Product Description
0.55kw 0.75kw 3-phase AC gear motor
Motor Specifications
Motor Parameters
| Ratio | Output speed | Output torque | ||||||||||||||||||
| 1/8 HP | 1/4 HP | 1/2 HP | 3/4 HP | 1 HP | 3/2 HP | 2HP | 3HP | 5HP | ||||||||||||
| 0.1KW | 0.2KW | 0.4KW | 0.55KW | 0.75KW | 1.1KW | 1.5KW | 2.2KW | 3.7KW | ||||||||||||
| Hz | ||||||||||||||||||||
| 50 | 60 | 50 | 60 | 50 | 60 | 50 | 60 | 50 | 60 | 50 | 60 | 50 | 60 | 50 | 60 | 50 | 60 | 50 | 60 | |
| 3 | 500 | 600 | 0.19 | 0.16 | 0.37 | 0.31 | 0.70 | 0.60 | 0.96 | 0.83 | 1.30 | 1.10 | 1.91 | 1.61 | 2.60 | 2.20 | 3.80 | 3.20 | 6.00 | 5.50 |
| 5 | 300 | 360 | 0.31 | 0.26 | 0.62 | 0.52 | 1.20 | 1.00 | 1.65 | 1.38 | 2.20 | 1.90 | 3.22 | 2.78 | 4.50 | 3.80 | 6.72 | 5.60 | 11.0 | 10.0 |
| 10 | 150 | 180 | 0.62 | 0.52 | 1.24 | 1.04 | 2.40 | 2.00 | 3.30 | 2.75 | 4.50 | 3.80 | 6.60 | 5.7 | 9.10 | 7.60 | 13.7 | 11.2 | 22.0 | 20.0 |
| 15 | 100 | 120 | 0.91 | 0.76 | 1.80 | 1.50 | 3.60 | 3.00 | 4.95 | 4.13 | 6.80 | 5.70 | 9.70 | 8.36 | 13.5 | 11.3 | 20.1 | 16.8 | 32.6 | 29.8 |
| 20 | 75 | 90 | 1.20 | 1.00 | 2.40 | 2.00 | 4.80 | 4.00 | 6.60 | 5.50 | 9.00 | 7.50 | 13.20 | 11.0 | 18.1 | 15.1 | 26.8 | 22.4 | 43.6 | 36.0 |
| 25 | 60 | 72 | 1.40 | 1.20 | 3.00 | 2.50 | 6.00 | 5.00 | 8.25 | 6.88 | 11.2 | 9.40 | 16.43 | 13.79 | 22.6 | 18.9 | 33.6 | 28.0 | 53.9 | 49.53 |
| 30 | 50 | 60 | 1.80 | 1.50 | 3.60 | 3.00 | 7.20 | 6.00 | 9.90 | 8.25 | 13.5 | 11.3 | 19.80 | 16.57 | 27.1 | 22.6 | 40.3 | 33.6 | 64.7 | 58.8 |
| 40 | 37 | 45 | 2.20 | 1.90 | 4.60 | 3.90 | 9.30 | 7.80 | 12.79 | 10.73 | 17.5 | 14.6 | 25.66 | 21.41 | 34.9 | 29.1 | 52.0 | 43.4 | 86.3 | 78.4 |
| 45 | 33 | 40 | 2.70 | 2.20 | 5.40 | 4.40 | 10.9 | 9.10 | 14.99 | 12.51 | 20.6 | 17.0 | 30.21 | 24.93 | 41.1 | 34.0 | 59.8 | 49.6 | 98.5 | 81.7 |
| 50 | 30 | 36 | 2.80 | 2.40 | 5.70 | 4.80 | 11.6 | 9.70 | 15.95 | 13.34 | 21.9 | 18.3 | 32.12 | 26.84 | 43.6 | 36.4 | 65.1 | 54.3 | 107 | 97.0 |
| 60 | 25 | 30 | 3.40 | 2.90 | 6.90 | 5.80 | 13.9 | 11.6 | 19.11 | 15.95 | 26.2 | 21.9 | 38.43 | 30.21 | 52.4 | 43.7 | 78.1 | 65.1 | 127 | 115 |
| 70 | 21 | 25 | 4.30 | 3.60 | 8.00 | 6.80 | 16.2 | 13.5 | 22.28 | 18.56 | 31.5 | 26.3 | 46.20 | 38.57 | 62.4 | 52.0 | 92.5 | 77.1 | ||
| 80 | 19 | 23 | 4.80 | 4.00 | 9.20 | 7.70 | 18.4 | 15.4 | 25.30 | 21.18 | 35.5 | 29.6 | 52.07 | 43.41 | 70.8 | 59.0 | 105 | 87.5 | ||
| 90 | 17 | 20 | 5.20 | 4.40 | 10.3 | 8.60 | 20.7 | 17.3 | 28.46 | 23.79 | 39.3 | 32.8 | 57.64 | 48.10 | 77.1 | 64.3 | 113 | 94.3 | ||
| 100 | 15 | 18 | 5.80 | 4.90 | 11.5 | 9.60 | 23.0 | 19.2 | 31.63 | 26.40 | 43.2 | 36.0 | 63.36 | 52.8 | 83.7 | 69.8 | 126 | 105 | ||
| 120 | 12 | 15 | 6.90 | 5.80 | 13.8 | 11.5 | 27.7 | 23.1 | 38.09 | 31.76 | 51.8 | 43.2 | 75.97 | 63.36 | 101 | 83.7 | ||||
| 140 | 11 | 13 | 8.00 | 6.70 | 16.0 | 13.4 | 32.0 | 26.7 | 44.0 | 36.71 | 59.7 | 49.8 | 87.56 | 73.04 | 116 | 96.8 | ||||
| 160 | 9 | 11 | 9.10 | 7.60 | 18.3 | 15.3 | 36.3 | 30.3 | 49.91 | 41.66 | 68.0 | 56.7 | 99.73 | 83.16 | 132 | 110 | ||||
| 180 | 8 | 10 | 10.3 | 8.60 | 20.7 | 17.3 | 40.8 | 34.0 | 56.10 | 46.78 | 76.8 | 64.0 | 112.6 | 93.87 | 148 | 123 | ||||
| 200 | 7 | 9 | 11.6 | 9.70 | 22.9 | 19.1 | 43.2 | 36.0 | 59.40 | 49.5 | 82.8 | 69.0 | ||||||||
Note:
We only show several motor models, if these models are not what you want, please freely tell us about your requirement. We will provide you with a suitable motor solution and price soon.
