China supplier Silinman 6W-1.5kw Micro AC Gear Motor vacuum pump and compressor

Product Description

Technical Standard of Micro AC Gear Motor
Insulation resistance:under normal temperature normal humidity condition,at motor rated operation,use DC500V megger,measure the insulation resistance between the winding and casing, which should be above 100MΩ
Insulation voltage:under normal temperature normal humidity condition,at motor rated operation,apply a voltage 1.5KV(50hz/60hz) between winding and casing for 1 minute without any abnormalities.
Temperature rise:under normal load condition and rated operation, the temperature rise of the winding measured by the resistance method should be within 75K
Insulation level:F(130°C)
Overheat protection: can customize overheat protection device(automatic reset type),115°C automatic stop,85°C±15°C automatic reset
Ambient temperature:-10°C-40°C(No freezing)
Ambient humidity:below 85%(no condensation)


Micro AC Gear Motor=Micro AC Motor(Induction motor, reversible motor,torque motor)+Gearbox(Reducer)
Micro AC Motor type:
1)Induction motor, with working form,S1-continuous working;
2)Reversible motor, with working form S2-30min working;
3)Torque motor,

Motor Size:60mm,70mm,80mm,90mm,104mm,120mm
Motor Power:6w,10w,15w,25w,40w,60w,90w,120w,140w,180w,200w,250w,300w,370w,400w,750w,1.5kw
Motor Voltage:AC,1phase110v,1phase220v,1phase230v,3phase220v,3phase380v,3phase220v/380v,and other customized voltages
Motor Poles and Speed:4P,1400rpm/50Hz;1680rpm/60Hz(2P is available)
Motor accessories:electromagnetic brake,terminal box,thermally protection,fan
Output shaft:round shaft,gear shaft
Rotation direction:CW,CCW


Micro AC Motor with round shaft 


Micro AC Motor with gear shaft

AC motor description:

Micro AC Motor
Code Size Power Single phase Three phase 3 wires Three phase 6 wires Terminal junction box
Constant speed Speed regulation Thermally Brake Damping Thermally Brake Damping Thermally
Brake Damping Brake Damping
2 60mm 6w × × × × × × × × × × ×
3 70mm 15w ×
4 80mm 25w ×
40w ×
5 90mm 40w ×
60w ×
90w ×
120w ×
140w ×
180w ×
6 104mm 180w ×
200w ×
250w ×
300w ×
370w ×
7 120mm 400w ×
550w ×
750w ×

Gearbox description:
Gearbox type:GK,GS,90mm five-stage
Gearbox size:60mm,70mm,80mm,90mm,104mm,120mm
Gearbox ratio:2K-750K

Decimal middle gearbox:10X

Gear Reducer
Code Size 10X middle gearbox Normal type GK Gearbox
Output shaft/key width Ratio
2 stage transmission 3 stage transmission 4 stage transmission
2 60mm can customize round shaft Φ8/Φ10 Φ8 milling 7,                  Φ10 key 4 2k,2.5k,3k,3.6k,4k,5k,6k,7.5k,9k,10k,12.5k,15k, 18k 20k,25k,30k, 36k,40k 50k,60k,75k,80k,90k,100k,120k,150k,180k,200k,250k,300k
3 70mm can customize round shaft Φ10/Φ12 Φ10 key 4 2k,2.5k,3k,5k,6k,7.5k,9k,10k, 12.5k,15k,18k 20k,25k,30k, 36k,40k,50k 60k,75k,90k, 100k,120k,150k,180k,200k,250k
4 80mm can customize round shaft Φ10/Φ12 Φ10 key 4 2k,2.5k,3k,5k,6k,7.5k,9k,10k, 12.5k,15k,18k 20k,25k,30k, 36k,50k 60k,75k,90k, 100k,120k,150k,180k,250k,300k
5 90mm can customize round shaft Φ10/Φ12/ Φ15 Φ12 key 4       Φ15 key 5 2k,2.5k,3k,3.6k,5k,6k,7.5k,9k, 9.5k,10k, 12.5k 15k,18k,20k, 25k 30k,36k,50k,60k,75k,90k,100k, 120k,150k,180k,250k,300k,400k,500k,600k,750k
6 104mm can customize round shaft Φ12/ Φ15/Φ18 Φ15 key 5        Φ18 key 6 2k,2.5k,3k,3.6k,5k,6k,7.5k,9k, 9.5k,10k, 12.5k 15k,18k,20k, 25k,30k,36k, 50k 60k,75k,90k, 100k,120k,150k, 180k,250k,300k, 400k,500k,600k, 750k
7 120mm can customize round shaft Φ22/ Φ25 Φ22 key 6 2k,2.5k,3k,3.6k,5k,6k,7.5k,10k, 12.5k 15k,18k,20k, 25k,30k 40k,50k,60k,75k,90k,100k,120k,150k,180k,200k,250k

