Product Description
| Model | CBB61 Fan Capacitor |
| Safety approvals | UL/TUV/VDE/CQC |
| Quoted standard | GB/T3667.1, UL810 ,EN65712-1 |
| Type of working | Continuous |
| Operating class | CLASS B – 10000 hours CLASS C – 3000 hours |
| /Operating Min. / MaxTemperature: | -25/70ºC;-40/70ºC;-40/85ºC;-40/105ºC |
| Storage: | -40 / 70ºC |
| Rated Voltage UN (a.c.): | 250~450 Volt a.c. |
| Rated Frequency fN(Hz): | 50Hz / 60Hz |
| Voltage rise/fall time (max): | 15 Volt / µs |
| Maximum Permissible Voltage: | 1.10 x Rated Voltage |
| Maximum Permissible Current: | 1.30 x Rated Current |
| Dissipation factor, tgδ: | 20 x 10-4 at 20°C, 50 Hz |
| Class of safety protection: | S3(P2) |
| Maximum altitude: | 2000 m |
| Capacitance Tolerance (standard) | ± 5 % |
| Mounting: | Any position |
| Case | ABS,PBT,V0 (UL94 standard) |
| Filling Resin | Self-extinguishing epoxy V0(UL94 standard) |
| Dielectric | Polypropylene film |
| Plates | Self-healing metal layer, Segmented film |
| Voltage test terminal to terminal | 2 x UN for 5 s |
| Voltage test terminal to case: | 2200 Volt for 2 s |
| Insulation resistance (20ºC) | Between terminals≥2000MΩ .μF (500Vdc,60s) |
| Leakage – Clearance in air between parts under voltage | ≥ 5mm |
| Vibration test | IEC 60068-2-6 |
CBB65 Electronics Component Film Motor Run High Voltage AC Power Knitting Machine Capacitor
braking resistor choke coil capacitor resistor facon capacitor distributor knitting machine capacitor capacitor price energy discharge capacitor
hisense washing machine and dryer energy discharge capacitor electrolytic capacitor super capacitor epcos capacitor polyester capacitor capacitor bank high voltage capacitor capacitor for motor starting fan capacitor CBB65cbb65 capacitor, air conditioner motor run capacitor, motor run capacitor, compressor capacitor, aluminum capacitor, washing machine capacitor.
Cbb65 AC dual capacitor 1.Widely applied to starting and running of AC single-phase motors at 50Hz/60Hz frequency power Self-healing property
High stability and reliablity Safer with Anti-explosion design.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Dry Type Metalized Polypropylene Film Capacitor |
|---|---|
| Model: | Cbb61 Terminal Type Capacitor |
| Rated Voltage: | 250V.AC~450V.AC |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Can AC motors be used in both residential and commercial settings?
Yes, AC motors can be used in both residential and commercial settings. The versatility and wide range of applications of AC motors make them suitable for various environments and purposes.
In residential settings, AC motors are commonly found in household appliances such as refrigerators, air conditioners, washing machines, fans, and pumps. These motors are designed to meet the specific requirements of residential applications, providing reliable and efficient operation for everyday tasks. For example, air conditioners utilize AC motors to drive the compressor and fan, while washing machines use AC motors for agitating and spinning the drum.
In commercial settings, AC motors are extensively used in a wide range of applications across different industries. They power machinery, equipment, and systems that are crucial for commercial operations. Some common examples include:
- Industrial machinery and manufacturing equipment: AC motors drive conveyor belts, pumps, compressors, mixers, fans, blowers, and other machinery used in manufacturing, production, and processing facilities.
- HVAC systems: AC motors are used in commercial heating, ventilation, and air conditioning (HVAC) systems to drive fans, blowers, and pumps for air circulation, cooling, and heating.
- Commercial refrigeration: AC motors are utilized in commercial refrigeration systems for powering compressors, condenser fans, and evaporator fans in supermarkets, restaurants, and cold storage facilities.
- Office equipment: AC motors are present in various office equipment such as printers, photocopiers, scanners, and ventilation systems, ensuring their proper functioning.
- Transportation: AC motors are used in electric vehicles, trams, trains, and other forms of electric transportation systems, providing the necessary propulsion.
- Water and wastewater treatment: AC motors power pumps, mixers, and blowers in water treatment plants, wastewater treatment plants, and pumping stations.
The adaptability, efficiency, and controllability of AC motors make them suitable for a wide range of residential and commercial applications. Whether it’s powering household appliances or driving industrial machinery, AC motors play a vital role in meeting the diverse needs of both residential and commercial settings.
What are the safety considerations when working with or around AC motors?
Working with or around AC motors requires careful attention to safety to prevent accidents, injuries, and electrical hazards. Here are some important safety considerations to keep in mind:
- Electrical Hazards: AC motors operate on high voltage electrical systems, which pose a significant electrical hazard. It is essential to follow proper lockout/tagout procedures when working on motors to ensure that they are de-energized and cannot accidentally start up. Only qualified personnel should perform electrical work on motors, and they should use appropriate personal protective equipment (PPE), such as insulated gloves, safety glasses, and arc flash protection, to protect themselves from electrical shocks and arc flash incidents.
- Mechanical Hazards: AC motors often drive mechanical equipment, such as pumps, fans, or conveyors, which can present mechanical hazards. When working on or near motors, it is crucial to be aware of rotating parts, belts, pulleys, or couplings that can cause entanglement or crushing injuries. Guards and safety barriers should be in place to prevent accidental contact with moving parts, and proper machine guarding principles should be followed. Lockout/tagout procedures should also be applied to the associated mechanical equipment to ensure it is safely de-energized during maintenance or repair.
- Fire and Thermal Hazards: AC motors can generate heat during operation, and in some cases, excessive heat can pose a fire hazard. It is important to ensure that motors are adequately ventilated to dissipate heat and prevent overheating. Motor enclosures and cooling systems should be inspected regularly to ensure proper functioning. Additionally, combustible materials should be kept away from motors to reduce the risk of fire. If a motor shows signs of overheating or emits a burning smell, it should be immediately shut down and inspected by a qualified professional.
- Proper Installation and Grounding: AC motors should be installed and grounded correctly to ensure electrical safety. Motors should be installed according to manufacturer guidelines, including proper alignment, mounting, and connection of electrical cables. Adequate grounding is essential to prevent electrical shocks and ensure the safe dissipation of fault currents. Grounding conductors, such as grounding rods or grounding straps, should be properly installed and regularly inspected to maintain their integrity.
- Safe Handling and Lifting: AC motors can be heavy and require proper handling and lifting techniques to prevent musculoskeletal injuries. When moving or lifting motors, equipment such as cranes, hoists, or forklifts should be used, and personnel should be trained in safe lifting practices. It is important to avoid overexertion and use proper lifting tools, such as slings or lifting straps, to distribute the weight evenly and prevent strain or injury.
- Training and Awareness: Proper training and awareness are critical for working safely with or around AC motors. Workers should receive training on electrical safety, lockout/tagout procedures, personal protective equipment usage, and safe work practices. They should be familiar with the specific hazards associated with AC motors and understand the appropriate safety precautions to take. Regular safety meetings and reminders can help reinforce safe practices and keep safety at the forefront of everyone’s minds.
It is important to note that the safety considerations mentioned above are general guidelines. Specific safety requirements may vary depending on the motor size, voltage, and the specific workplace regulations and standards in place. It is crucial to consult relevant safety codes, regulations, and industry best practices to ensure compliance and maintain a safe working environment when working with or around AC motors.
What are the key advantages of using AC motors in industrial applications?
AC motors offer several key advantages that make them highly suitable for industrial applications. Here are some of the main advantages:
- Simple and Robust Design: AC motors, particularly induction motors, have a simple and robust design, making them reliable and easy to maintain. They consist of fewer moving parts compared to other types of motors, which reduces the likelihood of mechanical failure and the need for frequent maintenance.
- Wide Range of Power Ratings: AC motors are available in a wide range of power ratings, from small fractional horsepower motors to large industrial motors with several megawatts of power. This versatility allows for their application in various industrial processes and machinery, catering to different power requirements.
- High Efficiency: AC motors, especially modern designs, offer high levels of efficiency. They convert electrical energy into mechanical energy with minimal energy loss, resulting in cost savings and reduced environmental impact. High efficiency also means less heat generation, contributing to the longevity and reliability of the motor.
- Cost-Effectiveness: AC motors are generally cost-effective compared to other types of motors. Their simple construction and widespread use contribute to economies of scale, making them more affordable for industrial applications. Additionally, AC motors often have lower installation and maintenance costs due to their robust design and ease of operation.
- Flexible Speed Control: AC motors, particularly induction motors, offer various methods for speed control, allowing for precise adjustment of motor speed to meet specific industrial requirements. Speed control mechanisms such as variable frequency drives (VFDs) enable enhanced process control, energy savings, and improved productivity.
- Compatibility with AC Power Grid: AC motors are compatible with the standard AC power grid, which is widely available in industrial settings. This compatibility simplifies the motor installation process and eliminates the need for additional power conversion equipment, reducing complexity and cost.
- Adaptability to Various Environments: AC motors are designed to operate reliably in a wide range of environments. They can withstand variations in temperature, humidity, and dust levels commonly encountered in industrial settings. Additionally, AC motors can be equipped with protective enclosures to provide additional resistance to harsh conditions.
These advantages make AC motors a popular choice for industrial applications across various industries. Their simplicity, reliability, cost-effectiveness, energy efficiency, and speed control capabilities contribute to improved productivity, reduced operational costs, and enhanced process control in industrial settings.
editor by CX 2024-05-10
China factory 6.6kv High Voltage 3-Phase Electric AC Motor 60kw Electric Motor Price with Best Sales
Product Description
Product Description
HangZhoustone Three Phase Electrical/Electirc AC Motor
High voltage ac electric motor series adopts foreign advanced technology, combined with the company’s own practical experience in producing high voltage ac motor designed and manufactured. HangZhoustone’s high-voltage AC motors meet the relevant standards of the International Electrotechnical Commission (IEC), its rated frequency is 50Hz, rated voltage is 3KV, 6KV, 10KV, we can also manufacture 60Hz and other voltage high-voltage electric ac motors according to customer requirements.
