o plywood pallet.
Place of loading	ZheJiang , HangZhou, etc.
Shipment carrier	Items are usually shipped via Fedex,DHL, TNT,UPS,EMS for trial orders and via vessel for bulk orders.
Delivery time	Usually within 5 working days by Express fifteen-30 working days by vessel

Our guarantee to our Customers:
one. Response customer’s inquiry inside of 2 operating times.
2. Reply to our buyer queries & Considerations inside of 3 doing work times.
3. Admit Client buy orders inside 24 hrs.

Application:	Universal, Industrial, Household Appliances, Car, Power Tools, Robot
Operating Speed:	High Speed
Excitation Mode:	Excited
Function:	Control, Driving
Casing Protection:	Open Type
Number of Poles:	6

###

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \|

###

12ZYJ DC Gear Motor
Basic Info
Item			Data
Tem Rise			40K
Working Tem			(-20ºC~+80ºC)
Insulation Resistance			100MΩ min 500VDC
Surge Test			500VAC for 1min
Insulation Class			E
Weight			15g

###

Technical Parameters
PN	Rated Voltage	Initial Speed	Ratio	Power	Noload Speed	Noload Current	Rated Speed	Rated Current	Rated Torque	Stall Torque	Stall Current
PN	V DC	rpm	1:xxx	W	rpm	mA	rpm	mA	Kg.cm	Kg.cm	mA
12ZYJ-25A	3	7500	298	1	25	50	20	150	0.6	2	500
12ZYJ-150A	6	15000	100	1	150	50	120	150	0.3	1.5	500
12ZYJ-80A	6	20000	250	1	80	60	70	160	0.5	2	600

###

Terms of price	FOB,CIF,CFR,EXW,DDP,etc.
Terms of payment	100% T/T in advance for samples
Terms of payment	Bulk quantity payment way can be negotited
Warranty	12 months limited warranty once the items are delivered to the buyer.
Lead time	Usually within 2 weeks for trial orders, within 3 weeks for bulk orders.
Package	Carton o plywood pallet.
Place of loading	Shanghai, Ningbo, etc.
Shipment carrier	Items are usually shipped via Fedex,DHL, TNT,UPS,EMS for trial orders and via vessel for bulk orders.
Delivery time	Usually within 5 working days by Express 15-30 working days by vessel

Application:	Universal, Industrial, Household Appliances, Car, Power Tools, Robot
Operating Speed:	High Speed
Excitation Mode:	Excited
Function:	Control, Driving
Casing Protection:	Open Type
Number of Poles:	6

###

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \|

###

12ZYJ DC Gear Motor
Basic Info
Item			Data
Tem Rise			40K
Working Tem			(-20ºC~+80ºC)
Insulation Resistance			100MΩ min 500VDC
Surge Test			500VAC for 1min
Insulation Class			E
Weight			15g

###

Technical Parameters
PN	Rated Voltage	Initial Speed	Ratio	Power	Noload Speed	Noload Current	Rated Speed	Rated Current	Rated Torque	Stall Torque	Stall Current
PN	V DC	rpm	1:xxx	W	rpm	mA	rpm	mA	Kg.cm	Kg.cm	mA
12ZYJ-25A	3	7500	298	1	25	50	20	150	0.6	2	500
12ZYJ-150A	6	15000	100	1	150	50	120	150	0.3	1.5	500
12ZYJ-80A	6	20000	250	1	80	60	70	160	0.5	2	600

###

Terms of price	FOB,CIF,CFR,EXW,DDP,etc.
Terms of payment	100% T/T in advance for samples
Terms of payment	Bulk quantity payment way can be negotited
Warranty	12 months limited warranty once the items are delivered to the buyer.
Lead time	Usually within 2 weeks for trial orders, within 3 weeks for bulk orders.
Package	Carton o plywood pallet.
Place of loading	Shanghai, Ningbo, etc.
Shipment carrier	Items are usually shipped via Fedex,DHL, TNT,UPS,EMS for trial orders and via vessel for bulk orders.
Delivery time	Usually within 5 working days by Express 15-30 working days by vessel

The Basics of a Gear Motor

The basic mechanism behind the gear motor is the principle of conservation of angular momentum. The smaller the gear, the more RPM it covers and the larger the gear, the more torque it produces. The ratio of angular velocity of two gears is called the gear ratio. Moreover, the same principle applies to multiple gears. This means that the direction of rotation of each adjacent gear is always the opposite of the one it is attached to.
Motor

Induction worm gear motor

If you’re looking for an electric motor that can deliver high torque, an Induction worm gear motor might be the right choice. This type of motor utilizes a worm gear attached to the motor to rotate a main gear. Because this type of motor is more efficient than other types of motors, it can be used in applications requiring massive reduction ratios, as it is able to provide more torque at a lower speed.
The worm gear motor is designed with a spiral shaft that is set into splines in another gear. The speed at which the worm gear rotates is dependent on the torque produced by the main gear. Induction worm gear motors are best suited for use in low-voltage applications such as electric cars, renewable energy systems, and industrial equipment. They come with a wide range of power-supply options, including twelve-volt, 24-volt, and 36-volt AC power supplies.
These types of motors can be used in many industrial settings, including elevators, airport equipment, food packaging facilities, and more. They also produce less noise than other types of motors, which makes them a popular choice for manufacturers with limited space. The efficiency of worm gearmotors makes them an excellent choice for applications where noise is an issue. Induction worm gear motors can be compact and extremely high-torque.
While the Induction worm gear motor is most widely used in industrial applications, there are other kinds of gearmotors available. Some types are more efficient than others, and some are more expensive than others. For your application, choosing the correct motor and gearbox combination is crucial to achieving the desired result. You’ll find that the Induction worm gear motor is an excellent choice for many applications. The benefits of an Induction worm gear motor can’t be overstated.
The DC gear motor is an excellent choice for high-end industrial applications. This type of gearmotor is smaller and lighter than a standard AC motor and can deliver up to 200 watts of torque. A gear ratio of three to two can be found in these motors, which makes them ideal for a wide range of applications. A high-quality DC gear motor is a great choice for many industrial applications, as they can be highly efficient and provide a high level of reliability.
Electric gear motors are a versatile and widely used type of electric motor. Nevertheless, there are some applications that don’t benefit from them, such as applications with high shaft speed and low torque. Applications such as fan motors, pump and scanning machines are examples of such high-speed and high-torque demands. The most important consideration when choosing a gearmotor is its efficiency. Choosing the right size will ensure the motor runs efficiently at peak efficiency and will last for years.
Motor

Parallel shaft helical gear motor

The FC series parallel shaft helical gearmotor is a compact, lightweight, and high-performance unit that utilizes a parallel shaft structure. Its compact design is complemented by high transmission efficiency and high carrying capacity. The motor’s material is 20CrMnTi alloy steel. The unit comes with either a flanged input or bolt-on feet for installation. Its low noise and compact design make it an ideal choice for a variety of applications.
The helical gears are usually arranged in two rows of one another. Each row contains one or more rows of teeth. The parallel row has the teeth in a helical pattern, while the helical rows are lined up parallelly. In addition to this, the cross helical gears have a point contact design and do not overlap. They can be either parallel or crossed. The helical gear motors can have any number of helical pairs, each with a different pitch circle diameter.
The benefits of the Parallel Shaft Helical Gearbox include high temperature and pressure handling. It is produced by skilled professionals using cutting-edge technology, and is widely recognized for its high performance. It is available in a range of technical specifications and is custom-made to suit individual requirements. These gearboxes are durable and low-noise and feature high reliability. You can expect to save up to 40% of your energy by using them.
The parallel shaft helical gear motors are designed to reduce the speed of a rotating part. The nodular cast iron housing helps make the unit robust in difficult environments, while the precision-machined gears provide quiet, vibration-free operation. These motors are available in double reduction, triple reduction, and quadruple reduction. The capacity ranges from 0.12 kW to 45 kW. You can choose from a wide variety of capacities, depending on the size of your gearing needs.
The SEW-EURODRIVE parallel shaft helical gearmotor is a convenient solution for space-constrained applications. The machine’s modular design allows for easy mounting and a wide range of ambient temperatures. They are ideal for a variety of mechanical applications, including conveyors, augers, and more. If you want a small footprint, the SEW-EURODRIVE parallel shaft helical gear motor is the best solution for you.
The parallel shaft helical gears are advantageous for both high and low speed applications. Parallel helical gears are also suitable for low speed and low duty applications. A good example of a cross-helix gear is the oil pump of an internal combustion engine. Both types of helical gears are highly reliable and offer vibration-free operation. They are more costly than conventional gear motors, but offer more durability and efficiency.
Motor