FAQ
1 Q: What’s your MOQ?
A: 1unit is ok for different types.
2 Q: What about your warranty?
A: One year.
3 Q: Do you provide OEM service with customer-logo?
A: Yes, we could do OEM orders, but we mainly focus on our own brand.
4 Q: How about your payment terms ?
A: TT, western union and paypal. 100% payment in advanced for orders less $5,000. 30% deposit and balance before delivery for orders over $5,000.
5 Q: How about your packing ?
A: Carton, Plywood case. If you need more, we can pack all goods with pallet
6 Q: What information should be given, if I buy from you ?
A: Rated power, gearbox ratio, input speed, mounting position. More details, better!
7 Q: How do you deliver the order?
A: We will compare and choose the most suitable ways of delivery by sea, air or express courier.
Warmly welcome your inquiries !
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Speed: | High Speed |
| Number of Stator: | Three-Phase |
| Function: | Driving, Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 4 |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
What types of feedback mechanisms are commonly integrated into gear motors for control?
Gear motors often incorporate feedback mechanisms to provide control and improve their performance. These feedback mechanisms enable the motor to monitor and adjust its operation based on various parameters. Here are some commonly integrated feedback mechanisms in gear motors:
1. Encoder Feedback:
An encoder is a device that provides position and speed feedback by converting the motor’s mechanical motion into electrical signals. Encoders commonly used in gear motors include:
- Incremental Encoders: These encoders provide information about the motor’s shaft position and speed relative to a reference point. They generate pulses as the motor rotates, allowing precise measurement of position and speed changes.
- Absolute Encoders: Absolute encoders provide the precise position of the motor’s shaft within a full revolution. They do not require a reference point and provide accurate feedback even after power loss or motor restart.
2. Hall Effect Sensors:
Hall effect sensors use the principle of the Hall effect to detect the presence and strength of a magnetic field. They are commonly used in gear motors for speed and position sensing. Hall effect sensors provide feedback by detecting changes in the motor’s magnetic field and converting them into electrical signals.
3. Current Sensors:
Current sensors monitor the electrical current flowing through the motor’s windings. By measuring the current, these sensors provide feedback regarding the motor’s torque, load conditions, and power consumption. Current sensors are essential for motor control strategies such as current limiting, overcurrent protection, and closed-loop control.
4. Temperature Sensors:
Temperature sensors are integrated into gear motors to monitor the motor’s temperature. They provide feedback on the motor’s thermal conditions, allowing the control system to adjust the motor’s operation to prevent overheating. Temperature sensors are crucial for ensuring the motor’s reliability and preventing damage due to excessive heat.
5. Hall Effect Limit Switches:
Hall effect limit switches are used to detect the presence or absence of a magnetic field within a specific range. They are commonly employed as end-of-travel or limit switches in gear motors. Hall effect limit switches provide feedback to the control system, indicating when the motor has reached a specific position or when it has moved beyond the allowed range.
6. Resolver Feedback:
A resolver is an electromagnetic device used to determine the position and speed of a rotating shaft. It provides feedback by generating sine and cosine signals that correspond to the shaft’s angular position. Resolver feedback is commonly used in high-performance gear motors requiring accurate position and speed control.
These feedback mechanisms, when integrated into gear motors, enable precise control, monitoring, and adjustment of various motor parameters. By utilizing feedback signals from encoders, Hall effect sensors, current sensors, temperature sensors, limit switches, or resolvers, the control system can optimize the motor’s performance, ensure accurate positioning, maintain speed control, and protect the motor from excessive loads or overheating.
What is the significance of gear reduction in gear motors, and how does it affect efficiency?
Gear reduction plays a significant role in gear motors as it enables the motor to deliver higher torque while reducing the output speed. This feature has several important implications for gear motors, including enhanced power transmission, improved control, and potential trade-offs in terms of efficiency. Here’s a detailed explanation of the significance of gear reduction in gear motors and its effect on efficiency:
Significance of Gear Reduction:
1. Increased Torque: Gear reduction allows gear motors to generate higher torque output compared to a motor without gears. By reducing the rotational speed at the output shaft, gear reduction increases the mechanical advantage of the system. This increased torque is beneficial in applications that require high torque to overcome resistance, such as lifting heavy loads or driving machinery with high inertia.
2. Improved Control: Gear reduction enhances the control and precision of gear motors. By reducing the speed, gear reduction allows for finer control over the motor’s rotational movement. This is particularly important in applications that require precise positioning or accurate speed control. The gear reduction mechanism enables gear motors to achieve smoother and more controlled movements, reducing the risk of overshooting or undershooting the desired position.
3. Load Matching: Gear reduction helps match the motor’s power characteristics to the load requirements. Different applications have varying torque and speed requirements. Gear reduction allows the gear motor to achieve a better match between the motor’s power output and the specific requirements of the load. It enables the motor to operate closer to its peak efficiency by optimizing the torque-speed trade-off.