Introduction of the Cooling method of the different high voltage electrical/elctric ac motor series:
| Model | Cooling | IP Grade | Cooling Structure |
| Y,YX,YR | Open IC01 | IP23 | Ventilator hood on top Without ventilator on top but ventilation opening on housing side |
| YKS,YRKS | Air/water cooling, enclosed IC81W | IP44/IP54 | Air /water cooler on housing top |
| YKK,YXKK | Air/air cooling, enclosed IC611 | IP44/IP54 | Air /water cooler on housing top |
| YRKK | Air/air cooling, enclosed IC611 | IP44/IP54 | Air /water cooler on housing top |
Structure of High voltage Electrical/Electric AC Motor
1.High voltage ac motor adopts box structure, and the base is welded into a box by steel plate, which is light in weight and good in stiffness.
2.The stator adopts an external press mounting structure. The stator winding adopts Class F insulating materials and corona resistant materials. The winding end is fixed using a special binding process, which is firm and reliable. The entire stator is treated by vacuum pressure impregnation without solvent paint. The motor has excellent and reliable insulation performance, good mechanical strength, and strong moisture resistance.
3.The squirrel cage rotor has 2 structures: cast aluminum and copper bar, which are manufactured by advanced and reliable cast aluminum process or welding process.
4.The wound rotor is made of Class F insulating material, which is treated by vacuum pressure impregnation and non solvent paint process, and has undergone accurate dynamic balance verification.
5.The bearings have 2 types, rolling bearings and sliding bearings. What type is adopted depends on electric motor power and speed. Its protection degree is either IP44 or IP54.
6.The electrical ac motors with rolling bearings have greasing and discharging device, which enable no-stop operation. Special greasingtools are equipped.
7.The terminal box is a sealed structure, generally installed on the right side of the motor, and can also be customized according to user requirements.
The Structure Specifications of High Voltage AC Electric Motor
HangZhoustone Electric AC Motor Service
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Operating Speed: | Constant Speed |
| Number of Stator: | Three-Phase |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What role do AC motors play in HVAC (heating, ventilation, and air conditioning) systems?
In HVAC (heating, ventilation, and air conditioning) systems, AC motors play a crucial role in various components and functions. These motors are responsible for powering fans, compressors, pumps, and other essential equipment within the HVAC system. Let’s explore the specific roles of AC motors in HVAC systems:
- Air Handling Units (AHUs) and Ventilation Systems: AC motors drive the fans in AHUs and ventilation systems. These fans draw in fresh air, circulate air within the building, and exhaust stale air. The motors provide the necessary power to move air through the ductwork and distribute it evenly throughout the space. They play a key role in maintaining proper indoor air quality, controlling humidity, and ensuring adequate ventilation.
- Chillers and Cooling Towers: HVAC systems that use chillers for cooling rely on AC motors to drive the compressor. The motor powers the compressor, which circulates refrigerant through the system, absorbing heat from the indoor environment and releasing it outside. AC motors are also used in cooling towers, which dissipate heat from the chiller system by evaporating water. The motors drive the fans that draw air through the cooling tower and enhance heat transfer.
- Heat Pumps: AC motors are integral components of heat pump systems, which provide both heating and cooling. The motor drives the compressor in the heat pump, enabling the transfer of heat between the indoor and outdoor environments. During cooling mode, the motor circulates refrigerant to extract heat from indoors and release it outside. In heating mode, the motor reverses the refrigerant flow to extract heat from the outdoor air or ground and transfer it indoors.
- Furnaces and Boilers: In heating systems, AC motors power the blowers or fans in furnaces and boilers. The motor drives the blower to distribute heated air or steam throughout the building. This helps maintain a comfortable indoor temperature and ensures efficient heat distribution in the space.
- Pumps and Circulation Systems: HVAC systems often incorporate pumps for water circulation, such as in hydronic heating or chilled water systems. AC motors drive these pumps, providing the necessary pressure to circulate water or other heat transfer fluids through the system. The motors ensure efficient flow rates and contribute to the effective transfer of thermal energy.
- Dampers and Actuators: AC motors are used in HVAC systems to control airflow and regulate the position of dampers and actuators. These motors enable the adjustment of airflow rates, temperature control, and zone-specific climate control. By modulating the motor speed or position, HVAC systems can achieve precise control of air distribution and temperature in different areas of a building.
AC motors in HVAC systems are designed to meet specific performance requirements, such as variable speed control, energy efficiency, and reliable operation under varying loads. Maintenance and regular inspection of these motors are essential to ensure optimal performance, energy efficiency, and longevity of the HVAC system.
In conclusion, AC motors play vital roles in HVAC systems by powering fans, compressors, pumps, and actuators. They enable proper air circulation, temperature control, and efficient transfer of heat, contributing to the overall comfort, air quality, and energy efficiency of buildings.
What are the safety considerations when working with or around AC motors?
Working with or around AC motors requires careful attention to safety to prevent accidents, injuries, and electrical hazards. Here are some important safety considerations to keep in mind:
- Electrical Hazards: AC motors operate on high voltage electrical systems, which pose a significant electrical hazard. It is essential to follow proper lockout/tagout procedures when working on motors to ensure that they are de-energized and cannot accidentally start up. Only qualified personnel should perform electrical work on motors, and they should use appropriate personal protective equipment (PPE), such as insulated gloves, safety glasses, and arc flash protection, to protect themselves from electrical shocks and arc flash incidents.
- Mechanical Hazards: AC motors often drive mechanical equipment, such as pumps, fans, or conveyors, which can present mechanical hazards. When working on or near motors, it is crucial to be aware of rotating parts, belts, pulleys, or couplings that can cause entanglement or crushing injuries. Guards and safety barriers should be in place to prevent accidental contact with moving parts, and proper machine guarding principles should be followed. Lockout/tagout procedures should also be applied to the associated mechanical equipment to ensure it is safely de-energized during maintenance or repair.
- Fire and Thermal Hazards: AC motors can generate heat during operation, and in some cases, excessive heat can pose a fire hazard. It is important to ensure that motors are adequately ventilated to dissipate heat and prevent overheating. Motor enclosures and cooling systems should be inspected regularly to ensure proper functioning. Additionally, combustible materials should be kept away from motors to reduce the risk of fire. If a motor shows signs of overheating or emits a burning smell, it should be immediately shut down and inspected by a qualified professional.
- Proper Installation and Grounding: AC motors should be installed and grounded correctly to ensure electrical safety. Motors should be installed according to manufacturer guidelines, including proper alignment, mounting, and connection of electrical cables. Adequate grounding is essential to prevent electrical shocks and ensure the safe dissipation of fault currents. Grounding conductors, such as grounding rods or grounding straps, should be properly installed and regularly inspected to maintain their integrity.
- Safe Handling and Lifting: AC motors can be heavy and require proper handling and lifting techniques to prevent musculoskeletal injuries. When moving or lifting motors, equipment such as cranes, hoists, or forklifts should be used, and personnel should be trained in safe lifting practices. It is important to avoid overexertion and use proper lifting tools, such as slings or lifting straps, to distribute the weight evenly and prevent strain or injury.
- Training and Awareness: Proper training and awareness are critical for working safely with or around AC motors. Workers should receive training on electrical safety, lockout/tagout procedures, personal protective equipment usage, and safe work practices. They should be familiar with the specific hazards associated with AC motors and understand the appropriate safety precautions to take. Regular safety meetings and reminders can help reinforce safe practices and keep safety at the forefront of everyone’s minds.
It is important to note that the safety considerations mentioned above are general guidelines. Specific safety requirements may vary depending on the motor size, voltage, and the specific workplace regulations and standards in place. It is crucial to consult relevant safety codes, regulations, and industry best practices to ensure compliance and maintain a safe working environment when working with or around AC motors.
What is an AC motor, and how does it differ from a DC motor?
An AC motor, also known as an alternating current motor, is a type of electric motor that operates on alternating current. It converts electrical energy into mechanical energy through the interaction of magnetic fields. AC motors are widely used in various applications, ranging from household appliances to industrial machinery. Here’s a detailed explanation of what an AC motor is and how it differs from a DC motor:
AC Motor:
An AC motor consists of two main components: the stator and the rotor. The stator is the stationary part of the motor and contains the stator windings. These windings are typically made of copper wire and are arranged in specific configurations to create a rotating magnetic field when energized by an alternating current. The rotor, on the other hand, is the rotating part of the motor and is typically made of laminated steel cores with conducting bars or coils. The rotor windings are connected to a shaft, and their interaction with the rotating magnetic field produced by the stator causes the rotor to rotate.
The operation of an AC motor is based on the principles of electromagnetic induction. When the stator windings are energized with an AC power supply, the changing magnetic field induces a voltage in the rotor windings, which in turn creates a magnetic field. The interaction between the rotating magnetic field of the stator and the magnetic field of the rotor produces a torque, causing the rotor to rotate. The speed of rotation depends on the frequency of the AC power supply and the number of poles in the motor.
DC Motor:
A DC motor, also known as a direct current motor, operates on direct current. Unlike an AC motor, which relies on the interaction of magnetic fields to generate torque, a DC motor uses the principle of commutation to produce rotational motion. A DC motor consists of a stator and a rotor, similar to an AC motor. The stator contains the stator windings, while the rotor consists of a rotating armature with coils or permanent magnets.
In a DC motor, when a direct current is applied to the stator windings, a magnetic field is created. The rotor, either through the use of brushes and a commutator or electronic commutation, aligns itself with the magnetic field and begins to rotate. The direction of the current in the rotor windings is continuously reversed to ensure continuous rotation. The speed of a DC motor can be controlled by adjusting the voltage applied to the motor or by using electronic speed control methods.
Differences:
The main differences between AC motors and DC motors are as follows:
- Power Source: AC motors operate on alternating current, which is the standard power supply in most residential and commercial buildings. DC motors, on the other hand, require direct current and typically require a power supply that converts AC to DC.