Helical gear unit

This helical gear unit is designed to operate under a variety of demanding conditions and can be used in a wide range of applications. Designed for long life and high torque density, this gear unit is available in a variety of torques and gear ratios. Its design and construction make it compatible with a wide range of critical mechanical systems. Common applications include conveyors, material handling, steel mills, and paper mills.
Designed for high-performance applications, the Heidrive helical gear unit provides superior performance and value. Its innovative design allows it to function well under a wide range of operating conditions and is highly resistant to damage. These gear motors can be easily combined with a helical gear unit. Their combined power output is 100 Nm, and they have a high efficiency of up to 90%. For more information about the helical gear motor, contact a Heidrive representative.
A helical gear unit can be classified by its reference section in the standard plane or the turning plane. Its center gap is the same as that of a spur gear, and its number of teeth is the same. In addition to this, the helical gear has a low axial thrust, which is another important characteristic. The helical gear unit is more efficient at transferring torque than a spur gear, and it is quieter, too.
These units are designed to handle large loads. Whether you are using them for conveyors, augers, or for any other application that involves high-speed motion, a helical gear unit will deliver maximum performance. A helical gear unit from Flender can handle 400,000 tasks with a high degree of reliability. Its high efficiency and high resistance to load ensures high plant availability. These gear motors are available in a variety of sizes, from single-speed to multi-speed.
PEC geared motors benefit from decades of design experience and high quality materials. They are robust, quiet, and offer excellent performance. They are available in multiple configurations and are dimensionally interchangeable with other major brands. The gear motors are manufactured as modular kits to minimize inventory. They can be fitted with additional components, such as backstops and fans. This makes it easy to customize your gear motors and save money while reducing costs.
Another type of helical gears is the double helical gear. The double helical gear unit has two helical faces with a gap between them. They are better for enclosed gear systems as they provide greater tooth overlap and smoother performance. Compared to double helical gears, they are smaller and more flexible than the Herringbone type. So, if you’re looking for a gear motor, a helical gear unit may be perfect for you.

China High Torque Round Flange Electric Brushless DC Planetary Gear Outboard Boat Motor for Pump/Medical Equipment motorbase
editor by czh 2023-03-24

China Brushed DC Motor 12V/24V 82mm Planetary Gear Motor motor electric

Leave a reply

Solution Description

Introduction
We have equally DC equipment motor and Brushless dc gear motor, such as 5 varieties of 300 products. The watt is from 6W to 300W, voltage is from 12VDC to 220VDC. The positive aspects of our motors are continual function, large commencing and rated torque, reduced noise, substantial performance and prolonged lifestyle.

Specs
one. Dimensions of gadget: Dia 82mm
2. Rated Energy: thirty-120W
3. Voltage: twelve/24V
4. CE
five. Can be tailored

Greensky’s benefit
On the site you can uncover a selection of renewable merchandise such as ac/dc motor, ac induction motor, reversible motor, blake motor, speed motor, ac angel motor, equipment motor, planetary equipment box, worm gear box and their relevant parts.

If you have any other questions, you should really feel cost-free to speak to us.

Business Overview

Greensky Power Organization Limited is a China dependent international business who is specialized in electric motor, gearbox and controlling program creating, producing, quality managing and buying and selling.

Mission:
We are focused to produce an global electric powered motor company who can produce one particular-cease dependable goods with client-oriented support.

Historical past:
Greensky was recognized in 2571 by CZPT Cheng in Los Angeles, Usa and moved to HangZhou, China in 2011. In the previous 8 years, the staff of Greensky continues to produce the value to our esteemed consumers all in excess of the world by creating up broad and trustworthy source chain management method, successful top quality & shipping and delivery time control technique, expense performance manufacturing system and quick-react expert provider.

Location:
Xihu (West Lake) Dis. district, HangZhou, China
Xihu (West Lake) Dis. is a large-tech zone which is the centre of oversea Chinese talent business owners. Some renowned neighbours incorporate Alibaba, Netease and Geely corporation.

History:
Greensky is a subsidiary of EagleEye Money Limited who has 3 production crops and 1 income workplace with far more than 500 employees and all round two hundred million revenue.

Greensky Overseas Exhibitions

Greensky Certificates:

FAQ

one Q: What is your MOQ?
A: 1unit is ok for diverse kinds.

two Q: What about your warranty?
A: One yr.

three Q: Do you supply OEM services with client-emblem?
A: Sure, we could do OEM orders, but we primarily focus on our own model.

4 Q: How about your payment conditions ?
A: TT, western union and paypal. 100% payment in sophisticated for orders much less $5,000. 30% deposit and harmony just before supply for orders above $5,000.

5 Q: How about your packing ?
A: Carton, Plywood situation. If you need to have a lot more, we can pack all items with pallet

six Q: What information must be provided, if I get from you ?
A: Rated energy, gearbox ratio, input speed, mounting situation. Much more information, better!

7 Q: How do you produce the buy?
A: We will evaluate and choose the most suitable techniques of shipping and delivery by sea, air or convey courier.

Warmly welcome your inquiries !

Application:	Industrial, Power Tools
Operating Speed:	Constant Speed
Excitation Mode:	Excited
Function:	Driving
Casing Protection:	Closed Type
Number of Poles:	4

###

Customization:	Available \| Customized Request

Application:	Industrial, Power Tools
Operating Speed:	Constant Speed
Excitation Mode:	Excited
Function:	Driving
Casing Protection:	Closed Type
Number of Poles:	4

###

Customization:	Available \| Customized Request

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
Motor

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt

China Brushed DC Motor 12V/24V 82mm Planetary Gear Motor motor electric
editor by czh 2023-01-29

China 36V 15W 43mm Planetary Brushless DC Motor with High Quality motor efficiency

Leave a reply

Product Description

30w 36mm DC brushless Motor

Introduction

Brushless DC motor (BLDC) is made up of motor and driver, which is a kind of typical solution of mechanical and electrical and electrical integration. It is high regarded bymarket as its small volume, low noise, high efficiency, wide range of speed control and steady working state with less inaccuracy.

Specification

Model of Motor	Voltage V	Rated Power W	Rated Current A	Rated Speed RPM	Rated Torque N.m	Lenth
GSBLD43R30D12	12	thirty	3.eighty five	3000	.096	80mm
GSBLD43R30D24	24	30	1.ninety two	3000	.096	80mm
GSBLD43R20D12	12	twenty	2.fifty six	3000	.064	70mm
GSBLD43R20D24	24	twenty	1.28	3000	.064	70mm

Note:
Motor voltage, electrical power and speed will be personalized according to your request under the allowed circumstance of adoptable dimension.

Business Overview
Greensky Electricity Organization Limited is a China based mostly international company who is specialised in electrical motor, gearbox and controlling system building, manufacturing, good quality managing and buying and selling.

Mission:
We are dedicated to develop an global electric motor business who can supply 1-end reliable merchandise with buyer-oriented service.

Heritage:
Greensky was proven in 2571 by CZPT Cheng in Los Angeles, Usa and moved to HangZhou, China in 2011. In the earlier 8 several years, the staff of Greensky continues to create the value to our esteemed customers all above the globe by developing up wide and reliable supply chain management technique, efficient top quality & shipping time management system, expense efficiency manufacturing system and fast-react professional service.

Spot:
Xihu (West Lake) Dis. district, HangZhou, China
Xihu (West Lake) Dis. is a substantial-tech zone which is the heart of oversea Chinese talent business people. Some renowned neighbours include Alibaba, Netease and Geely corporation.

Background:
Greensky is a subsidiary of EagleEye Cash Minimal who has 3 manufacturing plants and 1 product sales place of work with a lot more than five hundred personnel and all round two hundred million revenue.

Greensky Overseas Exhibitions:

Greensky Certificates:

FAQ

1 Q: What’s your MOQ?
A: 1unit is ok for distinct kinds.

two Q: What about your guarantee?
A: One particular yr.

3 Q: Do you offer OEM support with buyer-brand?
A: Indeed, we could do OEM orders, but we primarily emphasis on our personal brand.

four Q: How about your payment terms ?
A: TT, western union and paypal. a hundred% payment in sophisticated for orders considerably less $5,000. thirty% deposit and harmony ahead of supply for orders in excess of $5,000.

5 Q: How about your packing ?
A: Carton, Plywood situation. If you require more, we can pack all products with pallet

six Q: What information need to be offered, if I acquire from you ?
A: Rated electrical power, gearbox ratio, input speed, mounting position. More information, greater!