Effect on Efficiency:
While gear reduction offers several advantages, it can also affect the efficiency of gear motors. Here’s how gear reduction impacts efficiency:
1. Mechanical Efficiency: The gear reduction process introduces mechanical components such as gears, bearings, and lubrication systems. These components introduce additional friction and mechanical losses into the system. As a result, some energy is lost in the form of heat during the gear reduction process. The efficiency of the gear motor is influenced by the quality of the gears, the lubrication used, and the overall design of the gear system. Well-designed and properly maintained gear systems can minimize these losses and optimize mechanical efficiency.
2. System Efficiency: Gear reduction affects the overall system efficiency by impacting the motor’s electrical efficiency. In gear motors, the motor typically operates at higher speeds and lower torques compared to a direct-drive motor. The overall system efficiency takes into account both the electrical efficiency of the motor and the mechanical efficiency of the gear system. While gear reduction can increase the torque output, it also introduces additional losses due to increased mechanical complexity. Therefore, the overall system efficiency may be lower compared to a direct-drive motor for certain applications.
It’s important to note that the efficiency of gear motors is influenced by various factors beyond gear reduction, such as motor design, control systems, and operating conditions. The selection of high-quality gears, proper lubrication, and regular maintenance can help minimize losses and improve efficiency. Additionally, advancements in gear technology, such as the use of precision gears and improved lubricants, can contribute to higher overall efficiency in gear motors.
In summary, gear reduction is significant in gear motors as it provides increased torque, improved control, and better load matching. However, gear reduction can introduce mechanical losses and affect the overall efficiency of the system. Proper design, maintenance, and consideration of application requirements are essential to optimize the balance between torque, speed, and efficiency in gear motors.
Can you explain the advantages of using gear motors in various mechanical systems?
Gear motors offer several advantages when utilized in various mechanical systems. Their unique characteristics make them well-suited for applications that require controlled power transmission, precise speed control, and torque amplification. Here’s a detailed explanation of the advantages of using gear motors:
1. Torque Amplification:
One of the key advantages of gear motors is their ability to amplify torque. By using different gear ratios, gear motors can increase or decrease the output torque from the motor. This torque amplification is crucial in applications that require high torque output, such as lifting heavy loads or operating machinery with high resistance. Gear motors allow for efficient power transmission, enabling the system to handle demanding tasks effectively.
2. Speed Control:
Gear motors provide precise speed control, allowing for accurate and controlled movement in mechanical systems. By selecting the appropriate gear ratio, the rotational speed of the output shaft can be adjusted to match the requirements of the application. This speed control capability ensures that the mechanical system operates at the desired speed, whether it needs to be fast or slow. Gear motors are commonly used in applications such as conveyors, robotics, and automated machinery, where precise speed control is essential.
3. Directional Control:
Another advantage of gear motors is their ability to control the rotational direction of the output shaft. By using different types of gears, such as spur gears, bevel gears, or worm gears, the direction of rotation can be easily changed. This directional control is beneficial in applications that require bidirectional movement, such as in actuators, robotic arms, and conveyors. Gear motors offer reliable and efficient directional control, contributing to the versatility and functionality of mechanical systems.
4. Efficiency and Power Transmission:
Gear motors are known for their high efficiency in power transmission. The gear system helps distribute the load across multiple gears, reducing the strain on individual components and minimizing power losses. This efficient power transmission ensures that the mechanical system operates with optimal energy utilization and minimizes wasted power. Gear motors are designed to provide reliable and consistent power transmission, resulting in improved overall system efficiency.
5. Compact and Space-Saving Design:
Gear motors are compact in size and offer a space-saving solution for mechanical systems. By integrating the motor and gear system into a single unit, gear motors eliminate the need for additional components and reduce the overall footprint of the system. This compact design is especially beneficial in applications with limited space constraints, allowing for more efficient use of available space while still delivering the necessary power and functionality.
6. Durability and Reliability:
Gear motors are designed to be robust and durable, capable of withstanding demanding operating conditions. The gear system helps distribute the load, reducing the stress on individual gears and increasing overall durability. Additionally, gear motors are often constructed with high-quality materials and undergo rigorous testing to ensure reliability and longevity. This makes gear motors well-suited for continuous operation in industrial and commercial applications, where reliability is crucial.
By leveraging the advantages of torque amplification, speed control, directional control, efficiency, compact design, durability, and reliability, gear motors provide a reliable and efficient solution for various mechanical systems. They are widely used in industries such as robotics, automation, manufacturing, automotive, and many others, where precise and controlled mechanical power transmission is essential.
editor by CX 2024-04-19
China Custom ZD Electric Brake / Fan Connection Box Right Angle Hollow Shaft Helical Hypoid AC Induction Gear Motor vacuum pump for ac
Product Description
Model Selection
ZD Leader has a wide range of micro motor production lines in the industry, including DC Motor, AC Motor, Brushless Motor, Planetary Gear Motor, Drum Motor, Planetary Gearbox, RV Reducer and Harmonic Gearbox etc. Through technical innovation and customization, we help you create outstanding application systems and provide flexible solutions for various industrial automation situations.
• Model Selection
Our professional sales representive and technical team will choose the right model and transmission solutions for your usage depend on your specific parameters.
• Drawing Request
If you need more product parameters, catalogues, CAD or 3D drawings, please contact us.
• On Your Need
We can modify standard products or customize them to meet your specific needs.
Product Parameters
Hypoid Gear Motor
| MOTOR TYPE | ZDF3 |
| OUTPUT POWER | 100W / 200W / 400W / 750W / 1500W / 2200W (Can Be Customized) |
| OUTPUT SHAFT | Hollow Shaft / CHINAMFG Shaft |
| Voltage type | 3 phase 220V(50/60HZ), 3 phase 380V(50/60HZ) |
| Phase | Three-Phase |
| Insulation Grade | F stage |
| Accessories | Electric Brake / Fan / Connection Box |
| Gear Ratio | 5K-240K |
Detailed Images
Other Products
Company Profile
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Speed: | Constant Speed |
| Number of Stator: | Single-Phase |
| Function: | Driving, Control |
| Casing Protection: | Closed Type |
| Number of Poles: | 2 |
| Customization: |
Available
|
|
|---|
Can gear motors be used in robotics, and if so, what are some notable applications?