- Construction: AC motors and DC motors have similar construction with stators and rotors, but the design and arrangement of the windings differ. AC motors generally have three-phase windings, while DC motors can have either armature windings or permanent magnets.
- Speed Control: AC motors typically operate at fixed speeds determined by the frequency of the power supply and the number of poles. DC motors, on the other hand, offer more flexibility in speed control and can be easily adjusted over a wide range of speeds.
- Efficiency: AC motors are generally more efficient than DC motors. AC motors can achieve higher power densities and are often more suitable for high-power applications. DC motors, however, offer better speed control and are commonly used in applications that require precise speed regulation.
- Applications: AC motors are widely used in applications such as industrial machinery, HVAC systems, pumps, and compressors. DC motors find applications in robotics, electric vehicles, computer disk drives, and small appliances.
In conclusion, AC motors and DC motors differ in their power source, construction, speed control, efficiency, and applications. AC motors rely on the interaction of magnetic fields and operate on alternating current, while DC motors use commutation and operate on direct current. Each type of motor has its advantages and is suited for different applications based on factors such as power requirements, speed control needs, and efficiency considerations.
editor by CX 2024-05-07
China factory Good Price CHINAMFG AC Servo Motor A2 Series 400W Ecma-C10604RS vacuum pump electric
Product Description
Good Price AC Servo Motor ECMA-C10604RS servo motor for industrial sewing machine
——
| Place of Origin | China |
| Brand Name | Delta |
| Model Number | ECMA-C10604RS |
Product Description
FAQ
>>Why Choose Craftsman?
1. Guarantee the quality:
All goods are 100% CHINAMFG New Original.
2.Technology support:
We’re in this field many year. If there’s any problem, please contact with us,we’ll provide suggestion from our engineer and the Manufacturer to help you solve problem.
3.Warranty:
Except for man-made damage,all products we sell have 12 months maintenance-free policy from the day of shipment, but the buyer is responsible for all the shipping cost incurred.
4.Repairing:
We can provide the repairing service for PLC,Inverter,servo motor&driver,HMI etc.
5.Collect products:
We can help our customers to collect products from other suppliers,and send them together for saving shipping charge.
6.Help to buy:
We can help our customers to buy other kind of goods in china.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Speed: | Low Speed |
| Number of Stator: | Single-Phase |
| Function: | Driving, Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 2 |
| Samples: |
US$ 135/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
What factors should be considered when selecting an AC motor for a particular application?
When selecting an AC motor for a particular application, several factors need to be considered to ensure the motor meets the requirements and performs optimally. Here are the key factors to consider:
- Power Requirements: Determine the power requirements of the application, including the required torque and speed. The motor should have adequate power output to meet the demands of the specific task. Consider factors such as starting torque, running torque, and speed range to ensure the motor can handle the load effectively.
- Motor Type: There are different types of AC motors, including induction motors, synchronous motors, and brushless DC motors. Each type has its own characteristics and advantages. Consider the application’s requirements and factors such as speed control, efficiency, and starting torque to determine the most suitable motor type.
- Environmental Conditions: Assess the environmental conditions in which the motor will operate. Factors such as temperature, humidity, dust, and vibration levels can impact motor performance and longevity. Choose a motor that is designed to withstand the specific environmental conditions of the application.
- Size and Space Constraints: Consider the available space for motor installation. Ensure that the physical dimensions of the motor, including its length, diameter, and mounting arrangement, are compatible with the available space. Additionally, consider the weight of the motor if it needs to be mounted or transported.
- Efficiency: Energy efficiency is an important consideration, as it can impact operational costs and environmental sustainability. Look for motors with high efficiency ratings, which indicate that they convert electrical energy into mechanical energy with minimal energy loss. Energy-efficient motors can lead to cost savings and reduced environmental impact over the motor’s lifespan.
- Control and Speed Requirements: Determine if the application requires precise speed control or if a fixed speed motor is sufficient. If variable speed control is needed, consider motors that can be easily controlled using variable frequency drives (VFDs) or other speed control mechanisms. For applications that require high-speed operation, select a motor that can achieve the desired speed range.
- Maintenance and Serviceability: Assess the maintenance requirements and serviceability of the motor. Consider factors such as the accessibility of motor components, ease of maintenance, availability of spare parts, and the manufacturer’s reputation for reliability and customer support. A motor that is easy to maintain and service can help minimize downtime and repair costs.
- Budget: Consider the budget constraints for the motor selection. Balance the desired features and performance with the available budget. In some cases, investing in a higher quality, more efficient motor upfront can lead to long-term cost savings due to reduced energy consumption and maintenance requirements.
By carefully considering these factors, it is possible to select an AC motor that aligns with the specific requirements of the application, ensuring optimal performance, efficiency, and reliability.
What are the common signs of AC motor failure, and how can they be addressed?
AC motor failure can lead to disruptions in various industrial and commercial applications. Recognizing the common signs of motor failure is crucial for timely intervention and preventing further damage. Here are some typical signs of AC motor failure and potential ways to address them:
- Excessive Heat: Excessive heat is a common indicator of motor failure. If a motor feels excessively hot to the touch or emits a burning smell, it could signify issues such as overloaded windings, poor ventilation, or bearing problems. To address this, first, ensure that the motor is properly sized for the application. Check for obstructions around the motor that may be impeding airflow and causing overheating. Clean or replace dirty or clogged ventilation systems. If the issue persists, consult a qualified technician to inspect the motor windings and bearings and make any necessary repairs or replacements.
- Abnormal Noise or Vibration: Unusual noises or vibrations coming from an AC motor can indicate various problems. Excessive noise may be caused by loose or damaged components, misaligned shafts, or worn bearings. Excessive vibration can result from imbalanced rotors, misalignment, or worn-out motor parts. Addressing these issues involves inspecting and adjusting motor components, ensuring proper alignment, and replacing damaged or worn-out parts. Regular maintenance, including lubrication of bearings, can help prevent excessive noise and vibration and extend the motor’s lifespan.
- Intermittent Operation: Intermittent motor operation, where the motor starts and stops unexpectedly or fails to start consistently, can be a sign of motor failure. This can be caused by issues such as faulty wiring connections, damaged or worn motor brushes, or problems with the motor’s control circuitry. Check for loose or damaged wiring connections and make any necessary repairs. Inspect and replace worn or damaged motor brushes. If the motor still exhibits intermittent operation, it may require professional troubleshooting and repair by a qualified technician.
- Overheating or Tripping of Circuit Breakers: If an AC motor consistently causes circuit breakers to trip or if it repeatedly overheats, it indicates a problem that needs attention. Possible causes include high starting currents, excessive loads, or insulation breakdown. Verify that the motor is not overloaded and that the load is within the motor’s rated capacity. Check the motor’s insulation resistance to ensure it is within acceptable limits. If these measures do not resolve the issue, consult a professional to assess the motor and its electrical connections for any faults or insulation breakdown that may require repair or replacement.
- Decreased Performance or Efficiency: A decline in motor performance or efficiency can be an indication of impending failure. This may manifest as reduced speed, decreased torque, increased energy consumption, or inadequate power output. Factors contributing to decreased performance can include worn bearings, damaged windings, or deteriorated insulation. Regular maintenance, including lubrication and cleaning, can help prevent these issues. If performance continues to decline, consult a qualified technician to inspect the motor and perform any necessary repairs or replacements.
- Inoperative Motor: If an AC motor fails to operate entirely, there may be an issue with the power supply, control circuitry, or internal motor components. Check the power supply and connections for any faults or interruptions. Inspect control circuitry, such as motor starters or contactors, for any damage or malfunction. If no external faults are found, it may be necessary to dismantle the motor and inspect internal components, such as windings or brushes, for any faults or failures that require repair or replacement.
It’s important to note that motor failure causes can vary depending on factors such as motor type, operating conditions, and maintenance practices. Regular motor maintenance, including inspections, lubrication, and cleaning, is essential for early detection of potential failure signs and for addressing issues promptly. When in doubt, it is advisable to consult a qualified electrician, motor technician, or manufacturer’s guidelines for appropriate troubleshooting and repair procedures specific to the motor model and application.
Can you explain the basic working principle of an AC motor?
An AC motor operates based on the principles of electromagnetic induction. It converts electrical energy into mechanical energy through the interaction of magnetic fields. The basic working principle of an AC motor involves the following steps:
- The AC motor consists of two main components: the stator and the rotor. The stator is the stationary part of the motor and contains the stator windings. The rotor is the rotating part of the motor and is connected to a shaft.
- When an alternating current (AC) is supplied to the stator windings, it creates a changing magnetic field.
- The changing magnetic field induces a voltage in the rotor windings, which are either short-circuited conductive bars or coils.
- The induced voltage in the rotor windings creates a magnetic field in the rotor.
- The magnetic field of the rotor interacts with the rotating magnetic field of the stator, resulting in a torque force.
- The torque force causes the rotor to rotate, transferring mechanical energy to the connected shaft.
- The rotation of the rotor continues as long as the AC power supply is provided to the stator windings.
This basic working principle is applicable to various types of AC motors, including induction motors and synchronous motors. However, the specific construction and design of the motor may vary depending on the type and intended application.
editor by CX 2024-04-30
China high quality Factory Price OEM/ODM CE Certificate 2900rpm Capacitor AC Servo Electric Motor for Industrial 7.5kw 1500rpm vacuum pump electric
Product Description
Product Description:
H series permanent magnet synchronous motor is a high efficiency and energy saving motor independently developed and produced by Hui Xunjun. It uses permanent magnet material to generate magnetic field, which has high efficiency, reliable operation, small size, light weight, energy saving and environmental protection, and low noise. It can be matched with servo drive, and realize precise walking and reversing through cooperative motion between servo drive and servo drive, realizing fast response, high stability and high precision control in the whole motion control process. According to the customer’s own characteristics can quickly provide professional customized services. Widely used in machine tools, textile, rewinding, air compressor, fan pump and other industries.
