Product Description
Detailed Photos
Product Parameters
Products Description
R Series Helical Speed Reducers
R series helical gear reducer has high technological content; it adopts hardened gear surface design, which is reliable and durable and has high overload capacity.
It has the following characteristics
1,R series helical gear reducer is manufactured in accordance with international technical requirements, meeting the technical
requirements of most countries in the world.
2,The design of R series helical gear reducer plays a space-saving, high overload capacity.
3, R series helical gear reducer has low energy consumption, superior performance and high efficiency of more than 95%;
4,R series helical gear reducer has low vibration, low noise, and high energy saving;
5,R series helical gear reducer is made of high quality forged steel material, steel cast iron case, and the surface of gear is heat-treated by high frequency; reliable and durableTranslated with DeepL
R Series reducers are designed and manufactured on the basis of modular combination system.
There are a lot of motor combinations, installation forms and structural schemes. The transmission
ratio is classified and fine to meet different operating conditions, and the performance is superior.
Reinforced high rigid cast iron box; The hardened gear is made of high-quality alloy steel. Its surface
is carburized, quenched and hardened, and the gear is finely ground. It has stable transmission, low
noise, and large bearing capacity. Low temperature rise, long service life. It is widely used in metallurgy,1. Features: small offset output, compact structure, maximum use of box space, use of integral casting box, good stiffness, can improve the strength of the shaft and bearing life.
2. Installation type and output mode: bottom seated type and large and small flange type installation, CHINAMFG shaft output.
3. Input mode: direct motor, shaft input and connecting flange input.
4. Reduction ratio: secondary 5~24.8, tertiary 27.2~264, R/R combination up to 18125.
5. Average efficiency: Class II 96%, Class III 94%, R/R combination 85%.
6. The R series specially designed for mixing can bear large axial and radial forces.
Technical parameters:
Coaxial coaxial output
R reducer
Power: 0.12KW~160KW
Torque: 1.4N · m ~ 23200N · m
Output speed: 0.06 ~ 1090r/min
Model example:
R17-Y4-4P-32.40-M1-0°
R: Series code
F: Shaft extension flange installation
17: Machine model
Y: Three phase AC asynchronous motor
4: Motor power
4P: motor stage
32.40: Transmission ratio
M1: Installation type
0 °: junction box position (0 ° – 270 °)
R series helical gear hardened gear reducer
Basic model of R series reducer:
R17R27R37R47R57R67R77R87R97R107R137R147R167
RF17RF27RF37RF47RF57RF67RF77RF87RF97RF107RF137RF147RF167
RX37RX57RX67RX77RX87RX97RX107RX127RX157
RXF37RXF57RXF67RXF77RXF87RXF97RXF107RXF127RXF157
R series helical gear reducer with hard tooth surface features small size, light weight, high bearing capacity, high efficiency, long service life, convenient installation, wide motor power range, fine transmission ratio classification, etc. It can be widely used in equipment that needs to be decelerated in various industries.
sewage treatment, chemical industry, pharmacy and other industries.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Hardness: | Hardened Tooth Surface |
|---|---|
| Installation: | Horizontal Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Single-Step |
| Type: | Gear Reducer |
| Samples: |
US$ 1780/Piece
1 Piece(Min.Order) | |
|---|
What factors should be considered when selecting an AC motor for a particular application?
When selecting an AC motor for a particular application, several factors need to be considered to ensure the motor meets the requirements and performs optimally. Here are the key factors to consider:
- Power Requirements: Determine the power requirements of the application, including the required torque and speed. The motor should have adequate power output to meet the demands of the specific task. Consider factors such as starting torque, running torque, and speed range to ensure the motor can handle the load effectively.
- Motor Type: There are different types of AC motors, including induction motors, synchronous motors, and brushless DC motors. Each type has its own characteristics and advantages. Consider the application’s requirements and factors such as speed control, efficiency, and starting torque to determine the most suitable motor type.
- Environmental Conditions: Assess the environmental conditions in which the motor will operate. Factors such as temperature, humidity, dust, and vibration levels can impact motor performance and longevity. Choose a motor that is designed to withstand the specific environmental conditions of the application.
- Size and Space Constraints: Consider the available space for motor installation. Ensure that the physical dimensions of the motor, including its length, diameter, and mounting arrangement, are compatible with the available space. Additionally, consider the weight of the motor if it needs to be mounted or transported.