Yes, gear motors are widely used in robotics due to their ability to provide torque, precise control, and compact size. They play a crucial role in various robotic applications, enabling the movement, manipulation, and control of robotic systems. Here are some notable applications of gear motors in robotics:
1. Robotic Arm Manipulation:
Gear motors are commonly used in robotic arms to provide precise and controlled movement. They enable the articulation of the arm’s joints, allowing the robot to reach different positions and orientations. Gear motors with high torque capabilities are essential for lifting, rotating, and manipulating objects with varying weights and sizes.
2. Mobile Robots:
Gear motors are employed in mobile robots, including wheeled robots and legged robots, to drive their locomotion. They provide the necessary torque and control for the robot to move, turn, and navigate in different environments. Gear motors with appropriate gear ratios ensure the robot’s mobility, stability, and maneuverability.
3. Robotic Grippers and End Effectors:
Gear motors are used in robotic grippers and end effectors to control the opening, closing, and gripping force. By integrating gear motors into the gripper mechanism, robots can grasp and manipulate objects of various shapes, sizes, and weights. The gear motors enable precise control over the gripping action, allowing the robot to handle delicate or fragile objects with care.
4. Autonomous Drones and UAVs:
Gear motors are utilized in the propulsion systems of autonomous drones and unmanned aerial vehicles (UAVs). They drive the propellers or rotors, providing the necessary thrust and control for the drone’s flight. Gear motors with high power-to-weight ratios, efficient energy conversion, and precise speed control are crucial for achieving stable and maneuverable flight in drones.
5. Humanoid Robots:
Gear motors are integral to the movement and functionality of humanoid robots. They are used in robotic joints, such as hips, knees, and shoulders, to enable human-like movements. Gear motors with appropriate torque and speed capabilities allow humanoid robots to walk, run, climb stairs, and perform complex motions resembling human actions.
6. Robotic Exoskeletons:
Gear motors play a vital role in robotic exoskeletons, which are wearable robotic devices designed to augment human strength and assist in physical tasks. Gear motors are used in the exoskeleton’s joints and actuators, providing the necessary torque and control to enhance human abilities. They enable users to perform tasks with reduced effort, assist in rehabilitation, or provide support in physically demanding environments.
These are just a few notable applications of gear motors in robotics. Their versatility, torque capabilities, precise control, and compact size make them indispensable components in various robotic systems. Gear motors enable robots to perform complex tasks, move with agility, interact with the environment, and assist humans in a wide range of applications, from industrial automation to healthcare and exploration.
What are some common challenges or issues associated with gear motors, and how can they be addressed?
Gear motors, like any mechanical system, can face certain challenges or issues that may affect their performance, reliability, or longevity. However, many of these challenges can be addressed through proper design, maintenance, and operational practices. Here are some common challenges associated with gear motors and potential solutions:
1. Gear Wear and Failure:
Over time, gears in a gear motor can experience wear, resulting in decreased performance or even failure. The following measures can address this challenge:
- Proper Lubrication: Regular lubrication with the appropriate lubricant can minimize friction and wear between gear teeth. It is essential to follow manufacturer recommendations for lubrication intervals and use high-quality lubricants suitable for the specific gear motor.
- Maintenance and Inspection: Routine maintenance and periodic inspections can help identify early signs of gear wear or damage. Timely replacement of worn gears or components can prevent further damage and ensure the gear motor’s optimal performance.
- Material Selection: Choosing gears made from durable and wear-resistant materials, such as hardened steel or specialized alloys, can increase their lifespan and resistance to wear.
2. Backlash and Inaccuracy:
Backlash, as discussed earlier, can introduce inaccuracies in gear motor systems. The following approaches can help address this issue:
- Anti-Backlash Gears: Using anti-backlash gears, which are designed to minimize or eliminate backlash, can significantly reduce inaccuracies caused by gear play.
- Tight Manufacturing Tolerances: Ensuring precise manufacturing tolerances during gear production helps minimize backlash and improve overall accuracy.
- Backlash Compensation: Implementing control algorithms or mechanisms to compensate for backlash can help mitigate its effects and improve the accuracy of the gear motor.
3. Noise and Vibrations:
Gear motors can generate noise and vibrations during operation, which may be undesirable in certain applications. The following strategies can help mitigate this challenge:
- Noise Dampening: Incorporating noise-dampening features, such as vibration-absorbing materials or isolation mounts, can reduce noise and vibrations transmitted from the gear motor to the surrounding environment.
- Quality Gears and Bearings: Using high-quality gears and bearings can minimize vibrations and noise generation. Precision-machined gears and well-maintained bearings help ensure smooth operation and reduce unwanted noise.
- Proper Alignment: Ensuring accurate alignment of gears, shafts, and other components reduces the likelihood of noise and vibrations caused by misalignment. Regular inspections and adjustments can help maintain optimal alignment.
4. Overheating and Thermal Management:
Heat buildup can be a challenge in gear motors, especially during prolonged or heavy-duty operation. Effective thermal management techniques can address this issue:
- Adequate Ventilation: Providing proper ventilation and airflow around the gear motor helps dissipate heat. This can involve designing cooling fins, incorporating fans or blowers, or ensuring sufficient clearance for air circulation.
- Heat Dissipation Materials: Using heat-dissipating materials, such as aluminum or copper, in motor housings or heat sinks can improve heat dissipation and prevent overheating.
- Monitoring and Control: Implementing temperature sensors and thermal protection mechanisms allows for real-time monitoring of the gear motor’s temperature. If the temperature exceeds safe limits, the motor can be automatically shut down or adjusted to prevent damage.