Name plate:
180 series specifications:
Product Feature:
Technical Specification:
Scope of application:
DIMENSION:(UNIT:MM)
Factory outline:
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Function: | Driving |
| Casing Protection: | Protection Type |
| Number of Poles: | 4 |
| Starting Mode: | Direct on-line Starting |
| Certification: | ISO9001 |
| Customization: |
Available
|
|
|---|
Are there specific maintenance requirements for AC motors to ensure optimal performance?
Yes, AC motors have specific maintenance requirements to ensure their optimal performance and longevity. Regular maintenance helps prevent unexpected failures, maximizes efficiency, and extends the lifespan of the motor. Here are some key maintenance practices for AC motors:
- Cleaning and Inspection: Regularly clean the motor to remove dust, dirt, and debris that can accumulate on the motor surfaces and hinder heat dissipation. Inspect the motor for any signs of damage, loose connections, or abnormal noise/vibration. Address any issues promptly to prevent further damage.
- Lubrication: Check the motor’s lubrication requirements and ensure proper lubrication of bearings, gears, and other moving parts. Insufficient or excessive lubrication can lead to increased friction, overheating, and premature wear. Follow the manufacturer’s guidelines for lubrication intervals and use the recommended lubricants.
- Belt and Pulley Maintenance: If the motor is coupled with a belt and pulley system, regularly inspect and adjust the tension of the belts. Improper belt tension can affect motor performance and efficiency. Replace worn-out belts and damaged pulleys as needed.
- Cooling System Maintenance: AC motors often have cooling systems such as fans or heat sinks to dissipate heat generated during operation. Ensure that these cooling systems are clean and functioning properly. Remove any obstructions that may impede airflow and compromise cooling efficiency.
- Electrical Connections: Regularly inspect the motor’s electrical connections for signs of loose or corroded terminals. Loose connections can lead to voltage drops, increased resistance, and overheating. Tighten or replace any damaged connections and ensure proper grounding.
- Vibration Analysis: Periodically perform vibration analysis on the motor to detect any abnormal vibrations. Excessive vibration can indicate misalignment, unbalanced rotors, or worn-out bearings. Address the underlying causes of vibration to prevent further damage and ensure smooth operation.
- Motor Testing: Conduct regular motor testing, such as insulation resistance testing and winding resistance measurement, to assess the motor’s electrical condition. These tests can identify insulation breakdown, winding faults, or other electrical issues that may affect motor performance and reliability.
- Professional Maintenance: For more complex maintenance tasks or when dealing with large industrial motors, it is advisable to involve professional technicians or motor specialists. They have the expertise and tools to perform in-depth inspections, repairs, and preventive maintenance procedures.
It’s important to note that specific maintenance requirements may vary depending on the motor type, size, and application. Always refer to the manufacturer’s guidelines and recommendations for the particular AC motor in use. By following proper maintenance practices, AC motors can operate optimally, minimize downtime, and have an extended service life.
Can you explain the difference between single-phase and three-phase AC motors?
In the realm of AC motors, there are two primary types: single-phase and three-phase motors. These motors differ in their construction, operation, and applications. Let’s explore the differences between single-phase and three-phase AC motors:
- Number of Power Phases: The fundamental distinction between single-phase and three-phase motors lies in the number of power phases they require. Single-phase motors operate using a single alternating current (AC) power phase, while three-phase motors require three distinct AC power phases, typically referred to as phase A, phase B, and phase C.
- Power Supply: Single-phase motors are commonly connected to standard residential or commercial single-phase power supplies. These power supplies deliver a voltage with a sinusoidal waveform, oscillating between positive and negative cycles. In contrast, three-phase motors require a dedicated three-phase power supply, typically found in industrial or commercial settings. Three-phase power supplies deliver three separate sinusoidal waveforms with a specific phase shift between them, resulting in a more balanced and efficient power delivery system.
- Starting Mechanism: Single-phase motors often rely on auxiliary components, such as capacitors or starting windings, to initiate rotation. These components help create a rotating magnetic field necessary for motor startup. Once the motor reaches a certain speed, these auxiliary components may be disconnected or deactivated. Three-phase motors, on the other hand, typically do not require additional starting mechanisms. The three-phase power supply inherently generates a rotating magnetic field, enabling self-starting capability.
- Power and Torque Output: Three-phase motors generally offer higher power and torque output compared to single-phase motors. The balanced nature of three-phase power supply allows for a more efficient distribution of power across the motor windings, resulting in increased performance capabilities. Three-phase motors are commonly used in applications requiring high power demands, such as industrial machinery, pumps, compressors, and heavy-duty equipment. Single-phase motors, with their lower power output, are often used in residential appliances, small commercial applications, and light-duty machinery.
- Efficiency and Smoothness of Operation: Three-phase motors typically exhibit higher efficiency and smoother operation than single-phase motors. The balanced three-phase power supply helps reduce electrical losses and provides a more constant and uniform torque output. This results in improved motor efficiency, reduced vibration, and smoother rotation. Single-phase motors, due to their unbalanced power supply, may experience more pronounced torque variations and slightly lower efficiency.
- Application Suitability: The choice between single-phase and three-phase motors depends on the specific application requirements. Single-phase motors are suitable for powering smaller appliances, such as fans, pumps, household appliances, and small tools. They are commonly used in residential settings where single-phase power is readily available. Three-phase motors are well-suited for industrial and commercial applications that demand higher power levels and continuous operation, including large machinery, conveyors, elevators, air conditioning systems, and industrial pumps.
It’s important to note that while single-phase and three-phase motors have distinct characteristics, there are also hybrid motor designs, such as dual-voltage motors or capacitor-start induction-run (CSIR) motors, which aim to bridge the gap between the two types and offer flexibility in certain applications.
When selecting an AC motor, it is crucial to consider the specific power requirements, available power supply, and intended application to determine whether a single-phase or three-phase motor is most suitable for the task at hand.
What is an AC motor, and how does it differ from a DC motor?
An AC motor, also known as an alternating current motor, is a type of electric motor that operates on alternating current. It converts electrical energy into mechanical energy through the interaction of magnetic fields. AC motors are widely used in various applications, ranging from household appliances to industrial machinery. Here’s a detailed explanation of what an AC motor is and how it differs from a DC motor:
AC Motor:
An AC motor consists of two main components: the stator and the rotor. The stator is the stationary part of the motor and contains the stator windings. These windings are typically made of copper wire and are arranged in specific configurations to create a rotating magnetic field when energized by an alternating current. The rotor, on the other hand, is the rotating part of the motor and is typically made of laminated steel cores with conducting bars or coils. The rotor windings are connected to a shaft, and their interaction with the rotating magnetic field produced by the stator causes the rotor to rotate.
The operation of an AC motor is based on the principles of electromagnetic induction. When the stator windings are energized with an AC power supply, the changing magnetic field induces a voltage in the rotor windings, which in turn creates a magnetic field. The interaction between the rotating magnetic field of the stator and the magnetic field of the rotor produces a torque, causing the rotor to rotate. The speed of rotation depends on the frequency of the AC power supply and the number of poles in the motor.
DC Motor:
A DC motor, also known as a direct current motor, operates on direct current. Unlike an AC motor, which relies on the interaction of magnetic fields to generate torque, a DC motor uses the principle of commutation to produce rotational motion. A DC motor consists of a stator and a rotor, similar to an AC motor. The stator contains the stator windings, while the rotor consists of a rotating armature with coils or permanent magnets.
In a DC motor, when a direct current is applied to the stator windings, a magnetic field is created. The rotor, either through the use of brushes and a commutator or electronic commutation, aligns itself with the magnetic field and begins to rotate. The direction of the current in the rotor windings is continuously reversed to ensure continuous rotation. The speed of a DC motor can be controlled by adjusting the voltage applied to the motor or by using electronic speed control methods.
Differences:
The main differences between AC motors and DC motors are as follows:
- Power Source: AC motors operate on alternating current, which is the standard power supply in most residential and commercial buildings. DC motors, on the other hand, require direct current and typically require a power supply that converts AC to DC.
- Construction: AC motors and DC motors have similar construction with stators and rotors, but the design and arrangement of the windings differ. AC motors generally have three-phase windings, while DC motors can have either armature windings or permanent magnets.
- Speed Control: AC motors typically operate at fixed speeds determined by the frequency of the power supply and the number of poles. DC motors, on the other hand, offer more flexibility in speed control and can be easily adjusted over a wide range of speeds.
- Efficiency: AC motors are generally more efficient than DC motors. AC motors can achieve higher power densities and are often more suitable for high-power applications. DC motors, however, offer better speed control and are commonly used in applications that require precise speed regulation.
- Applications: AC motors are widely used in applications such as industrial machinery, HVAC systems, pumps, and compressors. DC motors find applications in robotics, electric vehicles, computer disk drives, and small appliances.
In conclusion, AC motors and DC motors differ in their power source, construction, speed control, efficiency, and applications. AC motors rely on the interaction of magnetic fields and operate on alternating current, while DC motors use commutation and operate on direct current. Each type of motor has its advantages and is suited for different applications based on factors such as power requirements, speed control needs, and efficiency considerations.
editor by CX 2024-04-24
China wholesaler Three Phase AC Asynchronous Marine Gearbox Electric Motor Price for Wholesale vacuum pump distributors
Product Description
3 phase ac asynchronous marine gearbox electric motor price for wholesale
Application of electric motor
Electric motors are used in a wide variety of applications, including:
- Home appliances: Electric motors are used in home appliances such as refrigerators, washing machines, and vacuum cleaners.
- Power tools: Electric motors are used in power tools such as drills, saws, and sanders.
- Machine tools: Electric motors are used in machine tools such as lathes, milling machines, and grinders.
- Transportation: Electric motors are used in transportation vehicles such as cars, buses, and trains.
- Industry: Electric motors are used in industry for a variety of applications such as conveyor belts, hoists, and elevators.
- Medical devices: Electric motors are used in medical devices such as X-ray machines, MRI machines, and pacemakers.
- Other: Electric motors are also used in a variety of other applications such as wind turbines, robotics, and telecommunications.
Here are some specific applications of electric motors:
- Wind turbines: Electric motors are used in wind turbines to convert the kinetic energy of the wind into electrical energy.
- Robotics: Electric motors are used in robotics to provide motion and control.