Gearbox description:
Gearbox type: Right Angle Gearbox(Hollow center, CHINAMFG output shaft ceneter, Hollow eccentric,Solid output shaft eccentric)
Gearbox size: 80mm,90mm,104mm,120mm
Gearbox ratio:2K-2250K

Right Angle Gear Reducer
Code Size Output shaft diameter Gear Ratio
Hollow Center Solid Center
Standard non-standard Standard non-standard
4 80mm Φ15 × Φ12 × 6k,7.5k,9k,15k,18k,23k,27k,30k, 37.5k,45k,54k,60k,75k,90k,108k, 150k,180k,225k,270k,300k, 360k,450k,540k,750k,900k
5 90mm Φ17 Φ15,Φ20 Φ15 × right angle center(spiral bevel gear)  right angle eccentric(worm gear)             2.5k,3k,3.6k,5k,6.25k,7.5k,9k, 12.5k,15k,18k,23k,25k,31k, 37.5k,45k,50k,62.5k,75k,90k, 125k,150k,188k,225k,250k, 300k,375k,450k,625k,750k, 1000k,1250k,1500k,1875k
6 104mm Φ22 Φ17,Φ20,     Φ24,Φ25 Φ22 Φ20 6k,7.5k,9k,15k,18k,23k,18k,30k,37.5k,45k,54k,60k,75k,90k,108k,150k, 180k,225k,270k,300k, 360k,450k,540k,750k,900k, 1200k, 1500k,1800k,2250k
7 120mm Φ30 Φ22,Φ20,     Φ28 Φ30 Φ22 6k,7.5k,9k,11k,15k,18k,23k,30k,37.5k,45k,54k,60k,75k,90k,120k,150k, 180k,225k,270k,300k, 360k,450k,540k,600k,750k


Gearbox description:
Gearbox type: Linear type gearbox,horizontal/vertical
Gearbox size: 60mm,70mm,80mm,90mm,104mm,120mm