5. Load Variations and Shock Loads:
Unexpected load variations or shock loads can impact the performance and durability of gear motors. The following measures can help address this challenge:
- Proper Sizing and Selection: Choosing gear motors with appropriate torque and load capacity ratings for the intended application helps ensure they can handle expected load variations and occasional shock loads without exceeding their limits.
- Shock Absorption: Incorporating shock-absorbing mechanisms, such as dampers or resilient couplings, can help mitigate the effects of sudden load changes or impacts on the gear motor.
- Load Monitoring: Implementing load monitoring systems or sensors allows for real-time monitoring of load variations. This information can be used to adjust operation or trigger protective measures when necessary.
By addressing these common challenges associated with gear motors through appropriate design considerations, regular maintenance, and operational practices, it is possible to enhance their performance, reliability, and longevity.
Can you explain the advantages of using gear motors in various mechanical systems?
Gear motors offer several advantages when utilized in various mechanical systems. Their unique characteristics make them well-suited for applications that require controlled power transmission, precise speed control, and torque amplification. Here’s a detailed explanation of the advantages of using gear motors:
1. Torque Amplification:
One of the key advantages of gear motors is their ability to amplify torque. By using different gear ratios, gear motors can increase or decrease the output torque from the motor. This torque amplification is crucial in applications that require high torque output, such as lifting heavy loads or operating machinery with high resistance. Gear motors allow for efficient power transmission, enabling the system to handle demanding tasks effectively.
2. Speed Control:
Gear motors provide precise speed control, allowing for accurate and controlled movement in mechanical systems. By selecting the appropriate gear ratio, the rotational speed of the output shaft can be adjusted to match the requirements of the application. This speed control capability ensures that the mechanical system operates at the desired speed, whether it needs to be fast or slow. Gear motors are commonly used in applications such as conveyors, robotics, and automated machinery, where precise speed control is essential.
3. Directional Control:
Another advantage of gear motors is their ability to control the rotational direction of the output shaft. By using different types of gears, such as spur gears, bevel gears, or worm gears, the direction of rotation can be easily changed. This directional control is beneficial in applications that require bidirectional movement, such as in actuators, robotic arms, and conveyors. Gear motors offer reliable and efficient directional control, contributing to the versatility and functionality of mechanical systems.
4. Efficiency and Power Transmission:
Gear motors are known for their high efficiency in power transmission. The gear system helps distribute the load across multiple gears, reducing the strain on individual components and minimizing power losses. This efficient power transmission ensures that the mechanical system operates with optimal energy utilization and minimizes wasted power. Gear motors are designed to provide reliable and consistent power transmission, resulting in improved overall system efficiency.
5. Compact and Space-Saving Design:
Gear motors are compact in size and offer a space-saving solution for mechanical systems. By integrating the motor and gear system into a single unit, gear motors eliminate the need for additional components and reduce the overall footprint of the system. This compact design is especially beneficial in applications with limited space constraints, allowing for more efficient use of available space while still delivering the necessary power and functionality.
6. Durability and Reliability:
Gear motors are designed to be robust and durable, capable of withstanding demanding operating conditions. The gear system helps distribute the load, reducing the stress on individual gears and increasing overall durability. Additionally, gear motors are often constructed with high-quality materials and undergo rigorous testing to ensure reliability and longevity. This makes gear motors well-suited for continuous operation in industrial and commercial applications, where reliability is crucial.
By leveraging the advantages of torque amplification, speed control, directional control, efficiency, compact design, durability, and reliability, gear motors provide a reliable and efficient solution for various mechanical systems. They are widely used in industries such as robotics, automation, manufacturing, automotive, and many others, where precise and controlled mechanical power transmission is essential.
editor by CX 2024-04-15
China Custom AC Motor/Three Phase Electro-Magnetic Brake Induction Motor with 22kw/4pole vacuum pump for ac
Product Description
HMEJ(AC) series Self-Braking Electric Motor
HMEJ series AC brake motor is three-phase asynchronous motor which is totally enclosed squirrel cage with additional AC brake of disk type. It has advantage of fast brake, simple structure, high reliability and good versatility. In additional, the brake has manual work releasing structure which is widely used in mechanical equipment and transmissions devices for various requirements of rapid stop and accurate positioning.