- Electric vehicles: Electric motors are used in electric vehicles to power the wheels.
- Machine tools: Electric motors are used in machine tools to power the cutting tools.
- Conveyor belts: Electric motors are used in conveyor belts to move materials from 1 place to another.
- Elevators: Electric motors are used in elevators to raise and lower people and objects.
- Air conditioners: Electric motors are used in air conditioners to move the refrigerant through the system.
- Refrigerators: Electric motors are used in refrigerators to move the refrigerant through the system and to power the compressor.
- Vacuum cleaners: Electric motors are used in vacuum cleaners to power the brush roll and the fan.
- Drills: Electric motors are used in drills to spin the drill bit.
- Saws: Electric motors are used in saws to spin the saw blade.
- Sanders: Electric motors are used in sanders to spin the sanding disk.
- Other: Electric motors are used in a variety of other applications, such as toys, appliances, and medical devices.
Electric motors are a versatile and reliable component that can be used in a wide variety of applications. They offer a number of advantages, including:
- Efficiency: Electric motors are very efficient, converting up to 90% of the electrical energy they receive into mechanical energy.
- Versatility: Electric motors can be used in a wide variety of applications.
- Reliable: Electric motors are very reliable and have a long lifespan.
- Cost-effective: Electric motors are a cost-effective way to power a variety of devices.
Overall, electric motors are a valuable component that can be used in a wide variety of applications. They offer a number of advantages, including efficiency, versatility, reliability, and cost-effectiveness.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Universal, Industrial, Household Appliances, Car, Power Tools |
|---|---|
| Operating Speed: | High Speed |
| Excitation Mode: | – |
| Function: | Control, Driving |
| Casing Protection: | – |
| Number of Poles: | 2 |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
Can AC motors be used in both residential and commercial settings?
Yes, AC motors can be used in both residential and commercial settings. The versatility and wide range of applications of AC motors make them suitable for various environments and purposes.
In residential settings, AC motors are commonly found in household appliances such as refrigerators, air conditioners, washing machines, fans, and pumps. These motors are designed to meet the specific requirements of residential applications, providing reliable and efficient operation for everyday tasks. For example, air conditioners utilize AC motors to drive the compressor and fan, while washing machines use AC motors for agitating and spinning the drum.
In commercial settings, AC motors are extensively used in a wide range of applications across different industries. They power machinery, equipment, and systems that are crucial for commercial operations. Some common examples include:
- Industrial machinery and manufacturing equipment: AC motors drive conveyor belts, pumps, compressors, mixers, fans, blowers, and other machinery used in manufacturing, production, and processing facilities.
- HVAC systems: AC motors are used in commercial heating, ventilation, and air conditioning (HVAC) systems to drive fans, blowers, and pumps for air circulation, cooling, and heating.
- Commercial refrigeration: AC motors are utilized in commercial refrigeration systems for powering compressors, condenser fans, and evaporator fans in supermarkets, restaurants, and cold storage facilities.
- Office equipment: AC motors are present in various office equipment such as printers, photocopiers, scanners, and ventilation systems, ensuring their proper functioning.
- Transportation: AC motors are used in electric vehicles, trams, trains, and other forms of electric transportation systems, providing the necessary propulsion.
- Water and wastewater treatment: AC motors power pumps, mixers, and blowers in water treatment plants, wastewater treatment plants, and pumping stations.
The adaptability, efficiency, and controllability of AC motors make them suitable for a wide range of residential and commercial applications. Whether it’s powering household appliances or driving industrial machinery, AC motors play a vital role in meeting the diverse needs of both residential and commercial settings.
What are the common signs of AC motor failure, and how can they be addressed?
AC motor failure can lead to disruptions in various industrial and commercial applications. Recognizing the common signs of motor failure is crucial for timely intervention and preventing further damage. Here are some typical signs of AC motor failure and potential ways to address them:
- Excessive Heat: Excessive heat is a common indicator of motor failure. If a motor feels excessively hot to the touch or emits a burning smell, it could signify issues such as overloaded windings, poor ventilation, or bearing problems. To address this, first, ensure that the motor is properly sized for the application. Check for obstructions around the motor that may be impeding airflow and causing overheating. Clean or replace dirty or clogged ventilation systems. If the issue persists, consult a qualified technician to inspect the motor windings and bearings and make any necessary repairs or replacements.
- Abnormal Noise or Vibration: Unusual noises or vibrations coming from an AC motor can indicate various problems. Excessive noise may be caused by loose or damaged components, misaligned shafts, or worn bearings. Excessive vibration can result from imbalanced rotors, misalignment, or worn-out motor parts. Addressing these issues involves inspecting and adjusting motor components, ensuring proper alignment, and replacing damaged or worn-out parts. Regular maintenance, including lubrication of bearings, can help prevent excessive noise and vibration and extend the motor’s lifespan.
- Intermittent Operation: Intermittent motor operation, where the motor starts and stops unexpectedly or fails to start consistently, can be a sign of motor failure. This can be caused by issues such as faulty wiring connections, damaged or worn motor brushes, or problems with the motor’s control circuitry. Check for loose or damaged wiring connections and make any necessary repairs. Inspect and replace worn or damaged motor brushes. If the motor still exhibits intermittent operation, it may require professional troubleshooting and repair by a qualified technician.
- Overheating or Tripping of Circuit Breakers: If an AC motor consistently causes circuit breakers to trip or if it repeatedly overheats, it indicates a problem that needs attention. Possible causes include high starting currents, excessive loads, or insulation breakdown. Verify that the motor is not overloaded and that the load is within the motor’s rated capacity. Check the motor’s insulation resistance to ensure it is within acceptable limits. If these measures do not resolve the issue, consult a professional to assess the motor and its electrical connections for any faults or insulation breakdown that may require repair or replacement.
- Decreased Performance or Efficiency: A decline in motor performance or efficiency can be an indication of impending failure. This may manifest as reduced speed, decreased torque, increased energy consumption, or inadequate power output. Factors contributing to decreased performance can include worn bearings, damaged windings, or deteriorated insulation. Regular maintenance, including lubrication and cleaning, can help prevent these issues. If performance continues to decline, consult a qualified technician to inspect the motor and perform any necessary repairs or replacements.
- Inoperative Motor: If an AC motor fails to operate entirely, there may be an issue with the power supply, control circuitry, or internal motor components. Check the power supply and connections for any faults or interruptions. Inspect control circuitry, such as motor starters or contactors, for any damage or malfunction. If no external faults are found, it may be necessary to dismantle the motor and inspect internal components, such as windings or brushes, for any faults or failures that require repair or replacement.
It’s important to note that motor failure causes can vary depending on factors such as motor type, operating conditions, and maintenance practices. Regular motor maintenance, including inspections, lubrication, and cleaning, is essential for early detection of potential failure signs and for addressing issues promptly. When in doubt, it is advisable to consult a qualified electrician, motor technician, or manufacturer’s guidelines for appropriate troubleshooting and repair procedures specific to the motor model and application.
Can you explain the basic working principle of an AC motor?
An AC motor operates based on the principles of electromagnetic induction. It converts electrical energy into mechanical energy through the interaction of magnetic fields. The basic working principle of an AC motor involves the following steps:
- The AC motor consists of two main components: the stator and the rotor. The stator is the stationary part of the motor and contains the stator windings. The rotor is the rotating part of the motor and is connected to a shaft.
- When an alternating current (AC) is supplied to the stator windings, it creates a changing magnetic field.
- The changing magnetic field induces a voltage in the rotor windings, which are either short-circuited conductive bars or coils.
- The induced voltage in the rotor windings creates a magnetic field in the rotor.
- The magnetic field of the rotor interacts with the rotating magnetic field of the stator, resulting in a torque force.
- The torque force causes the rotor to rotate, transferring mechanical energy to the connected shaft.
- The rotation of the rotor continues as long as the AC power supply is provided to the stator windings.
This basic working principle is applicable to various types of AC motors, including induction motors and synchronous motors. However, the specific construction and design of the motor may vary depending on the type and intended application.
editor by CX 2024-04-23
China Hot selling Good Price Household Garage Electric Door AC Motor vacuum pump diy
Product Description
Product Description
| Specification | |
| item No. | JCA35 |
| Rated Torque(N.M) | 10 |
| Rated Speed(rpm) | 17 |
| Rated Voltage(V) | AC230 50Hz |
| Rated Power(W) | 146 |
| Rated Current(A) | 0.64 |
| Max Number of Turns(Turn) | 38 |
| Weight(Kg) | 1.4 |
| Length(mm) | 493 |
Company Profile
DRIVE A BETTER AND HIGH-QUALITY LIFE
Jiecang is committed to becoming the world’s leading provider of linear drive solutions, creating smart and healthy emerging
technologies to help partners succeed and drive a better and high-quality life.
FAQ
Q:What is the shipping port?
A:ZheJiang or HangZhou Port.
Q:How can I get the quotation?
A:You need to send up information, we will let our regional sales to contact with you, and the details you should to give: email
address, telephone number, material, size, input, Load capacity, quantity, color, speed or frequency, etc.
Q:May I have a sample order before bulk one?
A:Of course, we can provide a sample for you.
Q:Do you get the relevant certifications?
A:Yes, so far, we have got certification of CE,TUV, UL, PSE, KC, SAA, ROSH,ISO9001:2015,ISO14001:2015,OHSAS18001:2007 and so on.
| Application: | Curtain |
|---|---|
| Speed: | Constant Speed |
| Number of Stator: | Single-Phase |
| Function: | Control |
| Casing Protection: | Closed Type |
| Number of Poles: | 2 |
| Samples: |
US$ 59/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Are there environmental considerations associated with the use of AC motors?
Yes, there are several environmental considerations associated with the use of AC motors. These considerations are primarily related to energy consumption, greenhouse gas emissions, and the disposal of motors at the end of their life cycle. Let’s explore these environmental considerations in detail:
- Energy Efficiency: AC motors can have varying levels of energy efficiency, which directly impacts their environmental impact. Motors with higher efficiency convert a larger percentage of electrical energy into useful mechanical work, resulting in reduced energy consumption. By selecting and using high-efficiency AC motors, energy usage can be minimized, leading to lower greenhouse gas emissions and reduced reliance on fossil fuels for electricity generation.