7 Q: How do you deliver the buy?
A: We will evaluate and select the most suitable ways of shipping by sea, air or convey courier.

Warmly welcome your inquiries !

Application:	Universal, Industrial, Household Appliances, Power Tools, Medical Equipment
Operating Speed:	Constant Speed
Excitation Mode:	Excited
Function:	Control
Casing Protection:	Protection Type
Number of Poles:	4

###

Samples:	US$ 30/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model of Motor	Voltage V	Rated Power W	Rated Current A	Rated Speed RPM	Rated Torque N.m	Lenth
GSBLD43R30D12	12	30	3.85	3000	0.096	80mm
GSBLD43R30D24	24	30	1.92	3000	0.096	80mm
GSBLD43R20D12	12	20	2.56	3000	0.064	70mm
GSBLD43R20D24	24	20	1.28	3000	0.064	70mm

Application:	Universal, Industrial, Household Appliances, Power Tools, Medical Equipment
Operating Speed:	Constant Speed
Excitation Mode:	Excited
Function:	Control
Casing Protection:	Protection Type
Number of Poles:	4

###

Samples:	US$ 30/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model of Motor	Voltage V	Rated Power W	Rated Current A	Rated Speed RPM	Rated Torque N.m	Lenth
GSBLD43R30D12	12	30	3.85	3000	0.096	80mm
GSBLD43R30D24	24	30	1.92	3000	0.096	80mm
GSBLD43R20D12	12	20	2.56	3000	0.064	70mm
GSBLD43R20D24	24	20	1.28	3000	0.064	70mm

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China 36V 15W 43mm Planetary Brushless DC Motor with High Quality motor efficiency
editor by czh 2023-01-26

China Low Speed 7rpm Gear Motor with Micro Planetary Gear 12 Volt 24 Volt DC for Electric Blinds brushless motor

Leave a reply

Solution Description

low noise 16mm dc geared motor with planetary gearbox for electric powered blinds

1. Functions of PG16M050
Voltage: 3V 6V 12V 24V
Present: .28-1.25A
Velocity: 2-3000rpm
Normal purposes: Optical equipment, monitoring cameras, sort of finger-electric powered locks, automated vitality saving bathtub, drinking water IC card, toys and presents, office equipment, family appliances, automated actuator

two. Specs of PG16M050

Notice: It really is the normal specificaitoin for reference only, We can decide on DC motor with various voltage pace to meet up with your torque and speed need.

Company Profile

one. About us

1) DC Brush motor: 6-130mm diameter, .01-1000W output electrical power
2) DC Spur Equipment Motor: 12-110mm diameter, .1-300W output energy
3) DC Planeary Gear Motor: ten-82mm diameter, .1-100W output power
4) Brushless DC Motor: 28-110mm, 5-1500W output power
5) Stepper Motor: NEMA 08 to NEMA 43, Can with gearbox and direct screw
six) Servo Motor: 42mm to 130mm diameter, 50-4000w
seven) AC Gear Motor: 49 to 100mm diameter, 6-one hundred forty output power

2. Generation line

Packing&Shipping

Certifications

Client Visits

FAQ
Q: What is your main goods?
A:We currently create Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors and so forth. You can verify the specifications for above motors on our site and you can electronic mail us to suggest required motors per your specification too.

Q:How to pick a suitable motor?
A:If you have motor images or drawings to demonstrate us, or you have thorough specs like voltage, pace, torque, motor dimension, operating method of the motor, necessary daily life time and sounds degree and so on, you should do not hesitate to permit us know, then we can advise appropriate motor per your request appropriately.

Q: Do you have custom-made provider for your normal motors?
A:Of course, we can customise per your request for the voltage, velocity, torque and shaft dimensions/shape. If you require further wires/cables soldered on the terminal or need to include connectors, or capacitors or EMC we can make it too.

Q: you have individual design and style services for motors?
A:Indeed, we would like to style motors separately for our customers, but it could want some CZPT cost and style demand.

Q:Can I have samples for screening initial?
A:Indeed, undoubtedly you can. After verified the needed motor specs, we will quotation and offer a proforma invoice for samples, when we get the payment, we will get a Go from our account section to continue samples accordingly.

Q:How do you make confident motor top quality?
A:We have our possess inspection techniques: for incoming components, we have signed sample and drawing to make certain certified incoming components for generation method, we have tour inspection in the procedure and closing inspection to make confident experienced products ahead of transport.

Q:What’s your lead time?
A:Normally speaking, our standard normal item will require 25-30days, a little bit more time for tailored merchandise. But we are very flexible on the direct time, it will depends on the certain orders

Q:What is your payment term?
A:For all our new buyers, we will require 40% deposite, 60% paid out ahead of cargo.

Q:When will you reply soon after got my inquiries?
A:We will response within 24 several hours once get your inquires.

Q:How can I trust you to make positive my money is secure?
A:We are licensed by the 3rd celebration SGS and we have exported to above 85 international locations up to June.2017. You can check out our status with our recent consumers in your nation (if our clients do not head), or you can purchase through alibaba to get trade assurance from alibaba to make certain your funds is safe.

Q:What is actually the minimal order quantity?
A:Our bare minimum order quantity depends on various motor versions, you should e mail us to examine. Also, we generally do not take personal use motor orders.

Q:What is actually your shipping and delivery approach for motors?
A:For samples and packages much less than 100kg, we normally propose specific delivery For hefty offers, we usually suggest air transport or sea shipping. But it all is dependent on our customers’ needs.

Q:What certifications do you have?
A:We at present have CE and ROSH certifications.

Q:Can you send out me your price checklist?
A:Considering that we have hundreds of distinct goods, and price tag varies for each various specs, we are not CZPT to offer a cost checklist. But we can estimate inside 24 hours when got your inquirues to make certain you can get the price in time.

Q:Can I check out your company?
A:Indeed, welcome to go to our organization, but please enable us know at the very least 2 weeks in advance to support us make positive no other conferences during the working day you go to us. Thanks!

Application:	Household Appliances, Finger-Electronic Locks, Toys and Gifts
Operating Speed:	Low Speed
Function:	Driving
Casing Protection:	Drip-Proof
Structure and Working Principle:	Brush
Certification:	Ce, RoHS

###

Samples:	US$ 15/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

Application:	Household Appliances, Finger-Electronic Locks, Toys and Gifts
Operating Speed:	Low Speed
Function:	Driving
Casing Protection:	Drip-Proof
Structure and Working Principle:	Brush
Certification:	Ce, RoHS

###

Samples:	US$ 15/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

Benefits of a Planetary Motor

A planetary motor has many benefits. Its compact design and low noise makes it a good choice for any application. Among its many uses, planetary gear motors are found in smart cars, consumer electronics, intelligent robots, communication equipment, and medical technology. They can even be found in smart homes! Read on to discover the benefits of a planetary gear motor. You’ll be amazed at how versatile and useful it is!
Motor

Self-centering planet gears ensure a symmetrical force distribution

A planetary motor is a machine with multiple, interlocking planetary gears. The output torque is inversely proportional to the diameters of the planets, and the transmission size has no bearing on the output torque. A torsional stress analysis of the retaining structure for this type of motor found a maximum shear stress of 64 MPa, which is equivalent to a safety factor of 3.1 for 6061 aluminum. Self-centering planet gears are designed to ensure a symmetrical force distribution throughout the transmission system, with the weakest component being the pinions.
A planetary gearbox consists of ring and sun gears. The pitch diameters of ring and planet gears are nearly equal. The number of teeth on these gears determines the average gear-ratio per output revolution. This error is related to the manufacturing precision of the gears. The effect of this error is a noise or vibration characteristic of the planetary gearbox.
Another design for a planetary gearbox is a traction-based variant. This design eliminates the need for timing marks and other restrictive assembly conditions. The design of the ring gear is similar to that of a pencil sharpener mechanism. The ring gear is stationary while planet gears extend into cylindrical cutters. When placed on the sun’s axis, the pencil sharpening mechanism revolves around the ring gear to sharpen the pencil.
The JDS eliminates the need for conventional planetary carriers and is mated with the self-centering planet gears by dual-function components. The dual-function components synchronize the rolling motion and traction of the gears. They also eliminate the need for a carrier and reduce the force distribution between the rotor and stator.