- Efficiency: Energy efficiency is an important consideration, as it can impact operational costs and environmental sustainability. Look for motors with high efficiency ratings, which indicate that they convert electrical energy into mechanical energy with minimal energy loss. Energy-efficient motors can lead to cost savings and reduced environmental impact over the motor’s lifespan.
- Control and Speed Requirements: Determine if the application requires precise speed control or if a fixed speed motor is sufficient. If variable speed control is needed, consider motors that can be easily controlled using variable frequency drives (VFDs) or other speed control mechanisms. For applications that require high-speed operation, select a motor that can achieve the desired speed range.
- Maintenance and Serviceability: Assess the maintenance requirements and serviceability of the motor. Consider factors such as the accessibility of motor components, ease of maintenance, availability of spare parts, and the manufacturer’s reputation for reliability and customer support. A motor that is easy to maintain and service can help minimize downtime and repair costs.
- Budget: Consider the budget constraints for the motor selection. Balance the desired features and performance with the available budget. In some cases, investing in a higher quality, more efficient motor upfront can lead to long-term cost savings due to reduced energy consumption and maintenance requirements.
By carefully considering these factors, it is possible to select an AC motor that aligns with the specific requirements of the application, ensuring optimal performance, efficiency, and reliability.
Are there energy-saving technologies or features available in modern AC motors?
Yes, modern AC motors often incorporate various energy-saving technologies and features designed to improve their efficiency and reduce power consumption. These advancements aim to minimize energy losses and optimize motor performance. Here are some energy-saving technologies and features commonly found in modern AC motors:
- High-Efficiency Designs: Modern AC motors are often designed with higher efficiency standards compared to older models. These motors are built using advanced materials and optimized designs to reduce energy losses, such as resistive losses in motor windings and mechanical losses due to friction and drag. High-efficiency motors can achieve energy savings by converting a higher percentage of electrical input power into useful mechanical work.
- Premium Efficiency Standards: International standards and regulations, such as the NEMA Premium® and IE (International Efficiency) classifications, define minimum energy efficiency requirements for AC motors. Premium efficiency motors meet or exceed these standards, offering improved efficiency compared to standard motors. These motors often incorporate design enhancements, such as improved core materials, reduced winding resistance, and optimized ventilation systems, to achieve higher efficiency levels.
- Variable Frequency Drives (VFDs): VFDs, also known as adjustable speed drives or inverters, are control devices that allow AC motors to operate at variable speeds by adjusting the frequency and voltage of the electrical power supplied to the motor. By matching the motor speed to the load requirements, VFDs can significantly reduce energy consumption. VFDs are particularly effective in applications where the motor operates at a partial load for extended periods, such as HVAC systems, pumps, and fans.
- Efficient Motor Control Algorithms: Modern motor control algorithms, implemented in motor drives or control systems, optimize motor operation for improved energy efficiency. These algorithms dynamically adjust motor parameters, such as voltage, frequency, and current, based on load conditions, thereby minimizing energy wastage. Advanced control techniques, such as sensorless vector control or field-oriented control, enhance motor performance and efficiency by precisely regulating the motor’s magnetic field.
- Improved Cooling and Ventilation: Effective cooling and ventilation are crucial for maintaining motor efficiency. Modern AC motors often feature enhanced cooling systems, including improved fan designs, better airflow management, and optimized ventilation paths. Efficient cooling helps prevent motor overheating and reduces losses due to heat dissipation. Some motors also incorporate thermal monitoring and protection mechanisms to avoid excessive temperatures and ensure optimal operating conditions.
- Bearings and Friction Reduction: Friction losses in bearings and mechanical components can consume significant amounts of energy in AC motors. Modern motors employ advanced bearing technologies, such as sealed or lubrication-free bearings, to reduce friction and minimize energy losses. Additionally, optimized rotor and stator designs, along with improved manufacturing techniques, help reduce mechanical losses and enhance motor efficiency.
- Power Factor Correction: Power factor is a measure of how effectively electrical power is being utilized. AC motors with poor power factor can contribute to increased reactive power consumption and lower overall power system efficiency. Power factor correction techniques, such as capacitor banks or power factor correction controllers, are often employed to improve power factor and minimize reactive power losses, resulting in more efficient motor operation.
By incorporating these energy-saving technologies and features, modern AC motors can achieve significant improvements in energy efficiency, leading to reduced power consumption and lower operating costs. When considering the use of AC motors, it is advisable to select models that meet or exceed recognized efficiency standards and consult manufacturers or experts to ensure the motor’s compatibility with specific applications and energy-saving requirements.