| TYPE | POWER | 380V 50Hz Full Loaded | Weight | Housing Material | |||||||||
| (kw) | Speed (r/min) |
Current(A) | Eff | power factor | () | () | () | (Nm) | <(s) | <(w) | (kg) | ||
| Synchrouns Speed 3000r/min(2P)380V 50Hz | |||||||||||||
| YEJA711-2 | 0.37 | 2756 | 1 | 70.0 | 0.81 | 6.1 | 2.2 | 2.2 | 4 | 0.20 | 40 | 9.3 | ALU |
| YEJA712-2 | 0.55 | 2792 | 1.4 | 72.0 | 0.82 | 6.1 | 2.2 | 2.2 | 4 | 0.20 | 40 | 10.5 | |
| YEJA801-2 | 0.75 | 2830 | 1.9 | 72.1 | 0.83 | 6.1 | 2.2 | 2.3 | 7.5 | 0.20 | 50 | 14 | |
| YEJA802-2 | 1.1 | 2830 | 2.7 | 75.0 | 0.84 | 7.0 | 2.2 | 2.3 | 7.5 | 0.20 | 50 | 15 | |
| YEJA90S-2 | 1.5 | 2840 | 3.5 | 77.2 | 0.84 | 7.0 | 2.2 | 2.3 | 15 | 0.20 | 60 | 20 | |
| YEJA90L-2 | 2.2 | 2840 | 4.9 | 79.7 | 0.85 | 7.0 | 2.2 | 2.3 | 15 | 0.20 | 60 | 23 | |
| YEJA100L-2 | 3 | 2860 | 6.4 | 81.5 | 0.87 | 7.5 | 2.2 | 2.3 | 30 | 0.20 | 80 | 31 | |
| YEJA112M-2 | 4 | 2880 | 8.3 | 83.1 | 0.88 | 7.5 | 2.2 | 2.3 | 40 | 0.25 | 100 | 44 | |
| YEJA132S1-2 | 5.5 | 2900 | 11.2 | 84.7 | 0.88 | 7.5 | 2.2 | 2.3 | 75 | 0.25 | 130 | 80 | |
| YEJA132S2-2 | 7.5 | 2900 | 15.1 | 86.0 | 0.88 | 7.5 | 2.2 | 2.3 | 75 | 0.25 | 130 | 94 | |
| YEJA160M1-2 | 11 | 2930 | 21.4 | 87.6 | 0.89 | 7.5 | 2.2 | 2.3 | 150 | 0.35 | 150 | 150 | |
| YEJA160M2-2 | 15 | 2930 | 28.9 | 88.7 | 0.89 | 7.5 | 2.2 | 2.3 | 150 | 0.35 | 150 | 160 | |
| YEJA160L-2 | 18.5 | 2930 | 35 | 89.3 | 0.90 | 7.5 | 2.2 | 2.3 | 150 | 0.35 | 150 | 180 | |
| Synchrouns Speed1500r/min(4Pole)380V 50Hz | |||||||||||||
| YEJA711-4 | 0.25 | 1390 | 0.8 | 65.0 | 0.74 | 5.2 | 2.1 | 2.2 | 4 | 0.20 | 40 | 9.3 | ALU |
| YEJA712-4 | 0.37 | 1390 | 1.13 | 67.0 | 0.74 | 5.2 | 2.1 | 2.2 | 4 | 0.20 | 40 | 10.5 | |
| YEJA801-4 | 0.55 | 1390 | 1.6 | 71.0 | 0.74 | 5.2 | 2.4 | 2.3 | 7.5 | 0.20 | 50 | 14 | |
| YEJA802-4 | 0.75 | 1390 | 2.1 | 73.0 | 0.75 | 6.0 | 2.3 | 2.3 | 7.5 | 0.20 | 50 | 15 | |
| YEJA90S-4 | 1.1 | 1400 | 2.9 | 76.2 | 0.76 | 6.0 | 2.3 | 2.3 | 15 | 0.20 | 60 | 20 | |
| YEJA90L-4 | 1.5 | 1400 | 3.7 | 78.5 | 0.78 | 6.0 | 2.3 | 2.3 | 15 | 0.20 | 60 | 23 | |
| YEJA100L1-4 | 2.2 | 1420 | 5.2 | 81.0 | 0.80 | 7.0 | 2.3 | 2.3 | 30 | 0.20 | 80 | 31 | |
| YEJA100L2-4 | 3 | 1420 | 6.8 | 82.3 | 0.81 | 7.0 | 2.3 | 2.3 | 30 | 0.20 | 80 | 33 | |
| YEJA112M-4 | 4 | 1440 | 8.8 | 84.2 | 0.82 | 7.0 | 2.3 | 2.3 | 40 | 0.25 | 100 | 44 | |
| YEJA132S-4 | 5.5 | 1440 | 11.8 | 85.7 | 0.83 | 7.0 | 2.3 | 2.3 | 75 | 0.25 | 130 | 80 | CI |
| YEJA132M-4 | 7.5 | 1440 | 15.8 | 87.0 | 0.84 | 7.0 | 2.3 | 2.3 | 75 | 0.25 | 130 | 94 | |
| YEJA160M-4 | 11 | 1460 | 22.5 | 88.4 | 0.84 | 7.0 | 2.2 | 2.3 | 150 | 0.35 | 150 | 150 | |
| YEJA160L-4 | 15 | 1460 | 30 | 89.4 | 0.85 | 7.0 | 2.2 | 2.3 | 150 | 0.35 | 150 | 160 | |
| Frame | Rated Output | 380V 50Hz Full Loaded | Weight | ||||||||||
| (kw) | Speed (r/min) |
Current | Eff% | Power Factor | () | () | () | (Nm) | <(s) | <(w) | (kg) | ||
| 1000r/min(6)380V 50Hz | |||||||||||||
| YEJA711-6 | 0.18 | 880 | 0.74 | 56.0 | 0.66 | 4.0 | 1.9 | 2.0 | 4 | 0.20 | 40 | 9.3 | ALU |
| YEJA712-6 | 0.25 | 880 | 0.95 | 59.0 | 0.68 | 4.0 | 1.9 | 2.0 | 4 | 0.20 | 40 | 10.5 | |
| YEJA801-6 | 0.37 | 900 | 1.3 | 62.0 | 0.70 | 4.7 | 1.9 | 2.0 | 7.5 | 0.20 | 50 | 14 | |
| YEJA802-6 | 0.55 | 900 | 1.8 | 65.0 | 0.70 | 4.7 | 1.9 | 2.1 | 7.5 | 0.20 | 50 | 15 | |
| YEJA90S-6 | 0.75 | 910 | 2.3 | 69.0 | 0.70 | 5.5 | 2.0 | 2.1 | 15 | 0.20 | 60 | 20 | |
| YEJA90L-6 | 1.1 | 910 | 3.2 | 72.0 | 0.72 | 5.5 | 2.0 | 2.1 | 15 | 0.20 | 60 | 23 | |
| YEJA100L-6 | 1.5 | 940 | 4.0 | 76.0 | 0.74 | 5.5 | 2.0 | 2.1 | 30 | 0.20 | 80 | 33 | |
| YEJA112M-6 | 2.2 | 950 | 5.7 | 79.0 | 0.74 | 6.5 | 2.0 | 2.1 | 40 | 0.25 | 100 | 44 | |
| YEJA132S-6 | 3 | 960 | 7.4 | 81.0 | 0.76 | 6.5 | 2.1 | 2.1 | 75 | 0.25 | 130 | 80 | CI |
| YEJA132M1-6 | 4 | 960 | 9.8 | 82.0 | 0.76 | 6.5 | 2.1 | 2.1 | 75 | 0.25 | 130 | 90 | |
| YEJA132M2-6 | 5.5 | 960 | 12.9 | 84.0 | 0.77 | 6.5 | 2.1 | 2.1 | 75 | 0.25 | 130 | 94 | |
| YEJA160M-6 | 7.5 | 970 | 17.2 | 86.0 | 0.77 | 6.5 | 2.0 | 2.1 | 150 | 0.35 | 150 | 150 | |
| YEJA160L-6 | 11 | 970 | 24.5 | 87.5 | 0.78 | 6.5 | 2.0 | 2.1 | 150 | 0.35 | 150 | 160 | |
| 750r/min(8)380V 50Hz | |||||||||||||
| YEJA801-8 | 0.18 | 690 | 0.94 | 51.0 | 0.57 | 3.3 | 1.8 | 1.9 | 7.5 | 0.20 | 50 | 14 | ALU |
| YEJA802-8 | 0.25 | 690 | 1.2 | 54.0 | 0.58 | 3.3 | 1.8 | 1.9 | 7.5 | 0.20 | 50 | 15 | |