Metal gears

A planetary motor is a type of electric drive that uses a series of metal gears. These gears share a load attached to the output shaft to generate torque. The planetary motor is often CNC controlled, with extra-long shafts, which allow it to fit into very compact designs. These gears are available in sizes from seven millimeters to 12 millimeters. They can also be fitted with encoders.
Planetary gearing is widely used in various industrial applications, including automobile transmissions, off-road transmissions, and wheel drive motors. They are also used in bicycles to power the shift mechanism. Another use for planetary gearing is as a powertrain between an internal combustion engine and an electric motor. They are also used in forestry applications, such as debarking equipment and sawing. They can be used in other industries as well, such as pulp washers and asphalt mixers.
Planetary gear sets are composed of three types of gears: a sun gear, planet gears, and an outer ring. The sun gear transfers torque to the planet gears, and the planet gears mesh with the outer ring gear. Planet carriers are designed to deliver high-torque output at low speeds. These gears are mounted on carriers that are moved around the ring gear. The planet gears mesh with the ring gears, and the sun gear is mounted on a moveable carrier.
Plastic planetary gear motors are less expensive to produce than their metal counterparts. However, plastic gears suffer from reduced strength, rigidity, and load capacity. Metal gears are generally easier to manufacture and have less backlash. Plastic planetary gear motor bodies are also lighter and less noisy. Some of the largest plastic planetary gear motors are made in collaboration with leading suppliers. When buying a plastic planetary gear motor, be sure to consider what materials it is made of.
Motor

Encoder

The Mega Torque Planetary Encoder DC Geared Motor is designed with a Japanese Mabuchi motor RS-775WC, a 200 RPM base motor. It is capable of achieving stall torque at low speeds, which is impossible to achieve with a simple DC motor. The planetary encoder provides five pulses per revolution, making it perfect for applications requiring precise torque or position. This motor requires an 8mm hex coupling for proper use.
This encoder has a high resolution and is suitable for ZGX38REE, ZGX45RGG and ZGX50RHH. It features a magnetic disc and poles and an optical disc to feed back signals. It can count paulses as the motor passes through a hall on the circuit board. Depending on the gearbox ratio, the encoder can provide up to two million transitions per rotation.
The planetary gear motor uses a planetary gear system to distribute torque in synchrony. This minimizes the risk of gear failure and increases the overall output capacity of the device. On the other hand, a spur gear motor is a simpler design and cheaper to produce. The spur gear motor works better for lower torque applications as each gear bears all the load. As such, the torque capacity of the spur gear motor is lower than that of a planetary gear motor.
The REV UltraPlanetary gearbox is designed for FTC and has three different output shaft options. The output shaft is made of 3/8-inch hex, allowing for flexible shaft replacement. These motors are a great value as they can be used to meet a wide range of power requirements. The REV UltraPlanetary gearbox and motor are available for very reasonable prices and a female 5mm hex output shaft can be used.

Durability

One of the most common questions when selecting a planetary motor is “How durable is it?” This is a question that’s often asked by people. The good news is that planetary motors are extremely durable and can last for a long time if properly maintained. For more information, read on! This article will cover the durability and efficiency of planetary gearmotors and how you can choose the best one for your needs.
First and foremost, planetary gear sets are made from metal materials. This increases their lifespan. The planetary gear set is typically made of metals such as nickel-steel and steel. Some planetary gear motors use plastic. Steel-cut gears are the most durable and suitable for applications that require more torque. Nickel-steel gears are less durable, but are better able to hold lubricant.
Durability of planetary motor gearbox is important for applications requiring high torque versus speed. VEX VersaPlanetary gearboxes are designed for FRC(r) use and are incredibly durable. They are expensive, but they are highly customizable. The planetary gearbox can be removed for maintenance and replacement if necessary. Parts for the gearbox can be purchased separately. VEX VersaPlanetary gearboxes also feature a pinion clamped onto the motor shaft.
Dynamic modeling of the planetary gear transmission system is important for understanding its durability. In previous studies, uncoupled and coupled meshing models were used to investigate the effect of various design parameters on the vibration characteristics of the planetary gear system. This analysis requires considering the role of the mesh stiffness, structure stiffness, and moment of inertia. Moreover, dynamic models for planetary gear transmission require modeling the influence of multiple parameters, such as mesh stiffness and shaft location.
Motor

Cost

The planetary gear motor has multiple contact points that help the rotor rotate at different speeds and torques. This design is often used in stirrers and large vats of liquid. This type of motor has a low initial cost and is more commonly found in low-torque applications. A planetary gear motor has multiple contact points and is more effective for applications requiring high torque. Gear motors are often found in stirring mechanisms and conveyor belts.
A planetary gearmotor is typically made from four mechanically linked rotors. They can be used for various applications, including automotive and laboratory automation. The plastic input stage gears reduce noise at higher speeds. Steel gears can be used for high torques and a modified lubricant is often added to reduce weight and mass moment of inertia. Its low-cost design makes it an excellent choice for robots and other applications.
There are many different types of planetary gear motors available. A planetary gear motor has three gears, the sun gear and planet gears, with each sharing equal amounts of work. They are ideal for applications requiring high torque and low-resistance operation, but they require more parts than their single-stage counterparts. The steel cut gears are the most durable, and are often used in applications that require high speeds. The nickel-steel gears are more absorptive, which makes them better for holding lubricant.
A planetary gear motor is a high-performance electrical vehicle motor. A typical planetary gear motor has a 3000 rpm speed, a peak torque of 0.32 Nm, and is available in 24V, 36V, and 48V power supply. It is also quiet and efficient, requiring little maintenance and offering greater torque to a modern electric car. If you are thinking of buying a planetary gear motor, be sure to do a bit of research before purchasing one.

China Low Speed 7rpm Gear Motor with Micro Planetary Gear 12 Volt 24 Volt DC for Electric Blinds brushless motor
editor by czh 2023-01-24

China Stable operation 48V Planetary reduction circular mini DC brushless motor for Clothing plotter supplier

Leave a reply

Merchandise Description

Planetary deceleration brushless motor has the traits of substantial precision, large rigidity, substantial load, substantial performance, high velocity ratio, higher lifestyle, lower inertia, low vibration, low noise, minimal temperature rise, lovely physical appearance, light composition, effortless set up, accurate positioning and so on.

Item Parameters

Electrical Requirements

Motor Model	sixty twoBSTE487830	sixty twoBSTE48eleventhirty	sixty twoBSTE481fivethirty	62BSTE481930	62BSTE482330
Rated Voltage(VDC)	48
Rated Pace(Rpm)	3000
Rated Torque(N.m)	.25	.37	.five	.62	.75
Rated Energy(W)	seventy eight	118	156	195	235
L1 Duration(mm)	61	71	81	ninety one	one hundred and one

Note: We can manufacture items according to customer’s specifications.

Gearbox Electrical Technical specs

Reducer Collection	1	two
Transmission performance	95%	90%
Max radial load	460N	460N
Max axial load	230N	230N
Transmission torque	25N.m	40N.m
Reduction Ratio	5,ten	fifteen,20,twenty five,30,40,fifty
L2 Size(mm)	48	64

Define drawing

Wiring diagram

Our Rewards

Solution show

Software

Organization Profile

HangZhou CZPT Motor Co., Ltd, proven in 2004, is a large-tech organization, which is engaged in the improvement, creation and promoting kinds of micro motor and movement management methods.
Making use of higher-high quality components, innovative manufacturing method and stringent quality administration our product line contains virtually all varieties of high-quality motors, these kinds of as hybrid stepper motors, near-loop stepper motors, brushless DC motors, servo motors, and so forth. Our company is 1 of the top makers in domestic and international market, and our products are at the same degree of global renowned-brand types. Our goods are widely utilized in laptop peripheral products, communications, phase lighting, textiles, packaging, printing, health care tools, sewing equipment, and other industrial automation programs.
Our company is abundant in complex experience, we use sophisticated creation procedure and tests products, and obeys advanced top quality management specifications in creation, these kinds of as ISO9001: 2008, 6 Sigma. In addition to, our company also has acquired the CE certification, and all of our merchandise are RoHS compliant.
With the spirit of “product innovation, high quality, exceptional provider”, our company will repeatedly target on micro motor sector, and give a lot more substantial-high quality goods and far more skilled service for our clients. We try our very best to earn the client’ S trust by our higher-good quality goods, excellent services and sensible prices. We are turning into the leader of the micro motor industry.

Certifications

FAQ

Payments

1) We can acknowledge EXW, FOB
two) Payment need to be produced just before shipment.
3) Import obligations, taxes and charges are not incorporated in the product price tag or shipping charges. These expenses are the buyer’s obligation.