Can you explain the basic working principle of an AC motor?
An AC motor operates based on the principles of electromagnetic induction. It converts electrical energy into mechanical energy through the interaction of magnetic fields. The basic working principle of an AC motor involves the following steps:
- The AC motor consists of two main components: the stator and the rotor. The stator is the stationary part of the motor and contains the stator windings. The rotor is the rotating part of the motor and is connected to a shaft.
- When an alternating current (AC) is supplied to the stator windings, it creates a changing magnetic field.
- The changing magnetic field induces a voltage in the rotor windings, which are either short-circuited conductive bars or coils.
- The induced voltage in the rotor windings creates a magnetic field in the rotor.
- The magnetic field of the rotor interacts with the rotating magnetic field of the stator, resulting in a torque force.
- The torque force causes the rotor to rotate, transferring mechanical energy to the connected shaft.
- The rotation of the rotor continues as long as the AC power supply is provided to the stator windings.
This basic working principle is applicable to various types of AC motors, including induction motors and synchronous motors. However, the specific construction and design of the motor may vary depending on the type and intended application.
editor by CX 2024-04-12
China Professional Best Price High Torque PA140 Helical Gear Planetary Gearbox Speed Reducer with Hot selling
Product Description
Best Price High Torque PA140 Helical Gear Planetary Gearbox Speed Reducer
The high-precision planetary gearbox adopts spur gear design, and is used in various control transmission fields with servo motors, such as precision machine tools, laser cutting equipment, battery processing equipment, etc. It has the advantages of large torsional rigidity and large output torque.
*PA series helical gear shaft output planetary reducer
*PX series helical gear shaft output planetary reducer
*PG series helical gear flange output planetary reducer
*PW series helical gear shaft output planetary reducer
*PXR series helical gear right angle planetary reducer
*PAR series helical gear right angle planetary reducer
*PRF series spur gear shaft output planetary reducer
*PRL series spur gear shaft output planetary reducer
*PRN series spur gear flange output planetary reducer
*PFN series spur gear square output planetary reducer
*PVFN series spur gear 90 degree right angle planetary reducer
*PVLN series spur gear 90 degree right angle planetary reducer
Product Parameters
| Specifications | PA60 | PA90 | PA120 | PA140 | PA180 | PA220 | |||
| Technal Parameters | |||||||||
| Max. Torque | Nm | 1.5times rated torque | |||||||
| Emergency Stop Torque | Nm | 2.5times rated torque | |||||||
| Max. Radial Load | N | 1530 | 3250 | 6700 | 9400 | 14500 | 16500 | ||
| Max. Axial Load | N | 630 | 1300 | 3000 | 4700 | 7250 | 8250 | ||
| Torsional Rigidity | Nm/arcmin | 6 | 12 | 23 | 47 | 130 | 205 | ||
| Max.Input Speed | rpm | 8000 | 6000 | 6000 | 6000 | 6000 | 3000 | ||
| Rated Input Speed | rpm | 4000 | 3000 | 3000 | 3000 | 3000 | 1500 | ||
| Noise | dB | ≤58 | ≤60 | ≤65 | ≤68 | ≤68 | ≤72 | ||
| Average Life Time | h | 20000 | |||||||
| Efficiency Of Full Load | % | L1≥95% L2≥90% | |||||||
| Return Backlash | P1 | L1 | arcmin | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 |
| L2 | arcmin | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ||
| P2 | L1 | arcmin | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | |
| L2 | arcmin | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ||
| Moment Of Inertia Table | L1 | 3 | Kg*cm2 | 0.16 | 0.61 | 3.25 | 9.21 | 28.98 | 69.7 |
| 4 | Kg*cm2 | 0.14 | 0.48 | 2.74 | 7.54 | 23.67 | 54.61 | ||