Motor Linear type Reducer
Code Size Linear moving speed mm/s, vertical/horizontal
round shape linear round shap linear diameter and maximum length square shape linear square shape linear size and maximum length
2 60mm 4/4.8/6/6.7/8/10/12/13.4/15/16/20/24/30/33.4/40/48/60/66.8/80/96/120/ 133.6/160/200/240/300/ 334/400/480/600 Φ14mm,500mm 4/4.8/6/6.7/8/10/12/13.4/15/16/20/24/30/33.4/40/48/60/66.8/80/96/120/ 133.6/160/200/240/300/334/400/480/600 £14mm,1000mm
3 70mm 4.8/6/6.7/8/10/12/13.4/ 16/20/24/30/33.4/40/48/60/66.8/80/96/120/133.6/160/200/240/400/480/ 600 Φ14mm,1200mm 4.8/6/6.7/8/10/12/13.4/ 16/20/24/30/33.4/40/48/60/66.8/80/96/120/133.6/160/200/240/400/480/ 600 £14mm,1000mm
4 80mm 5/6/8.3/10/12.5/15/16.7/20/25/30/42/50/60/75/ 83.4/100/120/150/167/ 200/250/300/500/600/ 750 Φ20mm,1200mm 5/6/8.3/10/12.5/15/16.7/20/25/30/42/50/60/75/ 83.4/100/120/150/167/ 200/250/300/500/600/ 750 £20mm,1000
5 90mm 2.2/2.8/3.4/4.2/5.6/6.8/ 9.5/11.3/14/17/19/23/28/34/47/56.5/68/85/94/113/136/170/188/226/282/ 339/471/566/679/849 Φ25,3000mm 2/2.5/3/3.8/5/6/8.3/10/ 12.5/15/16.7/20/25/30/ 42/50/60/75/83.4/100/ 120/150/167/200/250/ 300/417/200/250/300/ 417/500/600/750 £20,1000mm
6 104mm 2.5/3/3.6/4.6/6/7.4/10.2/12.3/15/20.4/24.5/30.6/ 37/51/61/73.5/92/102/ 122.5/147/184/204/245/ 306/368/613/735/919 Φ25,3000mm 2/2.5/3/3.8/5/6/8.3/10/ 12.5/15/16.7/20/25/30/ 42/50/60/75/83.4/100/ 120/150/167/200/250/ 300/417/200/250/300/ 500/600/750 £20,800mm
7 120mm 10.2/14/17/21.2/25.5/ 28.3/34/42.4/51/85/102/127/141/170/204/255/ 339/424/509/707/848/ 1018/1273/ Φ25,3000mm 10.2/14/17/21.2/25.5/ 28.3/34/42.4/51/85/102/127/141/170/204/255/ 339/424/509/707/848/ 1018/1273/ £20,800mm

Application: Automation Equipment
Operating Speed: Adjust Speed, Constant Speed
Power Source: AC Motor
Function: Driving
Casing Protection: Closed Type
Number of Poles: 4poles and 2poles


gear motor

Are there innovations or emerging technologies in the field of gear motor design?

Yes, there are several innovations and emerging technologies in the field of gear motor design. These advancements aim to improve the performance, efficiency, compactness, and reliability of gear motors. Here are some notable innovations and emerging technologies in gear motor design:

1. Miniaturization and Compact Design:

Advancements in manufacturing techniques and materials have enabled the miniaturization of gear motors without compromising their performance. Gear motors with compact designs are highly sought after in applications where space is limited, such as robotics, medical devices, and consumer electronics. Innovative approaches like micro-gear motors and integrated motor-gear units are being developed to achieve smaller form factors while maintaining high torque and efficiency.

2. High-Efficiency Gearing:

New gear designs focus on improving efficiency by reducing friction and mechanical losses. Advanced gear manufacturing techniques, such as precision machining and 3D printing, allow for the creation of intricate gear tooth profiles that optimize power transmission and minimize losses. Additionally, the use of high-performance materials, coatings, and lubricants helps reduce friction and wear, improving overall gear motor efficiency.

3. Magnetic Gearing:

Magnetic gearing is an emerging technology that replaces traditional mechanical gears with magnetic fields to transmit torque. It utilizes the interaction of permanent magnets to transfer power, eliminating the need for physical gear meshing. Magnetic gearing offers advantages such as high efficiency, low noise, compactness, and maintenance-free operation. While still being developed and refined, magnetic gearing holds promise for various applications, including gear motors.

4. Integrated Electronics and Controls:

Gear motor designs are incorporating integrated electronics and controls to enhance performance and functionality. Integrated motor drives and controllers simplify system integration, reduce wiring complexity, and allow for advanced control features. These integrated solutions offer precise speed and torque control, intelligent feedback mechanisms, and connectivity options for seamless integration into automation systems and IoT (Internet of Things) platforms.

5. Smart and Condition Monitoring Capabilities:

New gear motor designs incorporate smart features and condition monitoring capabilities to enable predictive maintenance and optimize performance. Integrated sensors and monitoring systems can detect abnormal operating conditions, track performance parameters, and provide real-time feedback for proactive maintenance and troubleshooting. This helps prevent unexpected failures, extend the lifespan of gear motors, and improve overall system reliability.