Shipping and delivery
one) We only ship to your confirmed tackle. You should make sure your delivery tackle is proper before obtain.
2) Most orders will be shipped out within 3-7 doing work days upon payment confirmation.
three) Shipping normally requires 7-25 operating times. Most of the objects will delivery in 2 weeks, while there will be a delay for some thing we are not able to manage (these kinds of as the bad weather conditions). If it happens, just contact us, we will aid you check out and solve any difficulty.
3) Please check the bundle on receipt, if there are some damages, make sure you get in touch with us right away.
Comments & Refund
1) Feedback is essential to us, if you have any dilemma with our goods, remember to speak to us, our technician will give you helpful advises.
2) When you have the parcel and not pleased with the merchandise or it is other issue, please explain to us instantly, and give us a photo displaying the depth.
3) Any cause necessitating for all refund. Items have to be in unique situation and no actual physical harm. Purchaser liable for all delivery cost.

If you need to have far more data, make sure you get in touch with with us. We will attach great relevance to your any problems.
Hope we could establish a long-time period effective cooperation.

US $28-202
/ Piece
| 10 Pieces

(Min. Order)

###

Application:	Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed:	Constant Speed
Excitation Mode:	Compound
Function:	Driving
Casing Protection:	Protection Type
Number of Poles:	4

###

Customization:	Available \| Customized Request

###

Motor Model	62BSTE487830	62BSTE481130	62BSTE481530	62BSTE481930	62BSTE482330
Rated Voltage(VDC)	48
Rated Speed(Rpm)	3000
Rated Torque(N.m)	0.25	0.37	0.5	0.62	0.75
Rated Power(W)	78	118	156	195	235
L1 Length(mm)	61	71	81	91	101

###

Reducer Series	1	2
Transmission efficiency	95%	90%
Max radial load	460N	460N
Max axial load	230N	230N
Transmission torque	25N.m	40N.m
Reduction Ratio	5,10	15,20,25,30,40,50
L2 Length(mm)	48	64

US $28-202
/ Piece
| 10 Pieces

(Min. Order)

###

Application:	Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed:	Constant Speed
Excitation Mode:	Compound
Function:	Driving
Casing Protection:	Protection Type
Number of Poles:	4

###

Customization:	Available \| Customized Request

###

Motor Model	62BSTE487830	62BSTE481130	62BSTE481530	62BSTE481930	62BSTE482330
Rated Voltage(VDC)	48
Rated Speed(Rpm)	3000
Rated Torque(N.m)	0.25	0.37	0.5	0.62	0.75
Rated Power(W)	78	118	156	195	235
L1 Length(mm)	61	71	81	91	101

###

Reducer Series	1	2
Transmission efficiency	95%	90%
Max radial load	460N	460N
Max axial load	230N	230N
Transmission torque	25N.m	40N.m
Reduction Ratio	5,10	15,20,25,30,40,50
L2 Length(mm)	48	64

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
Motor

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
Motor

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
Motor

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China Stable operation 48V Planetary reduction circular mini DC brushless motor for Clothing plotter supplier
editor by czh 2023-01-21

China Elektromotor, DC Planetary Gear Box, 1W 1.56W 2W 3W 4W 5W 6W 7W 8W 9W 10W Electromotor, Induction Engine Electric Motor motor armature

Leave a reply

Merchandise Description

Elektromotor, DC Planetary Gear Box, 1W 1.56W 2W 3W 4W 5W 6W 7W 8W 9W 10W Electromotor, Induction Motor Electric powered Motor

Features:
1) Proportions: 22*22mm
two) Energy: 1W 1.56W
three) Voltage: 12V
four) Rated pace: 3340rpm, 5000rpm
5) Reduction ratio: 4~ 304K

Item picture:

Specification for DC gear motor:

Motor type	Brush variety / Brushless variety / Stepper variety
Frame size	16mm ~ 130mm… can be tailored
Working speed	Motor 1500-4000 rpm, Equipment Ratio 1/3 ~ 1/3000
Output power	3W ~2200W… can be tailored
Output shaft	round shaft, D-lower shaft, essential-way shaft, hollow shaft…
Voltage type	12V / 24V / 36V / 48V / 90V / 110V /220V… can be personalized
Components	Internal driver / External driver / Connector / Brake / Encoder…

Gearbox sort	Parallel shaft
	Proper angle hollow worm shaft	Appropriate angle bevel hollow shaft	Flat type hollow shaft
	Right angle reliable worm shaft	Right angle bevel reliable shaft	Flat sort strong shaft
	Planetary middle shaft

FAQ

Q: Can you make the equipment motor with customization?
A: Yes, we can customise for each your request, like electricity, voltage, velocity, shaft size, wires, connectors, IP quality, and many others.

Q: Do you offer samples?
A: Indeed. Sample is accessible for tests.

Q: What is your MOQ?
A: It is 10pcs for the commencing of our business.

Q: What’s your direct time?
A: Common item need to have 5-30days, a bit longer for personalized merchandise.

Q: Do you supply technological innovation assistance?
A: Of course. Our organization have layout and development team, we can supply technologies support if you
need.

Q: How to ship to us?
A: It is available by air, or by sea, or by practice.

Q: How to spend the funds?
A: T/T and L/C is chosen, with various forex, such as USD, EUR, RMB, and so forth.

Q: How can I know the product is ideal for me?
A: >1^ST verify drawing and specification >2^nd test sample >3^rd start mass manufacturing.

Q: Can I come to your organization to go to?
A: Sure, you are welcome to pay a visit to us at any time.

Q: How shall we speak to you?
A: You can send inquiry directly, and we will reply inside of 24 hours.

US $5-25
/ Piece
| 1 Piece

(Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated

###

Application:	Universal, Industrial, Household Appliances, Power Tools, Lawn Mower
Operating Speed:	Constant Speed
Excitation Mode:	Excited

###

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Order Sample

###

Customization:	Available \| Customized Request

###

Motor type	Brush type / Brushless type / Stepper type
Frame size	16mm ~ 130mm… can be customized
Running speed	Motor 1500-4000 rpm, Gear Ratio 1/3 ~ 1/3000
Output power	3W ~2200W… can be customized
Output shaft	round shaft, D-cut shaft, key-way shaft, hollow shaft…
Voltage type	12V / 24V / 36V / 48V / 90V / 110V /220V… can be customized
Accessories	Internal driver / External driver / Connector / Brake / Encoder…

Gearbox type	Parallel shaft
	Right angle hollow worm shaft	Right angle bevel hollow shaft	Flat type hollow shaft
	Right angle solid worm shaft	Right angle bevel solid shaft	Flat type solid shaft
	Planetary center shaft

US $5-25
/ Piece
| 1 Piece

(Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated

###

Application:	Universal, Industrial, Household Appliances, Power Tools, Lawn Mower
Operating Speed:	Constant Speed
Excitation Mode:	Excited

###

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Order Sample

###

Customization:	Available \| Customized Request

###

Motor type	Brush type / Brushless type / Stepper type
Frame size	16mm ~ 130mm… can be customized
Running speed	Motor 1500-4000 rpm, Gear Ratio 1/3 ~ 1/3000
Output power	3W ~2200W… can be customized
Output shaft	round shaft, D-cut shaft, key-way shaft, hollow shaft…
Voltage type	12V / 24V / 36V / 48V / 90V / 110V /220V… can be customized
Accessories	Internal driver / External driver / Connector / Brake / Encoder…

Gearbox type	Parallel shaft
	Right angle hollow worm shaft	Right angle bevel hollow shaft	Flat type hollow shaft
	Right angle solid worm shaft	Right angle bevel solid shaft	Flat type solid shaft
	Planetary center shaft

Benefits of a Planetary Motor

Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.
Motor

Solar gear

The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.

Sun gear

The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.
Motor

Planetary gear

A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.

Planetary gearbox

A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.
Motor

Planetary gear motor

Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.