| 5 | Kg*cm2 | 0.13 | 0.47 | 2.71 | 7.42 | 23.29 | 53.51 | ||
| 7 | Kg*cm2 | 0.13 | 0.45 | 2.62 | 7.14 | 22.48 | 50.92 | ||
| 8 | Kg*cm2 | 0.13 | 0.45 | 2.6 | 7.14 | / | / | ||
| 10 | Kg*cm2 | 0.13 | 0.4 | 2.57 | 7.03 | 22.51 | 50.18 | ||
| L2 | 12 | Kg*cm2 | 0.13 | 0.45 | 0.45 | 2.63 | 7.3 | 23.59 | |
| 15 | Kg*cm2 | 0.13 | 0.45 | 0.45 | 2.63 | 7.3 | 23.59 | ||
| 20 | Kg*cm2 | 0.13 | 0.45 | 0.45 | 2.63 | 6.92 | 23.33 | ||
| 25 | Kg*cm2 | 0.13 | 0.45 | 0.4 | 2.63 | 6.92 | 22.68 | ||
| 28 | Kg*cm2 | 0.13 | 0.45 | 0.45 | 2.43 | 6.92 | 23.33 | ||
| 30 | Kg*cm2 | 0.13 | 0.45 | 0.45 | 2.43 | 7.3 | 25.59 | ||
| 35 | Kg*cm2 | 0.13 | 0.4 | 0.4 | 2.43 | 6.92 | 22.68 | ||
| 40 | Kg*cm2 | 0.13 | 0.45 | 0.45 | 2.43 | 6.92 | 23.33 | ||
| 50 | Kg*cm2 | 0.13 | 0.4 | 0.4 | 2.39 | 6.92 | 22.68 | ||
| 70 | Kg*cm2 | 0.13 | 0.4 | 0.4 | 2.39 | 6.72 | 22.68 | ||
| 100 | Kg*cm2 | 0.13 | 0.4 | 0.4 | 2.39 | 6.72 | 22.68 | ||
| Technical Parameter | Level | Ratio | PA60 | PA90 | PA120 | PA140 | PA180 | PA220 | |
| Rated Torque | L1 | 3 | Nm | 40 | 105 | 165 | 360 | 880 | 1100 |
| 4 | Nm | 45 | 130 | 230 | 480 | 880 | 1800 | ||
| 5 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 7 | Nm | 45 | 100 | 220 | 480 | 1100 | 1600 | ||
| 8 | Nm | 40 | 90 | 200 | 440 | / | / | ||
| 10 | Nm | 30 | 75 | 175 | 360 | 770 | 1200 | ||
| L2 | 12 | Nm | 40 | 105 | 165 | 360 | 880 | 1100 | |
| 15 | Nm | 40 | 105 | 165 | 360 | 880 | 1100 | ||
| 20 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 25 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 28 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 30 | Nm | 40 | 105 | 165 | 360 | 880 | 1100 | ||
| 35 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 40 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 50 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 70 | Nm | 45 | 100 | 220 | 480 | 1100 | 1600 | ||
| 100 | Nm | 30 | 75 | 175 | 360 | 770 | 1200 | ||
| Degree Of Protection | IP65 | ||||||||
| Operation Temprature | ºC | – 10ºC to -90ºC | |||||||
| Weight | L1 | kg | 1.25 | 3.75 | 8.5 | 16 | 28.5 | 49.3 | |
| L2 | kg | 1.75 | 5.1 | 12 | 21.5 | 40 | 62.5 | ||
Company Profile
Packaging & Shipping
1. Lead time: 7-10 working days as usual, 20 working days in busy season, it will be based on the detailed order quantity;
2. Delivery: DHL/ UPS/ FEDEX/ EMS/ TNT
FAQ
1. who are we?
Hefa Group is based in ZheJiang , China, start from 1998,has a 3 subsidiaries in total.The Main Products is planetary gearbox,timing belt pulley, helical gear,spur gear,gear rack,gear ring,chain wheel,hollow rotating platform,module,etc
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.how to choose the suitable planetary gearbox?
First of all,we need you to be CZPT to provide relevant parameters.If you have a motor drawing,it will let us recommend a suitable gearbox for you faster.If not,we hope you can provide the following motor parameters:output speed,output torque,voltage,current,ip,noise,operating conditions,motor size and power,etc
4. why should you buy from us not from other suppliers?
We are a 22 years experiences manufacturer on making the gears, specializing in manufacturing all kinds of spur/bevel/helical gear, grinding gear, gear shaft, timing pulley, rack, planetary gear reducer, timing belt and such transmission gear parts
5. what services can we provide?
Accepted Delivery Terms: Fedex,DHL,UPS;
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union;
Language Spoken:English,Chinese,Japanese
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car, Automation Equipment |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Bevel Gear |
| Step: | Double-Step |
| Samples: |
US$ 350/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
The Benefits of Using a Gear Motor
A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.