6. Energy-Efficient Motor Technologies:

Gear motor design is influenced by advancements in energy-efficient motor technologies. Brushless DC (BLDC) motors and synchronous reluctance motors (SynRM) are gaining popularity due to their higher efficiency, better power density, and improved controllability compared to traditional brushed DC and induction motors. These motor technologies, when combined with optimized gear designs, contribute to overall system energy savings and performance improvements.

These are just a few examples of the innovations and emerging technologies in gear motor design. The field is continuously evolving, driven by the need for more efficient, compact, and reliable motion control solutions in various industries. Gear motor manufacturers and researchers are actively exploring new materials, manufacturing techniques, control strategies, and system integration approaches to meet the evolving demands of modern applications.

gear motor

What are some common challenges or issues associated with gear motors, and how can they be addressed?

Gear motors, like any mechanical system, can face certain challenges or issues that may affect their performance, reliability, or longevity. However, many of these challenges can be addressed through proper design, maintenance, and operational practices. Here are some common challenges associated with gear motors and potential solutions:

1. Gear Wear and Failure:

Over time, gears in a gear motor can experience wear, resulting in decreased performance or even failure. The following measures can address this challenge:

  • Proper Lubrication: Regular lubrication with the appropriate lubricant can minimize friction and wear between gear teeth. It is essential to follow manufacturer recommendations for lubrication intervals and use high-quality lubricants suitable for the specific gear motor.
  • Maintenance and Inspection: Routine maintenance and periodic inspections can help identify early signs of gear wear or damage. Timely replacement of worn gears or components can prevent further damage and ensure the gear motor’s optimal performance.
  • Material Selection: Choosing gears made from durable and wear-resistant materials, such as hardened steel or specialized alloys, can increase their lifespan and resistance to wear.

2. Backlash and Inaccuracy:

Backlash, as discussed earlier, can introduce inaccuracies in gear motor systems. The following approaches can help address this issue:

  • Anti-Backlash Gears: Using anti-backlash gears, which are designed to minimize or eliminate backlash, can significantly reduce inaccuracies caused by gear play.
  • Tight Manufacturing Tolerances: Ensuring precise manufacturing tolerances during gear production helps minimize backlash and improve overall accuracy.
  • Backlash Compensation: Implementing control algorithms or mechanisms to compensate for backlash can help mitigate its effects and improve the accuracy of the gear motor.

3. Noise and Vibrations:

Gear motors can generate noise and vibrations during operation, which may be undesirable in certain applications. The following strategies can help mitigate this challenge:

  • Noise Dampening: Incorporating noise-dampening features, such as vibration-absorbing materials or isolation mounts, can reduce noise and vibrations transmitted from the gear motor to the surrounding environment.
  • Quality Gears and Bearings: Using high-quality gears and bearings can minimize vibrations and noise generation. Precision-machined gears and well-maintained bearings help ensure smooth operation and reduce unwanted noise.
  • Proper Alignment: Ensuring accurate alignment of gears, shafts, and other components reduces the likelihood of noise and vibrations caused by misalignment. Regular inspections and adjustments can help maintain optimal alignment.

4. Overheating and Thermal Management:

Heat buildup can be a challenge in gear motors, especially during prolonged or heavy-duty operation. Effective thermal management techniques can address this issue:

  • Adequate Ventilation: Providing proper ventilation and airflow around the gear motor helps dissipate heat. This can involve designing cooling fins, incorporating fans or blowers, or ensuring sufficient clearance for air circulation.
  • Heat Dissipation Materials: Using heat-dissipating materials, such as aluminum or copper, in motor housings or heat sinks can improve heat dissipation and prevent overheating.
  • Monitoring and Control: Implementing temperature sensors and thermal protection mechanisms allows for real-time monitoring of the gear motor’s temperature. If the temperature exceeds safe limits, the motor can be automatically shut down or adjusted to prevent damage.