China Elektromotor, DC Planetary Gear Box, 1W 1.56W 2W 3W 4W 5W 6W 7W 8W 9W 10W Electromotor, Induction Engine Electric Motor motor armature
editor by czh 2023-01-19

China 12V DC planetary small gear motor for Air Purifiers manufacturer

Leave a reply

Merchandise Description

12v dc planetary modest equipment motor for Air Purifiers

Principal Functions
1.24mm planetary reducer additionally 370&320 dc motor and TEC2419 brushless motor
2.Little measurement dc gear motor with minimal speed and big torque
3.24mm gear motor offer .5Nm torque and a lot more dependable
4.Suitable to little diameter, minimal noise and big torque software
five.Dc Gear motors can match encoder,11ppr
6Reduction ratio:4,fourteen,19,27,fifty one,71,100,189,264,369,516,981,1370,2671,3730

Motor product no.	Rated voltage	No-load speed	No-load current	Rated pace	Rated torque	Rated existing	Output electricity	Stall torque	Stall existing
Motor product no.	VDC	r&solmin	mA	r&solmin	g.cm	mA	W	g.cm	A
TRK-370CA-22170	6	5600	fifty	4800	24	three hundred	1.eighteen	186	two.1
TRK-370CA-15360	12	5600	twenty five	4800	24	a hundred and sixty	one.18	186	one.06
TRK-370CA-12560	12	3700	twenty	3000	twenty	90	.sixty two	one hundred twenty five	.46

Equipment motor complex information : GMP24-370CA-22170-xxx

Reduction ratio	four	19	27	51	one hundred	189	264	369	981	1370
Length mm	23	23	23	33	33	38	38	38	43	forty three
No-load speed rpm	1300	280	195	104	54	29	21	fifteen	five.7	four.1
Rated speed rpm	1200	253	178	ninety four	48	twenty five	18	13	5.one	three.8
Rated torque kg.cm	.08	.3	.5	.seven	one.4	2.5	three.five	four.4	5	5
Max.momentary tolerance torque kg.cm	.6	two.5	three.five	5.seven	eleven	fifteen	15	15	fifteen	15

Equipment motor complex data : GMP24-370CA-15360-xxx

Reduction ratio	four	19	27	51	100	189	264	369	981	1370
Length mm	23	23	23	33	33	38	38	38	forty three	43
No-load pace rpm	1300	280	195	104	54	29	21	15	5.7	4.1
Rated pace rpm	1200	253	178	94	48	25	eighteen	thirteen	five.one	three.eight
Rated torque kg.cm	.08	.three	.five	.seven	one.4	2.5	three.5	4.four	5	five
Max.momentary tolerance torque kg.cm	.6	2.5	three.five	5.seven	11	fifteen	fifteen	15	fifteen	15

Equipment motor technical data : GMP24-370CA-12560-xxx

Reduction ratio	four	19	27	fifty one	a hundred	189	264	369	981	1370
Duration mm	23	23	23	33	33	38	38	38	43	43
No-load speed rpm	870	180	130	69	35	19	13.5	10	three.eight	2.7
Rated velocity rpm	750	158	a hundred and ten	fifty nine	30	16	11.four	8	3.5	two.six
Rated torque kg.cm	.65	.three	.four	.6	1.two	2.one	two.nine	four	5	5
Max.momentary tolerance torque kg.cm	.four	1.7	two.4	three.8	seven.five	thirteen	fifteen	15	fifteen	fifteen

Item Software

Other Applications:
Organization Equipment:	ATM, Copiers and Scanners, Currency Managing, Position of Sale, Printers, Vending Machines.
Foodstuff and Beverage:	Beverage Dispensing, Hand Blenders, Blenders, Mixers, Coffee Devices, Foods Processors, Juicers, Fryers, Ice Makers, Soy Bean Milk Makers.
Residence Entertainment and Gaming:	Gaming Devices, Video clip Games, Optical Disk Drives, RC and Electrical power Toys.
Home Systems:	Residence Ventilation, Air Purifiers and Dehumidifiers, Range Hoods, Washers and Dryers, Refrigerators, Dishwashers, Flooring Care, Whirlpool and Spa, Showers, Smart Metering, Coffee Devices.
Garden and Backyard:	Lawn Mowers, Snow Blowers, Trimmers, Leaf Blowers.
Personalized Treatment:	Hair Slicing, Hair Care, Massagers.
Electrical power Instruments:	Drills and Motorists, Sanders, Grinders, Polishers, Saws.
Digital camera and Optical:	Video, Cameras, Projectors.

Packing & Supply
Packaging: single carton packing, a hundred pieces for every box.
Delivery time:
DHL: 3-5 functioning times &semi
UPS: 5-7 working times&semi
TNT: 5-7 functioning days&semi
FedEx: 7-9 operating times&semi
EMS: 12-15 functioning days&semi
China Submit: Depends on ship to which nation&semi
Sea: Depends on ship to which region

Our company
TT Motor &lparHK) Industrial Co., Ltd. has been specializing in micro motors, gear motors and their respectiveparts since 2000.
Our products are widely used in entertainment systems, automobiles, home and industrial appliances and tools and many others. Our products are dependable and long-long lasting, and backed by years of experience. We export 98&percnt of our output worldwide.
By leveraging our hard-won reputation for honesty, dependability and quality, TT aims to continue as a pioneer in the sales overseas by seeking global partners. If your company is an end-user of micro-motors, a distributor or an agent, please contact us. We look forward to being able to work together with you in the near future.

FAQ
Q: How to get&quest
A: send us inquiry &rightarrow obtain our quotation &rightarrow negotiate specifics &rightarrow confirm the sample &rightarrow sign deal&soldeposit &rightarrow mass production &rightarrow cargo completely ready &rightarrow harmony&soldelivery &rightarrow even more cooperation.
Q: How about Sample buy&quest
A: Sample is accessible for you. make sure you speak to us for specifics. After we demand you sample payment, remember to really feel easy, it would be refund when you area formal buy.
Q: Which shipping way is avaliable&quest
A: DHL, UPS, FedEx, TNT, EMS, China Post,Sea are obtainable.The other transport approaches are also accessible, you should make contact with us if you need to have ship by the other delivery way.
Q: How lengthy is the deliver&quest
A: Devliver time relies upon on the amount you order. normally it requires 15-25 functioning times.
Q: My package has missing goods. What can I do&quest
A: Remember to contact our support team and we will confirm your order with the package contents.We apologize for any inconveniences.
Q: How to affirm the payment&quest
A: We acknowledge payment by T&solT, PayPal, the other payment ways also could be acknowledged,Make sure you get in touch with us ahead of you shell out by the other payment ways. Also thirty-50&percnt deposit is offered, the balance money need to be paid before transport.

US $7.9-9.9
/ Piece
| 50 Pieces

(Min. Order)

###

Application:	Industrial, Car, Power Tools
Operating Speed:	Low Speed
Excitation Mode:	Permanent Magnet
Function:	Totally Enclosed
Casing Protection:	Protection Type
Number of Poles:	4

###

Samples:	US$ 24/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Motor model no&period;	Rated voltage	No-load speed	No-load current	Rated speed	Rated torque	Rated current	Output power	Stall torque	Stall current
Motor model no&period;	VDC	r/min	mA	r/min	g&period;cm	mA	W	g&period;cm	A
TRK-370CA-22170	6	5600	50	4800	24	300	1&period;18	186	2&period;1
TRK-370CA-15360	12	5600	25	4800	24	160	1&period;18	186	1&period;06
TRK-370CA-12560	12	3700	20	3000	20	90	0&period;62	125	0&period;46

###

Reduction ratio	4	19	27	51	100	189	264	369	981	1370
Length mm	23	23	23	33	33	38	38	38	43	43
No-load speed rpm	1300	280	195	104	54	29	21	15	5&period;7	4&period;1
Rated speed rpm	1200	253	178	94	48	25	18	13	5&period;1	3&period;8
Rated torque kg&period;cm	0&period;08	0&period;3	0&period;5	0&period;7	1&period;4	2&period;5	3&period;5	4&period;4	5	5
Max&period;momentary tolerance torque kg&period;cm	0&period;6	2&period;5	3&period;5	5&period;7	11	15	15	15	15	15

###

Reduction ratio	4	19	27	51	100	189	264	369	981	1370
Length mm	23	23	23	33	33	38	38	38	43	43
No-load speed rpm	1300	280	195	104	54	29	21	15	5&period;7	4&period;1
Rated speed rpm	1200	253	178	94	48	25	18	13	5&period;1	3&period;8
Rated torque kg&period;cm	0&period;08	0&period;3	0&period;5	0&period;7	1&period;4	2&period;5	3&period;5	4&period;4	5	5
Max&period;momentary tolerance torque kg&period;cm	0&period;6	2&period;5	3&period;5	5&period;7	11	15	15	15	15	15

###

Reduction ratio	4	19	27	51	100	189	264	369	981	1370
Length mm	23	23	23	33	33	38	38	38	43	43
No-load speed rpm	870	180	130	69	35	19	13&period;5	10	3&period;8	2&period;7
Rated speed rpm	750	158	110	59	30	16	11&period;4	8	3&period;5	2&period;6
Rated torque kg&period;cm	0&period;65	0&period;3	0&period;4	0&period;6	1&period;2	2&period;1	2&period;9	4	5	5
Max&period;momentary tolerance torque kg&period;cm	0&period;4	1&period;7	2&period;4	3&period;8	7&period;5	13	15	15	15	15