Electric motor
The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Gear reducer
A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor shaft
Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
First stage gears
The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.
editor by CX 2023-11-15
in Ibadan Nigeria sales price shop near me near me shop factory supplier Jiangyin Gearbox Dfy Bevel and Cylindrical Gear Reducer manufacturer best Cost Custom Cheap wholesaler
Our specialists and engineers have 23 years of Experience in the Bearing Market. The team is focused on making all assortment of normal roller chains and sprockets, gears & gearboxes, such as conveyor chain & sprockets , stainless metal chain, agricultural chain and has not just bought its goods all more than china, but also offered more than 65% items to oversees, like Europe, The usa, South-east Asia, and it also has established up storage logistics in places like Europe. If you are intrigued in any of our goods or would like to talk about a likely get, make sure you feel totally free to get in touch with us. EPTTngyin EPTT DFY EPTTl and Cylindrical EPT EPTT
EPTT Profile:
With over thirty years’ encounter in the market, EPTTngyin EPTT EPT EPTT, Ltd is a specialist designer and producer of difficult tooth area EPTTes, which is also a director device of EPTT EPT EPTTry Market Association.
The company’s principal products incEPTT cylinEPTTEPTT series (ZDY, ZLY, ZSY), conical cylinEPTTEPT EPTT collection (DBY, DCY), stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd modularized blended EPT motor sequence (JCH, JCB), JCP sequence planetary EPT EPTT, JCK collection helical-EPTTl EPT EPTT, TY sequence coaXiHu (West EPT) Dis.al challenging tooth surface area EPT EPTT and some committed EPTTes, which are widely utilized in rubber and plastic, ports, metallurgy, mining, constructing materials, petrochemical, and other EPTT.
The business continually introduces domestic and international EPTd manufacturing gear and processing EPT, with all varieties of massive and medium-sized CNC hobbing EPTT, CNC profile grinding EPTT, CNC machining cEPTTr, with specialist system box-kind multi-objective furnace and pit- kind carburizing furnace, EPT tests cEPTTr and other EPTd processing and testing gear.
The firm has estabEPTTd the mechanical research establishment with professional and technical elite. Our constant analysis and deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment is for providing exceptional first-class EPT EPTT equipment for our customers Nation-vast marketing and advertising and provider network is to guarantee ideal right after-sales provider.
Item Description
EPTTl and Cylindrical EPT EPTT incEPTTs 3 series. DBY (two phase), DCY (3 phase), DFY (four phase). It is a EPT system of exterior mesh EPT on enter and output shaft in verticality. The major EPT elements undertake large-top quality ally steel. The EPT reaches the precision quality six (EPTT0095-88) right after it goes via carburizing, quenching and EPT grinding. It attributes substantial carrying capacity, EPTT provider existence, tiny quantity, large efficiency and ligEPTT excess weight.
It is a EPT mechanism of input and output shaft in verticality. They mainly implement to belt conveyer and other sorts of conveying products, They also can use to numerous varieties of EPTT EPTTry in the subject of metallurgy, mining, chemical engineering, coal mining, building resources, ligEPTT industry, oil refining, etc…
HOW TO Get in touch with US?
Ship your Inquiry Particulars in the Below, click on quotSend quot Now!
Also you can speak to us through adhering to methods:
Tel 15358026079
Web site:
in Agartala India sales price shop near me near me shop factory supplier IEC Mounting Dimensions Worm Reducer with Aluminium Alloy Housing manufacturer best Cost Custom Cheap wholesaler
In 2000, EPG took the guide in gaining ISO14001 atmosphere administration certificate and thereafter passed the inspection of clear generation and recycling economic climate, successful the title of “Zhejiang Green Company”. There is a complex heart of province stage, EPG academician doing work station, experiment station for EPG publish medical doctors, and countrywide 863 plan established up in EPG team. With these platforms and robust technological potential, the more than four hundred technicians have produced all range of unique higher exact and substantial strength goods, executed mildew programs for essential factors in the car and countrywide industry revitalizing program, ensuing more than 5000 developed in excess of, amid which 33 objects are autonomous patent technologies with four patent approved . focus in energy transmission items, CATV products, mechanical seal, hydraulic and Pheumatic, and advertising items. Solution INTRODUCTION:
Primary Features:
1) Made of large good quality EPT alloy, ligEPTT weigEPTT and non-rusting