| YEJA90S-8 | 0.37 | 690 | 1.5 | 62.0 | 0.60 | 4.0 | 1.8 | 1.9 | 15 | 0.20 | 60 | 20 | |
| YEJA90L-8 | 0.55 | 690 | 2.2 | 63.0 | 0.61 | 4.0 | 1.8 | 2.0 | 15 | 0.20 | 60 | 23 | |
| YEJA100L1-8 | 0.75 | 700 | 2.4 | 71.0 | 0.67 | 4.0 | 1.8 | 2.0 | 30 | 0.20 | 80 | 31 | |
| YEJA100L2-8 | 1.1 | 700 | 3.3 | 73.0 | 0.69 | 5.0 | 1.8 | 2.0 | 30 | 0.20 | 80 | 33 | |
| YEJA112M-8 | 1.5 | 700 | 4.4 | 75.0 | 0.69 | 5.0 | 1.8 | 2.0 | 40 | 0.25 | 100 | 44 | |
| YEJA132S-8 | 2.2 | 710 | 6.0 | 80.5 | 0.71 | 6.0 | 1.8 | 2.0 | 75 | 0.25 | 130 | 80 | CI |
| YEJA132M-8 | 3 | 710 | 8.1 | 82.5 | 0.71 | 6.0 | 1.8 | 2.0 | 75 | 0.25 | 130 | 94 | |
| YEJA160M1-8 | 4 | 720 | 10.3 | 84.0 | 0.73 | 6.0 | 1.9 | 2.0 | 150 | 0.35 | 150 | 140 | |
| YEJA160M2-8 | 5.5 | 720 | 13.6 | 85.0 | 0.74 | 6.0 | 2.0 | 2.0 | 150 | 0.35 | 150 | 150 | |
| YEJA160L-8 | 7.5 | 720 | 18.4 | 86.0 | 0.74 | 6.0 | 2.0 | 2.0 | 150 | 0.35 | 150 | 160 | |
Our factory
Contact us
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Universal, Industrial, Household Appliances |
|---|---|
| Operating Speed: | High Speed |
| Function: | Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 4 |
| Type: | Y2ej |
| Customization: |
Available
|
|
|---|
Can you explain the concept of motor efficiency and how it relates to AC motors?
Motor efficiency is a measure of how effectively an electric motor converts electrical power into mechanical power. It represents the ratio of the motor’s useful output power (mechanical power) to the input power (electrical power) it consumes. Higher efficiency indicates that the motor converts a larger percentage of the electrical energy into useful mechanical work, while minimizing energy losses in the form of heat and other inefficiencies.
In the case of AC motors, efficiency is particularly important due to their wide usage in various applications, ranging from residential appliances to industrial machinery. AC motors can be both induction motors, which are the most common type, and synchronous motors, which operate at a constant speed synchronized with the frequency of the power supply.
The efficiency of an AC motor is influenced by several factors:
- Motor Design: The design of the motor, including its core materials, winding configuration, and rotor construction, affects its efficiency. Motors that are designed with low-resistance windings, high-quality magnetic materials, and optimized rotor designs tend to have higher efficiency.
- Motor Size: The physical size of the motor can also impact its efficiency. Larger motors generally have higher efficiency because they can dissipate heat more effectively, reducing losses. However, it’s important to select a motor size that matches the application requirements to avoid operating the motor at low efficiency due to underloading.
- Operating Conditions: The operating conditions, such as load demand, speed, and temperature, can influence motor efficiency. Motors are typically designed for maximum efficiency at or near their rated load. Operating the motor beyond its rated load or at very light loads can reduce efficiency. Additionally, high ambient temperatures can cause increased losses and reduced efficiency.
- Magnetic Losses: AC motors experience losses due to magnetic effects, such as hysteresis and eddy current losses in the core materials. These losses result in heat generation and reduce overall efficiency. Motor designs that minimize magnetic losses through the use of high-quality magnetic materials and optimized core designs can improve efficiency.
- Mechanical Friction and Windage Losses: Friction and windage losses in the motor’s bearings, shaft, and rotating parts also contribute to energy losses and reduced efficiency. Proper lubrication, bearing selection, and reducing unnecessary mechanical resistance can help minimize these losses.
Efficiency is an important consideration when selecting an AC motor, as it directly impacts energy consumption and operating costs. Motors with higher efficiency consume less electrical power, resulting in reduced energy bills and a smaller environmental footprint. Additionally, higher efficiency often translates to less heat generation, which can enhance the motor’s reliability and lifespan.