- Greenhouse Gas Emissions: The electricity consumed by AC motors is often produced by power plants that burn fossil fuels, such as coal, natural gas, or oil. The generation of electricity from these fossil fuels releases greenhouse gases, contributing to climate change. By employing energy-efficient motors and optimizing motor systems, businesses and individuals can reduce their electricity demand, leading to lower greenhouse gas emissions and a smaller carbon footprint.
- Motor Disposal and Recycling: AC motors contain various materials, including metals, plastics, and electrical components. At the end of their life cycle, proper disposal or recycling is important to minimize their environmental impact. Some components, such as copper windings and steel casings, can be recycled, reducing the need for new raw materials and energy-intensive manufacturing processes. It is crucial to follow local regulations and guidelines for the disposal and recycling of motors to prevent environmental pollution and promote resource conservation.
- Manufacturing and Production: The manufacturing and production processes associated with AC motors can have environmental implications. The extraction and processing of raw materials, such as metals and plastics, can result in habitat destruction, energy consumption, and greenhouse gas emissions. Additionally, the manufacturing processes themselves can generate waste and pollutants. Motor manufacturers can mitigate these environmental impacts by adopting sustainable practices, using recycled materials, reducing waste generation, and implementing energy-efficient production methods.
- Life Cycle Assessment: Conducting a life cycle assessment (LCA) of AC motors can provide a holistic view of their environmental impact. An LCA considers the environmental aspects associated with the entire life cycle of the motor, including raw material extraction, manufacturing, transportation, use, and end-of-life disposal or recycling. By analyzing the different stages of the motor’s life cycle, stakeholders can identify opportunities for improvement, such as optimizing energy efficiency, reducing emissions, and implementing sustainable practices.
To address these environmental considerations, governments, organizations, and industry standards bodies have developed regulations and guidelines to promote energy efficiency and reduce the environmental impact of AC motors. These include efficiency standards, labeling programs, and incentives for the use of high-efficiency motors. Additionally, initiatives promoting motor system optimization, such as proper motor sizing, maintenance, and control, can further enhance energy efficiency and minimize environmental impact.
In summary, the environmental considerations associated with the use of AC motors include energy efficiency, greenhouse gas emissions, motor disposal and recycling, manufacturing processes, and life cycle assessment. By prioritizing energy efficiency, proper disposal, recycling, and sustainable manufacturing practices, the environmental impact of AC motors can be minimized, contributing to a more sustainable and environmentally conscious approach to motor usage.
Can AC motors be used in renewable energy systems, such as wind turbines?
Yes, AC motors can be used in renewable energy systems, including wind turbines. In fact, AC motors are commonly employed in various applications within wind turbines due to their numerous advantages. Here’s a detailed explanation:
1. Generator: In a wind turbine system, the AC motor often functions as a generator. As the wind turbine blades rotate, they drive the rotor of the generator, which converts the mechanical energy of the wind into electrical energy. AC generators are commonly used in wind turbines due to their efficiency, reliability, and compatibility with power grid systems.
2. Variable Speed Control: AC motors offer the advantage of variable speed control, which is crucial for wind turbines. The wind speed is variable, and in order to maximize energy capture, the rotor speed needs to be adjusted accordingly. AC motors, when used as generators, can adjust their rotational speed with the changing wind conditions by modifying the frequency and voltage of the output electrical signal.
3. Efficiency: AC motors are known for their high efficiency, which is an important factor in renewable energy systems. Wind turbines aim to convert as much of the wind energy into electrical energy as possible. AC motors, especially those designed for high efficiency, can help maximize the overall energy conversion efficiency of the wind turbine system.
4. Grid Integration: AC motors are well-suited for grid integration in renewable energy systems. The electrical output from the AC generator can be easily synchronized with the grid frequency and voltage, allowing for seamless integration of the wind turbine system with the existing power grid infrastructure. This facilitates the efficient distribution of the generated electricity to consumers.
5. Control and Monitoring: AC motors offer advanced control and monitoring capabilities, which are essential for wind turbine systems. The electrical parameters, such as voltage, frequency, and power output, can be easily monitored and controlled in AC motor-based generators. This allows for real-time monitoring of the wind turbine performance, fault detection, and optimization of the power generation process.
6. Availability and Standardization: AC motors are widely available in various sizes and power ratings, making them readily accessible for wind turbine applications. They are also well-standardized, ensuring compatibility with other system components and facilitating maintenance, repair, and replacement activities.
It’s worth noting that while AC motors are commonly used in wind turbines, there are other types of generators and motor technologies utilized in specific wind turbine designs, such as permanent magnet synchronous generators (PMSGs) or doubly-fed induction generators (DFIGs). These alternatives offer their own advantages and may be preferred in certain wind turbine configurations.
In summary, AC motors can indeed be used in renewable energy systems, including wind turbines. Their efficiency, variable speed control, grid integration capabilities, and advanced control features make them a suitable choice for converting wind energy into electrical energy in a reliable and efficient manner.
How does the speed control mechanism work in AC motors?
The speed control mechanism in AC motors varies depending on the type of motor. Here, we will discuss the speed control methods used in two common types of AC motors: induction motors and synchronous motors.
Speed Control in Induction Motors:
Induction motors are typically designed to operate at a constant speed determined by the frequency of the AC power supply and the number of motor poles. However, there are several methods for controlling the speed of induction motors:
- Varying the Frequency: By varying the frequency of the AC power supply, the speed of an induction motor can be adjusted. This method is known as variable frequency drive (VFD) control. VFDs convert the incoming AC power supply into a variable frequency and voltage output, allowing precise control of motor speed. This method is commonly used in industrial applications where speed control is crucial, such as conveyors, pumps, and fans.
- Changing the Number of Stator Poles: The speed of an induction motor is inversely proportional to the number of stator poles. By changing the connections of the stator windings or using a motor with a different pole configuration, the speed can be adjusted. However, this method is less commonly used and is typically employed in specialized applications.
- Adding External Resistance: In some cases, external resistance can be added to the rotor circuit of an induction motor to control its speed. This method, known as rotor resistance control, involves inserting resistors in series with the rotor windings. By varying the resistance, the rotor current and torque can be adjusted, resulting in speed control. However, this method is less efficient and is mainly used in specific applications where precise control is not required.
Speed Control in Synchronous Motors:
Synchronous motors offer more precise speed control compared to induction motors due to their inherent synchronous operation. The following methods are commonly used for speed control in synchronous motors:
- Adjusting the AC Power Frequency: Similar to induction motors, changing the frequency of the AC power supply can control the speed of synchronous motors. By adjusting the power frequency, the synchronous speed of the motor can be altered. This method is often used in applications where precise speed control is required, such as industrial machinery and processes.
- Using a Variable Frequency Drive: Variable frequency drives (VFDs) can also be used to control the speed of synchronous motors. By converting the incoming AC power supply into a variable frequency and voltage output, VFDs can adjust the motor speed with high accuracy and efficiency.
- DC Field Control: In some synchronous motors, the rotor field is supplied by a direct current (DC) source, allowing for precise control over the motor’s speed. By adjusting the DC field current, the magnetic field strength and speed of the motor can be controlled. This method is commonly used in applications that require fine-tuned speed control, such as industrial processes and high-performance machinery.
These methods provide different ways to control the speed of AC motors, allowing for flexibility and adaptability in various applications. The choice of speed control mechanism depends on factors such as the motor type, desired speed range, accuracy requirements, efficiency considerations, and cost constraints.
editor by CX 2023-12-06
in Malegaon India sales price shop near me near me shop factory supplier Ye3 Ce CCC IEC Ie3 Premium Efficiency Three Phase AC Induction High Speed Electric Motor for Fan Pump Blower Compressor Conveyor Mixer Ye3-315L1-2 160kw 2985kw manufacturer best Cost Custom Cheap wholesaler
The new items consist of a series of substantial-tech and substantial good quality chains and sprockets and gears, this kind of as chains and gearboxes for agricultural machineries, metallurgical chains, escalator action-chains, substantial-velocity tooth chains, timing chains, self-lubrication chains, among which have variety large pace tooth chain for automobile department dynamic box and aerial chains fill in the blanks of chain in China. We are aiming to fulfill the calls for of the clientele all around the entire world.. We offer you OEM services.
YE3 CE CCC IEC IE3 Premium Effectiveness A few Stage AC Induction EPT Pace Electric powered EPT for supporter pump blower compressor conveyor mixer
———————————————————————————————
Overview
Our organization has investigated and deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ed total series vertical motor for multistage pump, which conforms to the stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd of IEC Degree three (YE3 Sequence) and Power Efficiency Level 2(YXL and YX3 Sequence). The exterior of the motor manages to get the Design Patent granted by Condition Mental Home Business office of the People’s Republic of EPTT. This series of motor has been productively utilised in many domestic multistage pump manufacturing EPTTrprises, as well exported to different areas as European EPT, Japan and EPTTiwan.
EPTT Description
- Frame sizes: 71 to 315
- Rated output: .37 to 220kW
- Voltage: 380V or other
- Frequency: 50Hz or sixty Hz
- Obligation Cycle: S1
- Insulation class: F
- Degree of security: IP55
- Quantity of poles: two
- Efficiency stages: IE2 /IE3
- Enclosure: IC411
Features
- Classy Physical appearance, reduced sound in start off and procedure, satisfy the requirement of bi-aXiHu (West EPT) Dis.al pressure.
- Installation dimension and Power Efficiency conform strictly to the stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd of IEC and DIN42673, cooling technique IC411.
- Security Course IP55cast iron frame avert the motor from dust and splash ideal construction in compliance with global stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd, secure in operation.
- Insulation Course F, robust warmth resistance and EPT resistance, EPTT life span of insulation, be in a position to perform in significant surroundings.
- StXiHu (West EPT) Dis.Hu (West EPT) Dis.rdization design and style, high high quality content,EPTd processing gear and perfect top quality assurance system, substantial power preserving,little vibration,lower sounds,constant functionality and trustworthy.