two) Big output torque and higher radiating efficiency 3) EPT operating and minimal sounds, can operate EPTT time in dreadful problem
four) Good-hunting physical appearance, durable support existence and little volume
five) Appropriate for omnibearing set up
Primary Materials:
1)housing: aluminium alloy ADC12(dimension 571-090) die cast iron EPTT200(dimensions one hundred ten-a hundred and fifty)
two)Worm:20Cr, ZI Involute profile carbonize ampquencher heat treatment make EPT surface hardness up to fifty six-62 EPTC Following precision grinding, carburization layer’s thickness among .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-one
Solution PARAMETERS:
| Dimension | Specification | EPTT ratio | |||||||||||||
| IEC | N | M | P | 7.five | 10 | fifteen | twenty | 25 | thirty | 40 | fifty | sixty | 80 | 100 | |
| D | |||||||||||||||
| 25 | 56B14 | fifty | 65 | 80 | nine | nine | nine | nine | nine | 9 | nine | 9 | 9 | ||
| 30 | 63B5 | 95 | 115 | one hundred forty | eleven | eleven | 11 | 11 | eleven | eleven | eleven | eleven | |||
| 63B14 | sixty | 75 | ninety | ||||||||||||
| 56B5 | eighty | one hundred | a hundred and twenty | nine | nine | nine | 9 | 9 | 9 | 9 | 9 | nine | nine | ||
| 56B14 | 50 | sixty five | 80 | 9 | 9 | nine | 9 | 9 | nine | 9 | 9 | 9 | 9 | ||
| 40 | 71B5 | a hundred and ten | a hundred thirty | 160 | fourteen | fourteen | 14 | 14 | fourteen | 14 | 14 | 14 | |||
| 71B14 | 70 | eighty five | one zero five | ||||||||||||
| 63B5 | 95 | one hundred fifteen | one hundred forty | eleven | eleven | eleven | 11 | eleven | eleven | 11 | eleven | eleven | 11 | 11 | |
| 63B14 | sixty | 75 | 90 | ||||||||||||
| 56B5 | eighty | one hundred | a hundred and twenty | nine | 9 | 9 | nine | ||||||||
| fifty | 80B5 | 130 | 165 | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | – | – | – | – |
| 80B14 | 80 | a hundred | 120 | ||||||||||||
| 71B5 | a hundred and ten | 130 | 160 | fourteen | fourteen | fourteen | 14 | 14 | fourteen | 14 | 14 | fourteen | 14 | – | |
| 71B14 | 70 | 85 | 105 | ||||||||||||
| 63B5 | 95 | a hundred and fifteen | one hundred forty | – | – | – | – | – | – | – | 11 | eleven | eleven | 11 | |
| sixty three | 90B5 | 130 | a hundred sixty five | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | – | – | – |
| 90B14 | ninety five | 115 | a hundred and forty | ||||||||||||
| 80B5 | a hundred thirty | a hundred sixty five | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | – | |
| 80B14 | 80 | 100 | a hundred and twenty | ||||||||||||
| 71B5 | 110 | a hundred thirty | 160 | – | – | – | – | – | – | 14 | fourteen | 14 | 14 | 14 | |
| 71B14 | 70 | 85 | 105 | ||||||||||||
| 75 | 100/112B5 | 180 | 215 | 250 | 28 | 28 | 28 | – | – | – | – | – | – | – | – |
| one hundred/112B14 | one hundred ten | one hundred thirty | a hundred and sixty | ||||||||||||
| 90B5 | a hundred thirty | 165 | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | ||||
| 90B14 | ninety five | one hundred fifteen | a hundred and forty | ||||||||||||
| 80B5 | a hundred thirty | 165 | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | ||||
| 80B14 | 80 | one hundred | one hundred twenty | ||||||||||||
| 71B5 | 110 | a hundred thirty | one hundred sixty | 14 | fourteen | fourteen | fourteen | ||||||||
| 90 | 100/112B5 | one hundred eighty | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | – | – | – | – | – |
| one hundred/112B14 | one hundred ten | one hundred thirty | a hundred and sixty | ||||||||||||
| 90B5 | 130 | a hundred sixty five | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | ||
| 90B14 | 95 | a hundred and fifteen | 140 | ||||||||||||
| 80B5 | one hundred thirty | one hundred sixty five | two hundred | 19 | 19 | 19 | 19 | 19 | |||||||
| 80B14 | eighty | one hundred | a hundred and twenty | ||||||||||||
| a hundred and ten | 132B5 | 230 | 265 | 300 | 38 | 38 | 38 | 38 | – | – | – | ||||
| one hundred/112B5 | a hundred and eighty | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | |||
| 100/112B14 | one hundred ten | 130 | 160 | ||||||||||||
| 90B5 | one hundred thirty | a hundred sixty five | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | |||||
| 80B5 | a hundred thirty | one hundred sixty five | 200 | 19 | 19 | ||||||||||
| 130 | 132B5 | 230 | 265 | 300 | 38 | 38 | 38 | 38 | 38 | 38 | 38 | – | – | – | |
| 100/112B5 | 180 | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | |||||
| one hundred/112B14 | 110 | one hundred thirty | a hundred and sixty | ||||||||||||
| 90B5 | 130 | one hundred sixty five | two hundred | 24 | 24 | ||||||||||
| 150 | 160B5 | 250 | three hundred | 350 | 42 | 42 | 42 | 42 | forty two | – | – | – | – | – | – |
| 132B5 | 230 | 265 | 300 | 38 | 38 | 38 | 38 | 38 | 38 | ||||||
| a hundred/112B5 | one hundred eighty | 215 | 250 | 28 | 28 | 28 | 28 | ||||||||
Product Define Proportions:
Company Transient INTRODUCTION:
We are a skilled EPTT company positioned in EPTTizhou, EPTT province.
