Item Description
Merchandise Description
Remember to distinct the pursuing concerns just before purchase!!!
one. What is the required VOLTAGE?
2. What is your needed Velocity?
three. Is your idea TORQUE really appropriate?
4. Do you have any Dimension requirement?
5. Do you have any more customization requirements?
Alright, now you can refer to our requirements of this motor below:
12V 24V Micro DC Planetary Gear Motor 600RPM 90RPM 20RPM Requirements:
Be aware : It’s just the common technological information for you reference, The specification such as voltage, velocity, torque, shaft can tailored.
Much more Information:
| Rated Voltage | 12V/24V (Customized) |
| No Load Velocity | 2-2000RPM (Customized) |
| Load Torque | one-5 kgf.cm (Changed with the Velocity and Reduction Ratio) |
| Reduction Ratio | one:3.5-1:2036 (Personalized, We can select in accordance to your required Pace) |
| Output Electrical power | 1-10W (According to the Speed and Voltage) |
| Motor Diameter | 22mm |
| Gearbox Diameter | 22mm |
| Motor Duration | 38mm |
| Gearbox Size | 13.9-28.3mm (According to the Reduction Ratio) |
| Shaft Kind | D-reduce, round or keyway (Tailored) |
Connected Products
Firm Profile
HangZhou CZPT Co. Ltd is a manufacturer and exporter of different of motors with above ten years expertise.
Our merchandise ranges consist of:
1) DC Brush motor: 6-130mm diameter, .01-1000W output electricity
two) DC Spur Gear Motor: twelve-110mm diameter, .1-300W output energy
3) DC Planeary Gear Motor: 10-82mm diameter, .1-100W output power
four) Brushless DC Motor: 28-110mm, 5-1500W output power
5) Stepper Motor: NEMA 08 to NEMA 43, Can with gearbox and direct screw
6) Servo Motor: 42mm to 130mm diameter, 50-4000w
7) AC Gear Motor: forty nine to 100mm diameter, 6-one hundred forty output power
Production Equipment
Certifications
Client Check out and Fair
FAQ
Q: What’s your major goods?
A:We currently produce Brushed Dc Motors, Brushed Dc equipment Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors and many others. You can examine the specs for over motors on our site and you can e-mail us to advise required motors for every your specification also.
Q:How to pick a suitable motor?
A:If you have motor pictures or drawings to demonstrate us, or you have comprehensive specs like voltage, speed, torque, motor size, functioning mode of the motor, needed life time and sound amount and so forth, you should do not be reluctant to enable us know, then we can advocate suitable motor for each your request appropriately.
Q: Do you have custom-made provider for your common motors?
A:Indeed, we can personalize per your ask for for the voltage, pace, torque and shaft measurement/shape. If you need added wires/cables soldered on the terminal or need to incorporate connectors, or capacitors or EMC we can make it way too.
Q:Do you have individual layout service for motors?
A:Of course, we would like to design motors independently for our clients, but it may need to have some CZPT charge and design demand.
Q:Can I have samples for testing initial?
A:Indeed, definitely you can. Following verified the needed motor specs, we will estimate and supply a proforma invoice for samples, when we get the payment, we will get a PASS from our account division to proceed samples appropriately.
Q:How do you make certain motor top quality?
A:We have our very own inspection methods: for incoming resources, we have signed sample and drawing to make confident certified incoming materials for manufacturing process, we have tour inspection in the method and final inspection to make confident experienced items just before delivery.
Q:What is actually your lead time?
A:Generally speaking, our regular common solution will want twenty five-30days, a bit longer for tailored goods. But we are quite flexible on the lead time, it will depends on the distinct orders
Q:What is your payment phrase?
A:For all our new clients, we will want 40% deposite, 60% paid prior to cargo.
Q:When will you reply after got my inquiries?
A:We will response inside 24 several hours after get your inquires.
Q:How can I trust you to make certain my money is protected?
A:We are certified by the third social gathering SGS and we have exported to above eighty five nations around the world up to June.2017. You can verify our track record with our recent consumers in your region (if our clients do not mind), or you can buy via alibaba to get trade assurance from alibaba to make certain your money is safe.
Q:What is the minimum purchase amount?
A:Our minimal buy quantity depends on diverse motor types, remember to e-mail us to check out. Also, we normally do not settle for private use motor orders.
Q:What’s your delivery approach for motors?
A:For samples and offers considerably less than 100kg, we normally suggest convey delivery For weighty offers, we typically suggest air transport or sea delivery. But it all is dependent on our customers’ demands.
Q:What certifications do you have?
A:We at present have CE and ROSH certifications.
Q:Can you send me your cost listing?
A:Because we have hundreds of different merchandise, and price varies per different specs, we are not CZPT to supply a price record. But we can estimate inside of 24 several hours when received your inquirues to make sure you can get the value in time.
Q:Can I visit your company?
A:Of course, welcome to check out our organization, but make sure you permit us know at minimum 2 weeks in progress to help us make certain no other meetings for the duration of the working day you visit us.
Thanks!
Get in touch with Us
HangZhou CZPT Co.,Ltd
Speak to Person: Celia Chen
Any email or trademanager inquires will be replied inside 24 hrs.
Normal samples can be offer you quite quickly(within ten days)
Personalized support for variety of motor accoring to your need
Professional Tchnical assistance and Right after-sale service
Sourcing motor parts like gears, encoders, cables, connectors and so on
| Application: | Universal, Industrial, Household Appliances, Power Tools, Robot, Toys, Door Lock, Monitor |
|---|---|
| Operating Speed: | Low Speed |
| Function: | Driving |
| Casing Protection: | Closed Type |
| Structure and Working Principle: | Brush |
| Certification: | ISO9001, CCC, Ce, RoHS |
###
| Samples: |
US$ 27/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Rated Voltage | 12V/24V (Customized) |
| No Load Speed | 2-2000RPM (Customized) |
| Load Torque | 1-5 kgf.cm (Changed with the Speed and Reduction Ratio) |
| Reduction Ratio | 1:3.5-1:2036 (Customized, We can choose according to your needed Speed) |
| Output Power | 1-10W (According to the Speed and Voltage) |
| Motor Diameter | 22mm |
| Gearbox Diameter | 22mm |
| Motor Length | 38mm |
| Gearbox Length | 13.9-28.3mm (According to the Reduction Ratio) |
| Shaft Type | D-cut, round or keyway (Customized) |
| Application: | Universal, Industrial, Household Appliances, Power Tools, Robot, Toys, Door Lock, Monitor |
|---|---|
| Operating Speed: | Low Speed |
| Function: | Driving |
| Casing Protection: | Closed Type |
| Structure and Working Principle: | Brush |
| Certification: | ISO9001, CCC, Ce, RoHS |
###
| Samples: |
US$ 27/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Rated Voltage | 12V/24V (Customized) |
| No Load Speed | 2-2000RPM (Customized) |
| Load Torque | 1-5 kgf.cm (Changed with the Speed and Reduction Ratio) |
| Reduction Ratio | 1:3.5-1:2036 (Customized, We can choose according to your needed Speed) |
| Output Power | 1-10W (According to the Speed and Voltage) |
| Motor Diameter | 22mm |
| Gearbox Diameter | 22mm |
| Motor Length | 38mm |
| Gearbox Length | 13.9-28.3mm (According to the Reduction Ratio) |
| Shaft Type | D-cut, round or keyway (Customized) |
Benefits of a Planetary Motor
Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.
Solar gear
The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.
Sun gear
The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.
Planetary gear
A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.
Planetary gearbox
A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.
Planetary gear motor
Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.
editor by czh 2022-12-17