Application
Used with the multistage pump, the motor’s wide application ranges in the provide drinking water pressurizing of large constructing, drinking water shipping and delivery in EPTT distance or in the scenario when the strain enhance by big pressure tools is necessary, meeting the need of living water source of household locations,big architectural intricate(like faculty,army,massive manufacturing unit and so on.) and villa-cluster the motor can also be applied in the EPT system of air-conditioner and EPT-combating supercharging of industrial developing complicated in pressurizing of waterworks from EPTT length or be utilised to suction clean h2o from building site.
Display Space
Certificates
Quality Support
EPTT EPTT
EPT EPT Creation Workshop and Stream Chart
Certificates and far more Organization information make sure you go to quotABOUT US quot
—————————————————————————————————————————
Welcome to get in touch with us immediately…
https://youtu.be/frVvg3yQqNM
WANNAN EPT EPTT EPTS
in Busto Arsizio Italy sales price shop near me near me shop factory supplier 21320 Spherical Roller Bearing Electric Pallet Truck Double Lift Fork Mining Bearing Metal Connections Piston Compressors Bearing Concrete Auto Motor Bearing manufacturer best Cost Custom Cheap wholesaler
The team has taken component in the producing and revising of ISO/TC100 intercontinental chain standard a number of years in achievement and hosted the 16th ISO/TC100 Global annual meeting in 2004. With a lot of years’ encounter in these lines, we have been distinguished from other suppliers in China by our benefits in aggressive pricing, on-time shipping and delivery, prompt responses, on-hand engineering assist and great after-sales companies. There is a complex centre of province stage, EPG academician operating station, experiment station for EPG put up medical professionals, and countrywide 863 software set up in EPG group. With these platforms and powerful technological capacity, the far more than 400 professionals have designed all range of special higher exact and substantial power items, conducted mildew plans for important elements in the auto and countrywide sector revitalizing software, resulting more than 5000 developed in excess of, amid which 33 products are autonomous patent technology with 4 patent accepted .
Description of the bearing:
one)The self-aligning ball bearing are created of an interior ring, an out ring, two rows of balls, and a cage. Typically the outer ring of the bearing has a sphered raceway.
two) This variety of bearing is consequently self-aligning and insensitive to angular misalignments of the shaft relative to the housing.
3) The self-aligning ball bearing is notably suited for apps where appreciable shaft deflections or misalignment are to be anticipated.
4)The interior ring of the self-aligning ball bearing are usually cylindrical, and occasionally are EPTTr ring, which has the sufix of quotk quot
5)Cage of the bearing: poEPTTmide cage, metal cage.
6)sufix of the bearing:
M EPTTd brass cage, ball centred
2RS1 Sheet steel reinforced contact seal of acrylonitrile-butadiene rubber (NBR) on equally sides of the bearing
TN Injection moulded snap-sort cage of poEPTTmide sixty six, ball centred
TN9 Injection moulded snap-type cage of EPT fibre reinforced poEPTTmide 66, ball centred
Poduct Attributes:
– Self aligning potential.
– Two types of interior bore, cylindrical bore and EPTTr bore
– Spherical raceway on the outer ring
– Wide employed
– Low frication
Software:
The self-aligning ball bearing can be utilised in a lot of different spots, this kind of as:
EPT, EPTT market and EPT EPTTry, Tractor, EPT EPTTry, House EPT, metallurgy, mining EPTTry and so on.
TianEPTT EPTT EPTT can source you with the broadest achievable array of bearings. In addition to Ball bearing, Roller bearing, Needle bearing, EPT Blocks, we manufacture Flange blocks, Rolling mill bearing, Slide bearing and EPT bearing. Our unpXiHu (West EPT) Dis.Hu (West EPT) Dis.leled expertise as a complete maker and exporter for these EPTT is vital for the deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment and application of a EPT product line for all EPTT EPTT.
We pride ourselves on our ability to serve every client, from yard mechanics, to independent store proprietors, to automotive specialists, to massive producing EPTTs. Our EPTTrget EPTT served are EPTT EPT, EPTTs, Electric EPTs, EPTTes, EPT EPT, EPTT EPTTry, EPTT Tools, EPTs, RailwaEPTTand EPT, Robotics, and goods for EPT EPTTry. TianEPTT EPTT EPTT is a stronger and growing exporter of bearing in EPTT.
In addition to producing commodity-primarily based bearing products, EPTT EPTT tends to make custom bearing options for OEM. TianEPTT EPTT bearing has stringent quality manage stXiHu (West EPT) Dis.Hu (West EPT) Dis.rds and maintains full manage over offer, utilizing only the maximum grade bearing steel.
Our mission is to totally give for you. Effectively into our much more than Ten many years of organization, we are self-assured that you are going to uncover what you’re searching for in bearing solution listed here. Remember to phone, e mail, or stop by for far more data.
We are really confident in our items, and we are certain that we can make your EPTT!
Q: What the MOQ of your firm?
A: In inventory, MOQ is 1pc.
Q: Could you accept OEM and customize?
A: Of course, we can customize for you according to sample or drawing.
Q: Could you source sample for totally free?
A: Indeed, we can offer sample for totally free, you only want to shell out for the shipping and delivery EPT.
Q: Is you organization factory or EPT EPTT?
A: We have our own manufacturing facility, our kind is manufacturing facility trade.
Q: Could you notify me the content of your bearing?
A: We have chrome steel, carbon metal, stainless metal and ceramic.
Q: Could you provide door to doorway provider?
A: Yes, by categorical (DHL, FEDEX, TNT, EMS) 4-ten daEPTTto your city.
Q: What is your organization payment conditions?
A: T/T. Western EPT, PayPal
Q: Could you tell me the delivery time of your goods?
A: If inventory, in seven daEPTTor foundation on your orEPTTquantity.
Dear good friend, if you have any inquiries, get in touch with us you should.
in Nasiriyah Iraq sales price shop near me near me shop factory supplier Low speed 180-250mA beauty equipment gear DC electric motor manufacturer best Cost Custom Cheap wholesaler
Owing to our broad item assortment and prosperous encounters in this market, The large specific CNC tools, these kinds of as Slow-feeding wire-cut machine, jig grinding device and electric discharge equipment, guarantees the leading good quality precision of mould processing, with the high productive and environmental security acid rolling line currently being the greatest raw substance changing products in the field in china The wildly use of automated milling equipment, higher-pace computerized feeding punch, substantial velocity automated rolling and assembling machine ensures the high good quality and effectiveness of factors and chain producing. Good quality and credit rating are the bases that make a corporation alive.
Minimal velocity one hundred eighty-250mA beauty products EPT dc electrical motor
Principal Features
one.OEM/ODM 48mm twin shaft EPTT furthermore five hundred amp528 amp3530 and 3540 dc motor
2.Tiny dimension dc EPT motor with minimal pace and huge torque
three.48mm EPT motor offer one.0Nm torque and far more dependable
four.Suited to modest diameter, reduced noise and large torque software
5.DC EPT motor can match encoder,11ppr
six.Reduction ratio:88.five,128,225,283,360,453
| EPT design no. | Rated voltage | No-load pace | No-load present | Rated speed | Rated torque | Rated recent | Output EPTT | Stall torque | Stall recent |
| VDC | r/min | mA | r/min | g.cm | mA | W | g.cm | A | |
| TRK-3530-1240 | 12 | 4000 | 35 | 3300 | forty | one hundred eighty | one.four | 220 | one. |
| TRK-3530-1250 | 12 | 5000 | 45 | 4200 | forty | 250 | one.eight | 250 | 1.two |
| TRK-3530-2460 | 24 | 6000 | 30 | 5300 | fifty | one hundred eighty | three.one | 400 | one.three |
EPT motor technical knowledge : GM48-3530-1240-XXX
| Reduction ratio | 88.5 | 128 | 225 | 283 | 360 | 453 |
| Length mm | 12.five | twelve.5 | twelve.5 | twelve.five | twelve.5 | 12.five |
| No-load speed rpm | 45 | 30 | 18 | 14 | twelve | nine |
| Rated pace rpm | 37 | 25 | fourteen | 12 | nine | seven |
| Rated torque kg.cm | two | three | 4 | five | six | 6 |
| Max.momentary tolerance torque kg.cm | 5 | five | five | 10 | 10 | 10 |
EPT motor specialized knowledge : GM48-3530-1250-XXX
| Reduction ratio | 88.five | 128 | 225 | 283 | 360 | 453 |
| Length mm | twelve.five | 12.5 | 12.5 | twelve.five | twelve.5 | 12.5 |
| No-load velocity rpm | forty seven | 32 | eighteen | 15 | 11 | 9 |
| Rated velocity rpm | 32 | twenty five | sixteen | 10 | 8 | seven |
| Rated torque kg.cm | 2 | 3 | 4 | 5 | 6 | eight |
| Max.momentary tolerance torque kg.cm | five | 5 | 8 | ten | ten | ten |
EPT motor technical information : GM48-3530-2460-XXX
| Reduction ratio | 88.5 | 128 | 225 | 283 | 360 | 453 |
| Duration mm | twelve.five | 12.five | twelve.5 | 12.5 | twelve.five | 12.5 |
| No-load pace rpm | 68 | 47 | 26 | 21 | 16 | 13 |
| Rated speed rpm | 60 | 41 | 24 | 18 | fourteen | 11 |
| Rated torque kg.cm | 2.five | 3.five | five | 5 | 8 | ten |
| Max.momentary tolerance torque kg.cm | 5 | 5 | 10 | ten | 12 | fifteen |
Solution Software
| Other Applications: | |
| Enterprise EPTTs: | ATM, Copiers and Scanners, Forex EPT, Position of Sale, Printers, Vending EPTTs. |
| Meals and EPTTrage: | EPTTrage Dispensing, Hand Blenders, Blenders, Mixers, Coffee EPTTs, Foods Processors, Juicers, Fryers, Ice Makers, Soy Bean Milk Makers. |
| Property EPTTrtainment and Gaming: | Gaming EPTTs, Movie Online games, EPTal Disk Drives, RC and EPTT Toys. |
| Home EPTnologies: | House EPT, Air Purifiers and Dehumidifiers, Range Hoods, Washers and Dryers, Fridges, Dishwashers, EPTr Care, Whirlpool and Spa, Showers, EPT Metering, Coffee EPTTs. |
| Garden and XiHu (West EPT) Dis.Hu (West EPT) Dis.den: | Lawn Mowers, Snow Blowers, Trimmers, Leaf Blowers. |
| Private Care: | Hair Reducing, Hair Care, Massagers. |
| EPTT Equipment: | Drills and Motorists, Sanders, Grinders, PoEPTTrs, Saws. |
| Camera and EPTal: | Movie, Cameras, Projectors. |
Associated EPT
Certifications
Our EPTT
TT EPT (HK) EPTT EPTT, Ltd has been EPTTizing in micro motors, EPT motors and their respective elements because 2000.