Our major products is total selection of RV571-a hundred and fifty worm EPTTs , also provided hypoid helical EPTT, Computer models, UDL Variators and AC EPTs.
EPT are broadly utilized for apps such as: foodstuffs, EPT, EPTT, substances, pharmacy, plastics, paper-generating, construction EPTTry, metallurgic EPT, environmental protection engineering, and all types of automatic strains, and assembly lines.
With rapidly shipping and delivery, exceptional following-income provider, EPTd producing faXiHu (West EPT) Dis.Hu (West EPT) Dis.ty, our items offer well the two at property and abroad. We have exported our EPTTs to SouthEPT Asia, EPTern Europe and the Center EPT and so on.Our goal is to deveXiHu (West EPT) Dis.Hu (West EPT) Dis. and innovate on the foundation of large top quality, and EPT a very good reputation for EPTTs.
WORKSHOP:
EXHIBITIONS:
FAQ:
1.Q:Can you make as for each consumer drawing?
A: Indeed, we offer EPT services for clients accordingly. We can use customer’s nameplate for EPTTes.
two.Q:What is your phrases of payment ?
A: 30% deposit ahead of manufacturing,stability T/T just before shipping and delivery.
three.Q:Are you a trading firm or manufacturer?
A:We are a manufacurer with EPTd equipment and seasoned workers.
4.Q:What is actually your manufacturing capability?
A:8000-9000 PCS/Month
four.Q:What is your MOQ?
A: one pcs
5.Q:Totally free sample is available or not?
A:Indeed, we can supply cost-free sample if buyer agree to spend for the courier EPT
six.Q:Do you have any certificate?
A:Yes, we have CE certification and SGS certificate report.
Make contact with information:
Ms Lingel Pan
For any questions just truly feel totally free ton contact me. Several thanks for your variety interest to our business!
in Bangui Central African Republic sales price shop near me near me shop factory supplier Nmrv110 Worm Gear Reducer Worm Gearmotor Speed Reducer Worm Gearbox for Agriculture Feeding Machine manufacturer best Cost Custom Cheap wholesaler
With several years’ experience in these traces, we have been distinguished from other suppliers in China by our rewards in aggressive pricing, on-time shipping and delivery, prompt responses, on-hand engineering help and excellent soon after-product sales services. Services & Top quality controlWe source thorough drawings and supply each time required. The team has taken part in the making and revising of ISO/TC100 intercontinental chain normal numerous a long time in success and hosted the sixteenth ISO/TC100 Global once-a-year assembly in 2004.
Nmrv110 Worm EPT EPTT Worm EPTmotor Pace EPTT Worm EPTT for EPTT Feeding EPTT
NMRV Utilized Maritime EPTT
one. Mad of substantial-top quality EPT alloy,ligEPTT weigEPTT and non-rusting
2. Big output torque
3. EPT in running and reduced in noise,can perform EPTT time in dreadful problems.
four. EPT in radiating efficiency.
five. Very good-hunting in visual appeal,resilient in support life and small in quantity.
six. Appropriate for omnibearing set up.