Regulatory bodies and standards organizations, such as the International Electrotechnical Commission (IEC) and the National Electrical Manufacturers Association (NEMA), provide efficiency classes and standards for AC motors, such as IE efficiency classes and NEMA premium efficiency standards. These standards help consumers compare the efficiency levels of different motors and make informed choices to optimize energy efficiency.
In summary, motor efficiency is a measure of how effectively an AC motor converts electrical power into mechanical power. By selecting motors with higher efficiency, users can reduce energy consumption, operating costs, and environmental impact while ensuring reliable and sustainable motor performance.
How do AC motors contribute to the functioning of household appliances?
AC motors play a crucial role in the functioning of numerous household appliances by converting electrical energy into mechanical energy. These motors are used in a wide range of devices, powering various components and performing essential tasks. Let’s explore how AC motors contribute to the functioning of household appliances:
- Kitchen Appliances: AC motors are found in various kitchen appliances, such as refrigerators, freezers, dishwashers, and blenders. In refrigerators and freezers, AC motors drive the compressor, which circulates the refrigerant and maintains the desired temperature. Dishwashers use AC motors to power the water pumps, spray arms, and the motorized detergent dispenser. Blenders utilize AC motors to rotate the blades and blend ingredients.
- Laundry Appliances: AC motors are integral to laundry appliances like washing machines and clothes dryers. Washing machines rely on AC motors to power the agitator or the drum, facilitating the washing and spinning cycles. Clothes dryers use AC motors to rotate the drum and operate the blower fan, facilitating the drying process.
- Vacuum Cleaners: Vacuum cleaners utilize AC motors to generate suction and drive the motorized brush or beater bar. These motors power the fan or impeller, creating the necessary airflow for effective cleaning.
- Fans and Air Circulation: AC motors are employed in various types of fans, including ceiling fans, table fans, and pedestal fans. These motors drive the fan blades, producing airflow and facilitating air circulation to provide cooling or ventilation in rooms. Additionally, AC motors power exhaust fans used in kitchens, bathrooms, and range hoods to remove odors, smoke, or excess moisture.
- Air Conditioning and Heating Systems: AC motors are critical components in air conditioning and heating systems. They power the compressor, condenser fan, and blower fan, which are responsible for circulating refrigerant, dissipating heat, and delivering conditioned air throughout the house. AC motors enable the regulation of temperature and humidity levels, ensuring comfort in residential spaces.
- Garage Door Openers: AC motors are utilized in garage door openers to drive the mechanism responsible for opening and closing the garage door. These motors generate the necessary torque to lift or lower the door smoothly and efficiently.
- Other Appliances: AC motors are also found in a variety of other household appliances. For instance, they power pumps in water heaters, swimming pool filters, and sump pumps. AC motors are used in dehumidifiers, humidifiers, and air purifiers to drive the fans and other internal components. They are also present in audiovisual equipment, such as DVD players, record players, and fans used for cooling electronics.
In summary, AC motors are essential components in household appliances, enabling their proper functioning and delivering the mechanical energy required for various tasks. From kitchen appliances to laundry machines, fans, air conditioning systems, and more, AC motors provide the necessary power and functionality to enhance our daily lives.
What are the main components of an AC motor, and how do they contribute to its operation?
An AC motor consists of several key components that work together to facilitate its operation. These components include:
- Stator: The stator is the stationary part of an AC motor. It is typically made of a laminated core that provides a path for the magnetic flux. The stator contains stator windings, which are coils of wire wound around the stator core. The stator windings are connected to an AC power source and produce a rotating magnetic field when energized. The rotating magnetic field is a crucial element in generating the torque required for the motor’s operation.
- Rotor: The rotor is the rotating part of an AC motor. It is located inside the stator and is connected to a shaft. The rotor can have different designs depending on the type of AC motor. In an induction motor, the rotor does not have electrical connections. Instead, it contains conductive bars or coils that are short-circuited. The rotating magnetic field of the stator induces currents in the short-circuited rotor conductors, creating a magnetic field that interacts with the stator field and generates torque, causing the rotor to rotate. In a synchronous motor, the rotor contains electromagnets that are magnetized by direct current, allowing the rotor to lock onto the rotating magnetic field of the stator and rotate at the same speed.
- Bearing: Bearings are used to support and facilitate the smooth rotation of the rotor shaft. They reduce friction and allow the rotor to rotate freely within the motor. Bearings are typically located at both ends of the motor shaft and are designed to withstand the axial and radial forces generated during operation.
- End Bells: The end bells, also known as end covers or end brackets, enclose the motor’s stator and rotor assembly. They provide mechanical support and protection for the internal components of the motor. End bells are typically made of metal and are designed to provide a housing for the bearings and secure the motor to its mounting structure.
- Fan or Cooling System: AC motors often generate heat during operation. To prevent overheating and ensure proper functioning, AC motors are equipped with fans or cooling systems. These help dissipate heat by circulating air or directing airflow over the motor’s components, including the stator and rotor windings. Effective cooling is crucial for maintaining the motor’s efficiency and extending its lifespan.
- Terminal Box or Connection Box: The terminal box is a housing located on the outside of the motor that provides access to the motor’s electrical connections. It contains terminals or connection points where external wires can be connected to supply power to the motor. The terminal box ensures a safe and secure connection of the motor to the electrical system.
- Additional Components: Depending on the specific design and application, AC motors may include additional components such as capacitors, centrifugal switches, brushes (in certain types of AC motors), and other control devices. These components are used for various purposes, such as improving motor performance, providing starting assistance, or enabling specific control features.
Each of these components plays a crucial role in the operation of an AC motor. The stator and rotor are the primary components responsible for generating the rotating magnetic field and converting electrical energy into mechanical motion. The bearings ensure smooth rotation of the rotor shaft, while the end bells provide structural support and protection. The fan or cooling system helps maintain optimal operating temperatures, and the terminal box allows for proper electrical connections. Additional components are incorporated as necessary to enhance motor performance and enable specific functionalities.
editor by CX 2024-04-10