###

Other Applications&colon;
Business Machines&colon;	ATM, Copiers and Scanners, Currency Handling, Point of Sale, Printers, Vending Machines&period;
Food and Beverage&colon;	Beverage Dispensing, Hand Blenders, Blenders, Mixers, Coffee Machines, Food Processors, Juicers, Fryers, Ice Makers, Soy Bean Milk Makers&period;
Home Entertainment and Gaming&colon;	Gaming Machines, Video Games, Optical Disk Drives, RC and Power Toys&period;
Home Technologies&colon;	Home Ventilation, Air Purifiers and Dehumidifiers, Range Hoods, Washers and Dryers, Refrigerators, Dishwashers, Floor Care, Whirlpool and Spa, Showers, Smart Metering, Coffee Machines&period;
Lawn and Garden&colon;	Lawn Mowers, Snow Blowers, Trimmers, Leaf Blowers&period;
Personal Care&colon;	Hair Cutting, Hair Care, Massagers&period;
Power Tools&colon;	Drills and Drivers, Sanders, Grinders, Polishers, Saws&period;
Camera and Optical&colon;	Video, Cameras, Projectors&period;

US $7.9-9.9
/ Piece
| 50 Pieces

(Min. Order)

###

Application:	Industrial, Car, Power Tools
Operating Speed:	Low Speed
Excitation Mode:	Permanent Magnet
Function:	Totally Enclosed
Casing Protection:	Protection Type
Number of Poles:	4

###

Samples:	US$ 24/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Motor model no&period;	Rated voltage	No-load speed	No-load current	Rated speed	Rated torque	Rated current	Output power	Stall torque	Stall current
Motor model no&period;	VDC	r/min	mA	r/min	g&period;cm	mA	W	g&period;cm	A
TRK-370CA-22170	6	5600	50	4800	24	300	1&period;18	186	2&period;1
TRK-370CA-15360	12	5600	25	4800	24	160	1&period;18	186	1&period;06
TRK-370CA-12560	12	3700	20	3000	20	90	0&period;62	125	0&period;46

###

Reduction ratio	4	19	27	51	100	189	264	369	981	1370
Length mm	23	23	23	33	33	38	38	38	43	43
No-load speed rpm	1300	280	195	104	54	29	21	15	5&period;7	4&period;1
Rated speed rpm	1200	253	178	94	48	25	18	13	5&period;1	3&period;8
Rated torque kg&period;cm	0&period;08	0&period;3	0&period;5	0&period;7	1&period;4	2&period;5	3&period;5	4&period;4	5	5
Max&period;momentary tolerance torque kg&period;cm	0&period;6	2&period;5	3&period;5	5&period;7	11	15	15	15	15	15

###

Reduction ratio	4	19	27	51	100	189	264	369	981	1370
Length mm	23	23	23	33	33	38	38	38	43	43
No-load speed rpm	1300	280	195	104	54	29	21	15	5&period;7	4&period;1
Rated speed rpm	1200	253	178	94	48	25	18	13	5&period;1	3&period;8
Rated torque kg&period;cm	0&period;08	0&period;3	0&period;5	0&period;7	1&period;4	2&period;5	3&period;5	4&period;4	5	5
Max&period;momentary tolerance torque kg&period;cm	0&period;6	2&period;5	3&period;5	5&period;7	11	15	15	15	15	15

###

Reduction ratio	4	19	27	51	100	189	264	369	981	1370
Length mm	23	23	23	33	33	38	38	38	43	43
No-load speed rpm	870	180	130	69	35	19	13&period;5	10	3&period;8	2&period;7
Rated speed rpm	750	158	110	59	30	16	11&period;4	8	3&period;5	2&period;6
Rated torque kg&period;cm	0&period;65	0&period;3	0&period;4	0&period;6	1&period;2	2&period;1	2&period;9	4	5	5
Max&period;momentary tolerance torque kg&period;cm	0&period;4	1&period;7	2&period;4	3&period;8	7&period;5	13	15	15	15	15

###

Other Applications&colon;
Business Machines&colon;	ATM, Copiers and Scanners, Currency Handling, Point of Sale, Printers, Vending Machines&period;
Food and Beverage&colon;	Beverage Dispensing, Hand Blenders, Blenders, Mixers, Coffee Machines, Food Processors, Juicers, Fryers, Ice Makers, Soy Bean Milk Makers&period;
Home Entertainment and Gaming&colon;	Gaming Machines, Video Games, Optical Disk Drives, RC and Power Toys&period;
Home Technologies&colon;	Home Ventilation, Air Purifiers and Dehumidifiers, Range Hoods, Washers and Dryers, Refrigerators, Dishwashers, Floor Care, Whirlpool and Spa, Showers, Smart Metering, Coffee Machines&period;
Lawn and Garden&colon;	Lawn Mowers, Snow Blowers, Trimmers, Leaf Blowers&period;
Personal Care&colon;	Hair Cutting, Hair Care, Massagers&period;
Power Tools&colon;	Drills and Drivers, Sanders, Grinders, Polishers, Saws&period;
Camera and Optical&colon;	Video, Cameras, Projectors&period;

How to Select a Gear Motor

Angular geared motors

Planetary gearboxes

Hydraulic gear motors

Croise motors

China 12V DC planetary small gear motor for Air Purifiers manufacturer
editor by czh 2023-01-18

China High Torque 30W 50W 80W Planetary 12V 24V DC Electric Motor with Reduction Gear with Good quality

Leave a reply

Merchandise Description

Glow Motors Solution Presentation

1. Features

1) 16 poles with 3 phases exterior rotor
two) Reduced torque ripple
three) Large inertia torque
four) Compact design and style
five) Insulation class B
six) Application: Health care, Automation

2. Efficiency parameters

Item	Directions
Winding sort	Star
Corridor result angle	120 degree electrical angle
Resistance Accuracy	±10% @20ºC
Inductance Precision	±20% @1kHz
Ambient Temperature	-20ºC~+50ºC
Insulation Resistance	100MΩMin. ,500VDC
Dielectric Strength	500VAC for 1 minute
Shaft Radial Enjoy	.02Max. (450 g-load)
Shaft Axial Engage in	.15Max. (450 g-load)
Insulation class	Course B

3. Mechanical Dimensions

four. Wiring recommendations

Lead Color	Guide Gauge	Operate	Instructions
Crimson	UL1430 26AWG	Vcc	Corridor positive:+5V~+24V DC
BLUE		Hall A
Inexperienced		Hall B
WHITE		Corridor C
BLACK		GND	HALL unfavorable
YELLOW	UL1430 20AWG	Period U
Purple		Period V
BLACK		Phase W

5. Shnmotor Prime Rated Merchandise

six. Package

1.FedEX / DHL / UPS / TNT for samples,Door to door services
two.By sea for batch merchandise
3.Customs specifying freight forwarders or negotiable shipping techniques
four.Supply Time:20-twenty five Times for samples30-35 Days for batch goods
5.Payment Phrases:T/T,L/C at sight,D/P etc.

seven. FAQ

Q1. When can I get the quotation?
We generally estimate inside of 24 hrs after we get your inquiry.
If you are urgent to get the price tag, you should deliver the message on and or phone us straight.

Q2. How can I get a sample to verify your good quality?
Right after cost verified, you can requiry for samples to verify top quality.
If you need the samples, we will demand for the sample cost.
But the sample value can be refundable when your quantity of 1st purchase is earlier mentioned the MOQ

Q3. Can you do OEM for us?
Sure, the merchandise packing can be made as you want.

Q4. How about MOQ?
1 pcs for carton box.

Q5. What is your main market?
Jap Europe, Southeast Asia, South The usa.

You should feel free to speak to us if you have any query.