5. Load Variations and Shock Loads:

Unexpected load variations or shock loads can impact the performance and durability of gear motors. The following measures can help address this challenge:

  • Proper Sizing and Selection: Choosing gear motors with appropriate torque and load capacity ratings for the intended application helps ensure they can handle expected load variations and occasional shock loads without exceeding their limits.
  • Shock Absorption: Incorporating shock-absorbing mechanisms, such as dampers or resilient couplings, can help mitigate the effects of sudden load changes or impacts on the gear motor.
  • Load Monitoring: Implementing load monitoring systems or sensors allows for real-time monitoring of load variations. This information can be used to adjust operation or trigger protective measures when necessary.

By addressing these common challenges associated with gear motors through appropriate design considerations, regular maintenance, and operational practices, it is possible to enhance their performance, reliability, and longevity.

gear motor

Can you explain the advantages of using gear motors in various mechanical systems?

Gear motors offer several advantages when utilized in various mechanical systems. Their unique characteristics make them well-suited for applications that require controlled power transmission, precise speed control, and torque amplification. Here’s a detailed explanation of the advantages of using gear motors:

1. Torque Amplification:

One of the key advantages of gear motors is their ability to amplify torque. By using different gear ratios, gear motors can increase or decrease the output torque from the motor. This torque amplification is crucial in applications that require high torque output, such as lifting heavy loads or operating machinery with high resistance. Gear motors allow for efficient power transmission, enabling the system to handle demanding tasks effectively.

2. Speed Control:

Gear motors provide precise speed control, allowing for accurate and controlled movement in mechanical systems. By selecting the appropriate gear ratio, the rotational speed of the output shaft can be adjusted to match the requirements of the application. This speed control capability ensures that the mechanical system operates at the desired speed, whether it needs to be fast or slow. Gear motors are commonly used in applications such as conveyors, robotics, and automated machinery, where precise speed control is essential.

3. Directional Control:

Another advantage of gear motors is their ability to control the rotational direction of the output shaft. By using different types of gears, such as spur gears, bevel gears, or worm gears, the direction of rotation can be easily changed. This directional control is beneficial in applications that require bidirectional movement, such as in actuators, robotic arms, and conveyors. Gear motors offer reliable and efficient directional control, contributing to the versatility and functionality of mechanical systems.

4. Efficiency and Power Transmission:

Gear motors are known for their high efficiency in power transmission. The gear system helps distribute the load across multiple gears, reducing the strain on individual components and minimizing power losses. This efficient power transmission ensures that the mechanical system operates with optimal energy utilization and minimizes wasted power. Gear motors are designed to provide reliable and consistent power transmission, resulting in improved overall system efficiency.

5. Compact and Space-Saving Design:

Gear motors are compact in size and offer a space-saving solution for mechanical systems. By integrating the motor and gear system into a single unit, gear motors eliminate the need for additional components and reduce the overall footprint of the system. This compact design is especially beneficial in applications with limited space constraints, allowing for more efficient use of available space while still delivering the necessary power and functionality.

6. Durability and Reliability:

Gear motors are designed to be robust and durable, capable of withstanding demanding operating conditions. The gear system helps distribute the load, reducing the stress on individual gears and increasing overall durability. Additionally, gear motors are often constructed with high-quality materials and undergo rigorous testing to ensure reliability and longevity. This makes gear motors well-suited for continuous operation in industrial and commercial applications, where reliability is crucial.

By leveraging the advantages of torque amplification, speed control, directional control, efficiency, compact design, durability, and reliability, gear motors provide a reliable and efficient solution for various mechanical systems. They are widely used in industries such as robotics, automation, manufacturing, automotive, and many others, where precise and controlled mechanical power transmission is essential.

China supplier Silinman 6W-1.5kw Micro AC Gear Motor   vacuum pump and compressor	China supplier Silinman 6W-1.5kw Micro AC Gear Motor   vacuum pump and compressor
editor by CX 2023-10-20

Leave a Reply

Your email address will not be published. Required fields are marked *