Our items are commonly used in EPTTrtainment techniques, cars, house and EPTT EPTs and instruments and a lot of other people. Our items are dependable and EPTT-long lasting, and backed by many years of encounter. We export ninety eight% of our output worldwide.
By EPTaging our challenging-gained track record for honesty, dependability and good quality, TT EPT aims to carry on as a pioneer in the sales overEPTT by looking for EPTT associates. If your firm is an end-user of micro-motors, a distributor or an agent, please make contact with us. We look EPTT to being in a position to function collectively with you in the around EPT.
EPTT
EPTT amp Shipping and delivery
EPTT: solitary carton EPTT, 100 items per box.
EPT time:
DHL: 3-five doing work daEPTT
UPS: 5-seven operating times
TNT: 5-7 operating times
FedEx: seven-nine doing work times
EMS: twelve-15 doing work times
By Sea: Relies upon on which place
FAQ
Q: How to order?
A: send us inquiry #8594 EPT our quotation #8594 negotiate details #8594 affirm the sample #8594 indicator deal/deposit #8594 mass manufacturing #8594 cargo all set #8594 harmony/shipping and delivery #8594 further cooperation.
Q: How about Sample order?
A: Sample is accessible for you. remember to speak to us for specifics. Speak to us
Q: Which shipping way is avaliable?
A: DHL, UPS, FedEx, TNT, EMS, EPTT Publish,Sea are obtainable.The other transport waEPTTare also obtainable, please speak to us if you require ship by the other shipping way.
Q: How EPTT is the provide?
A: Devliver time relies upon on the quantity you get. normally it will take 15-twenty five operating days.
Q: My deal has missing merchandise. What can I do?
A: Remember to contact our assist crew and we will confirm your orEPTTwith the package deal contents.We apologize for any inconveniences.
Q: How to verify the payment?
A: We accept payment by T/T, PayPal, the other payment waEPTTalso could be approved,You should speak to us ahead of you spend by the other payment methods. Also thirty-50% deposit is obtainable, the equilibrium money should be compensated just before shipping.
in Tehran Iran (Islamic Republic of) sales price shop near me near me shop factory supplier 3V 6V four-wheel car gear electric high torque DC motor manufacturer best Cost Custom Cheap wholesaler
specialize in electrical power transmission merchandise, CATV items, mechanical seal, hydraulic and Pheumatic, and marketing goods. EPG has been efficiently certified by ISO9002 Top quality Administration System, ISO9001 Top quality Administration Technique, API certificate, ISO/TS16949:2002 and ISO10012 measurement administration program. The new merchandise contain a series of substantial-tech and higher top quality chains and sprockets and gears, such as chains and gearboxes for agricultural machineries, metallurgical chains, escalator step-chains, higher-velocity tooth chains, timing chains, self-lubrication chains, amid which have variety high speed tooth chain for car branch dynamic box and aerial chains fill in the blanks of chain in China. 3v 6v 4-wheel vehicle EPT electric powered higher torque dc motor
Main Features
1 periodOEM solODM TGP plastic EPTs EPTT plus A130 permanet magnet DC motor
two periodSmall dimensions dc EPT motor with lower pace and big torque
3 periodSuitable to small diameter comma minimal sounds and big torque software
4 periodReduction ratio colon48 comma120 comma180 comma220 comma288
| Model colon EPT TGP01D-A130 | ||
|
TFE-130RA-12215 |
Rated voltage colon 6VDC | Stall torque colon20g periodcm |
| No-load velocity colon11500r solmin | Stall current colon0 period85A | |
| No-load recent colon120mA | sol | |
|
TFE-130RA-14175 |
Rated voltage colon 3VDC | Stall torque colon13g periodcm |
| No-load existing colon8000r solmin | Stall existing colon0 period70A | |
| No-load current colon120mA | sol | |
|
TFE-130RA-18100 |
Rated voltage colon 3VDC | Stall torque colon20g periodcm |
| No-load speed colon11500r solmin | Stall current colon1 period80A | |
| No-load recent colon250mA | sol | |
EPT motor specialized data colon TGP01D-A130-12215-XXX
| Reduction ratio | forty eight | one hundred twenty | 180 | 220 | 288 |
| Size mm | |||||
| No-load pace rpm | 230 | 90 | 60 | fifty | 38 |
| Rated pace rpm | |||||
| Rated torque kg periodcm | |||||
| Max periodmomentary tolerance torque kg periodcm | period7 | one period4 | 2 period0 | two period2 | 2 period8 |
EPT motor technical information colon TGP01D-A130-14175-XXX
| Reduction ratio | forty eight | 120 | one hundred eighty | 220 | 288 |
| Duration mm | |||||
| No-load speed rpm | 150 | 60 | 40 | 33 | twenty five |
| Rated pace rpm | |||||
| Rated torque kg periodcm | |||||
| Max periodmomentary tolerance torque kg periodcm | period5 | period9 | 1 period2 | one period4 | 1 period8 |
EPT motor technical info colon TGP01D-A130-18100-XXX
| Reduction ratio | 48 | a hundred and twenty | 180 | 220 | 288 |
| Length mm | |||||
| No-load pace rpm | 230 | ninety | sixty | fifty | 38 |
| Rated velocity rpm | |||||
| Rated torque kg periodcm | |||||
| Max periodmomentary tolerance torque kg periodcm | period7 | 1 period4 | 2 period0 | 2 period2 | two period8 |
Solution Application
| Other Programs colon | |
| Enterprise EPTTs colon | ATM comma Copiers and Scanners comma Currency EPT comma Stage of Sale comma Printers comma Vending EPTTs time period |
| Food and EPTTrage colon | EPTTrage Dispensing comma Hand Blenders comma Blenders comma Mixers comma Coffee EPTTs comma Meals Processors comma Juicers comma Fryers comma Ice Makers comma Soy Bean Milk Makers period |
| Residence EPTTrtainment and Gaming colon | Gaming EPTTs comma Video clip Game titles comma EPTal Disk Drives comma RC and EPTT Toys interval |
| House EPTnologies colon | House EPT comma Air Purifiers and Dehumidifiers comma Assortment Hoods comma Washers and Dryers comma Refrigerators comma Dishwashers comma EPTr Care comma Whirlpool and Spa comma Showers comma EPT Metering comma Espresso EPTTs period of time |
| Garden and XiHu (West EPT) Dis.Hu (West EPT) Dis.den colon | Lawn Mowers comma Snow Blowers comma Trimmers comma Leaf Blowers period |
| Private Treatment colon | Hair Reducing comma Hair Care comma Massagers time period |
| EPTT Tools colon | Drills and Drivers comma Sanders comma Grinders comma PoEPTTrs comma Saws period |
| Digital camera and EPTal colon | Online video comma Cameras comma Projectors period |
EPTT amp Shipping
EPTT colon one carton EPTT comma one hundred parts for every box period of time
EPT time colon
DHL colon 3-5 operating daEPTT semi
UPS colon 5-seven functioning days semi
TNT colon 5-7 working days semi
FedEx colon seven-9 functioning times semi
EMS colon twelve-fifteen doing work days semi
EPTT Post colon Depends on ship to which region semi
Sea colon Depends on ship to which country
Our business
TT EPT lparHK rpar EPTT Co time period comma Ltd has been EPTTizing in micro motors comma EPT motors and their respective components because 2000 interval
Our goods are extensively utilized in EPTTrtainment methods comma vehicles comma home and EPTT EPTs and instruments and several others period of time Our items are reliable and EPTT-long lasting comma and backed by a long time of expertise interval We export ninety eight percnt of our output around the world interval
By EPTaging our tough-gained popularity for honesty comma dependability and high quality comma TT EPT aims to continue as a pioneer in the income overEPTT by looking for EPTT companions interval If your business is an end-consumer of micro-motors comma a distributor or an agent comma please contact us time period We seem EPTT to currently being able to work together with you in the near EPT time period
FAQ
Q colon How to purchase quest
A colon send out us inquiry rightEPT EPT our quotation rightEPT negotiate information rightEPT affirm the sample rightEPT indicator agreement soldeposit rightEPT mass manufacturing rightEPT cargo completely ready rightEPT equilibrium soldelivery rightEPT additional cooperation time period
Q colon How about Sample get quest
A colon Sample is obtainable for you interval remember to get in touch with us for information period Our internet site colonwww periodttmotor periodcom
Q colon Which transport way is avaliable quest
A colon DHL comma UPS comma FedEx comma TNT comma EMS comma EPTT Post commaSea are accessible periodThe other delivery waEPTTare also accessible comma make sure you speak to us if you want ship by the other delivery way time period
Q colon How EPTT is the produce quest
A colon Devliver time is dependent on the quantity you buy period of time generally it will take fifteen-twenty five doing work days period
Q colon My bundle has lacking items period of time What can I do quest
A colon You should get in touch with our support staff and we will verify your orEPTTwith the package deal contents periodWe apologize for any inconveniences period of time
Q colon How to affirm the payment quest
A colon We settle for payment by T solT comma PayPal comma the other payment waEPTTalso could be recognized commaPlease speak to us just before you pay out by the other payment techniques period of time Also thirty-fifty percnt deposit is offered comma the equilibrium income should be paid out before shipping and delivery interval