US $5.5-50
/ Piece
| 100 Pieces

(Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated\| Freight Cost Calculator

###

Application:	Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed:	Adjust Speed
Excitation Mode:	Excited

###

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Order Sample

###

Customization:	Available \| Customized Request

###

Item	Instructions
Winding type	Star
Hall effect angle	120 degree electrical angle
Resistance Accuracy	±10% @20ºC
Inductance Accuracy	±20% @1kHz
Ambient Temperature	-20ºC~+50ºC
Insulation Resistance	100MΩMin. ,500VDC
Dielectric Strength	500VAC for one minute
Shaft Radial Play	0.02Max. (450 g-load)
Shaft Axial Play	0.15Max. (450 g-load)
Insulation class	Class B

###

Lead Color	Lead Gauge	Function	Instructions
RED	UL1430 26AWG	Vcc	Hall positive:+5V~+24V DC
BLUE		HALL A
GREEN		HALL B
WHITE		HALL C
BLACK		GND	HALL negative
YELLOW	UL1430 20AWG	PHASE U
RED		PHASE V
BLACK		PHASE W

US $5.5-50
/ Piece
| 100 Pieces

(Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated\| Freight Cost Calculator

###

Application:	Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed:	Adjust Speed
Excitation Mode:	Excited

###

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Order Sample

###

Customization:	Available \| Customized Request

###

Item	Instructions
Winding type	Star
Hall effect angle	120 degree electrical angle
Resistance Accuracy	±10% @20ºC
Inductance Accuracy	±20% @1kHz
Ambient Temperature	-20ºC~+50ºC
Insulation Resistance	100MΩMin. ,500VDC
Dielectric Strength	500VAC for one minute
Shaft Radial Play	0.02Max. (450 g-load)
Shaft Axial Play	0.15Max. (450 g-load)
Insulation class	Class B

###

Lead Color	Lead Gauge	Function	Instructions
RED	UL1430 26AWG	Vcc	Hall positive:+5V~+24V DC
BLUE		HALL A
GREEN		HALL B
WHITE		HALL C
BLACK		GND	HALL negative
YELLOW	UL1430 20AWG	PHASE U
RED		PHASE V
BLACK		PHASE W

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China High Torque 30W 50W 80W Planetary 12V 24V DC Electric Motor with Reduction Gear with Good quality
editor by czh 2023-01-17

China High Torque Low Rpm Brushed Electric DC Planetary Gear Motor for Sweeping Robot motor armature

Leave a reply

Solution Description

16ZYJ DC Equipment Motor
Basic Details
Item			Data
Tem Rise			40K
Working Tem			(-20ºC~+80ºC)
Insulation Resistance			100MΩ min 500VDC
Surge Test			500VAC for 1min
Insulation Course			E
Weight			45g

Specification
PN	Rated Voltage	First Pace	Ratio	Electricity	Noload Pace	Noload Present	Rated Velocity	Rated Current	Rated Torque	Stall Torque	Stall Current
PN	V DC	rpm	one:xxx	W	rpm	mA	rpm	mA	Kg.cm	Kg.cm	mA
16ZYJ-75A	3	7500	100	two.two	seventy five	80	60	a hundred and fifty	1.8	3	600
16ZYJ-100A	6	15000	150	2.two	one hundred	eighty	130	160	2	3.5	600
16ZYJ-500A	nine	15000	30	2.2	500	eighty	400	200	1	2	600

Probond motors types brush, brushless, stepper, hysteresis and linear motors to meet up with customers requirements.

Our motors use regular and unique parts with client picked torque/speed needs that can be modified to your programs.

The AC/DC gear motors are primarily based upon to distinct magetic circuits that improve motor design for substantial speed low torque and reduced speed high torque.

These motors give you lower rotational losses, superb thermal transfer, interchangeable conclude caps, easily sealed. Options incorporate connectors, encoders, shaft modifications, dimensional alterations, etc.

Probond motor owns specialist product sales crew and engineer team with more than 10 several years experience in motor industry, dependent on China mainland dealing with abroad organization for years, we know your requirements much better than other individuals.

Probond Sonicare Toothbrush Motor and Thermostatic Valve Hysteresis Motor are our sizzling products on market in 2017 with extremely good quality level and competitive value.

Make sure you kindly speak to us to get a catalogue.

Shipping&Payment

Conditions of price	FOB,CIF,CFR,EXW,DDP,and so on.
Terms of payment	a hundred% T/T in advance for samples
Terms of payment	Bulk amount payment way can be negotited
Warranty	12 months restricted warranty as soon as the objects are delivered to the customer.
Direct time	Normally in 2 weeks for trial orders, inside of 3 weeks for bulk orders.
Deal	Carton o plywood pallet.
Location of loading	ZheJiang , HangZhou, and many others.
Shipment provider	Products are normally shipped through Fedex,DHL,TNT,UPS,EMS for demo orders and by means of vessel for bulk orders.
Supply time	Normally inside of 5 working times by Express 15-30 working times by vessel

Our guarantee to our Consumers:
1.  Answer customer’s inquiry inside of 2 working times.
two.  Reply to our customer queries & Concerns in 3 working days.
three.  Acknowledge Buyer acquire orders in 24 hrs.
4.  Standard Lead time is in 4 weeks.  Respond to special product growth inside fifteen weeks.
5.  Flexible shipping techniques:  By air, sea and convey carrier using the customer’s forwarder.

Application:	Universal, Industrial, Household Appliances, Car, Power Tools, Robot
Operating Speed:	High Speed
Excitation Mode:	Excited
Function:	Control, Driving
Casing Protection:	Open Type
Number of Poles:	6

###

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

16ZYJ DC Gear Motor
Basic Info
Item			Data
Tem Rise			40K
Working Tem			(-20ºC~+80ºC)
Insulation Resistance			100MΩ min 500VDC
Surge Test			500VAC for 1min
Insulation Class			E
Weight			45g

###

Specification
PN	Rated Voltage	Initial Speed	Ratio	Power	Noload Speed	Noload Current	Rated Speed	Rated Current	Rated Torque	Stall Torque	Stall Current
PN	V DC	rpm	1:xxx	W	rpm	mA	rpm	mA	Kg.cm	Kg.cm	mA
16ZYJ-75A	3	7500	100	2.2	75	80	60	150	1.8	3	600
16ZYJ-100A	6	15000	150	2.2	100	80	130	160	2	3.5	600
16ZYJ-500A	9	15000	30	2.2	500	80	400	200	1	2	600

###

Terms of price	FOB,CIF,CFR,EXW,DDP,etc.
Terms of payment	100% T/T in advance for samples
Terms of payment	Bulk quantity payment way can be negotited
Warranty	12 months limited warranty once the items are delivered to the buyer.
Lead time	Usually within 2 weeks for trial orders, within 3 weeks for bulk orders.
Package	Carton o plywood pallet.
Place of loading	Shanghai, Ningbo, etc.
Shipment carrier	Items are usually shipped via Fedex,DHL,TNT,UPS,EMS for trial orders and via vessel for bulk orders.
Delivery time	Usually within 5 working days by Express 15-30 working days by vessel

Application:	Universal, Industrial, Household Appliances, Car, Power Tools, Robot
Operating Speed:	High Speed
Excitation Mode:	Excited
Function:	Control, Driving
Casing Protection:	Open Type
Number of Poles:	6

###

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

16ZYJ DC Gear Motor
Basic Info
Item			Data
Tem Rise			40K
Working Tem			(-20ºC~+80ºC)
Insulation Resistance			100MΩ min 500VDC
Surge Test			500VAC for 1min
Insulation Class			E
Weight			45g

###

Specification
PN	Rated Voltage	Initial Speed	Ratio	Power	Noload Speed	Noload Current	Rated Speed	Rated Current	Rated Torque	Stall Torque	Stall Current
PN	V DC	rpm	1:xxx	W	rpm	mA	rpm	mA	Kg.cm	Kg.cm	mA
16ZYJ-75A	3	7500	100	2.2	75	80	60	150	1.8	3	600
16ZYJ-100A	6	15000	150	2.2	100	80	130	160	2	3.5	600
16ZYJ-500A	9	15000	30	2.2	500	80	400	200	1	2	600

###

Terms of price	FOB,CIF,CFR,EXW,DDP,etc.
Terms of payment	100% T/T in advance for samples
Terms of payment	Bulk quantity payment way can be negotited
Warranty	12 months limited warranty once the items are delivered to the buyer.
Lead time	Usually within 2 weeks for trial orders, within 3 weeks for bulk orders.
Package	Carton o plywood pallet.
Place of loading	Shanghai, Ningbo, etc.
Shipment carrier	Items are usually shipped via Fedex,DHL,TNT,UPS,EMS for trial orders and via vessel for bulk orders.
Delivery time	Usually within 5 working days by Express 15-30 working days by vessel

Benefits of a Planetary Motor

Solar gear

Sun gear

Planetary gear

Planetary gearbox

Planetary gear motor

China High Torque Low Rpm Brushed Electric DC Planetary Gear Motor for Sweeping Robot motor armature
editor by czh 2023-01-16