| Model No.: | NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150, NMRV185 |
| Ratio: | 5, seven.five, 10, fifteen, 20, twenty five, thirty, forty, fifty, sixty, 80, a hundred |
| EPTT: | EPTT(Ral5571)/Silver Gray (RAL7031) Or On Buyer Request |
| EPT: | EPT: Measurement twenty five-a hundred and ten Is EPTT Alloy, Measurement a hundred and ten-one hundred fifty Is Forged-Iron |
| Worm Wheel: ZCuSn10Pb1 | |
| Worm:20Cr | |
| Pinion:Tin Bronze | |
| Output Shaft: Metal-forty five# | |
| Usages: | EPTT EPTT: Food Things, EPTT, EPTT, EPTT, Dyeing,EPT working, Glass. |
| IEC Flange: | IEC StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd Flange, NEMA flange, servo motor adaptor Or On Buyer Request |
| electric motor |
| motor |
| EPTed motor |
| EPT |
| EPTT EPTT |
| EPT box |
| spare areas |
| EPT motor |
| EPTed motor |
| EPTT |
EPTT information
EstabEPTTd in 1985, EPT EPTT EPTTRY EPTT, LTD is a large and new EPT EPTTrprise engaging in research, deveXiHu (West EPT) Dis.Hu (West EPT) Dis. and manufacture for EPTT amp speed variator, a single of the director member of EPTT EPTT Association of EPTT EPTT EPTTry.
It covers far more than forty,000 sq. meters, has more than 400 workers , 20% of whom are technicians, geared up with much more than three hundred sets the most EPTd precise numerical manage tools, incXiHu (West EPT) Dis.Hu (West EPT) Dis. German HOFLER forming EPT grinding EPTT to boost good quality.
set up much more than thirty nationwide income branches to provide our clients in time and completely.
Our products also exported to much more than thirty nations around the world principal in Europe, Asia The united states, and Africa, with substantial track record.
EPTT manage
EPTT
Related EPTT sorts
| EPT Planetary EPTT | Robot RV EPTT pace EPTT |
| Custom manufactured Non-stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd EPTT | UDL Sequence Variator |
| PYZ Collection EPTcal Tooth Shaft Mounted EPTT | 8000 Series Cycloidal EPTT |
| SLT Collection Spiral EPTTl EPTT | SLSWL Sequence Worm Screw Jack |
| SLP Collection Planetary EPTT | SLH/SLB Series EPT EPTT EPTT |
| NMRV Collection Worm EPTT | BKM Sequence EPTcal-hypoid EPTT |
| SLRC Series EPTcal EPTT | SLEPTR Collection Shaft Mounted EPTT |
| SLXG Collection Shaft Mounted EPTT | X/B Collection Cycloidal EPTT |
| SLR/SEPTT/SLK/SLS Series EPTcal EPTT | AC/DC EPT |
Major merchandise checklist: sixteen sequence incXiHu (West EPT) Dis.Hu (West EPT) Dis. SLR/SLS/SLK/SEPTT sequence tough tooth flank EPT EPTT , SLRC collection aluminium scenario helical EPT EPTTs,SLHSLB series substantial EPTT pace EPTT, SLP collection planetary velocity EPTT, X/B series cycloidal EPTT, SLXG series shaft-mounted EPT box, SLSWL sequence worm screw jack, SLT series helical cone EPT box, completely far more than ten,000 ratios, a variety of specification make us at the head of domestic EPTT industry, broadly provide the mechanical EPTT area of ligEPTT amp hefty business this kind of as: beer amp EPTTrage, mining EPTT, foodstuff EPTT, textile printing, rubber amp plastic substance, petrochemical sector, jack-up transportation, pharmacy amp process hides, environmental safety products.
Certification
FAQ
one.Payment Expression: TT, L/C
2.Shipping time: about thirty daEPTTfrom EPT payment.
3.We acknowledge EPT items as for every your EPTT prerequisite.
4.XiHu (West EPT) Dis.hu (West EPT) Dis.traces for the Assortment:Generally we can choose one EPTT which is appropriate for you with some informations from you,these kinds of as ratio/motor speed/mounting dimension/ out torque and so forth.
5.If the minimum orEPTTamount is in excess of $10000, there are preferential.
Q1: What information ought to I tell you to confirm the item?
A:Product/Measurement, EPTT Ratio, Shaft instructions amp OrEPTTquantity.
Q2: What can i do if I will not know which a single EPT?
A:Dont be concerned, Send out as considerably information as you can, our group will help you locate the rigEPTT one you are hunting for.
Q3: What is your product guarantee time period?
A:We provide a single calendar year guarantee considering that the vessel departure day still left EPTT.
This fall: Are you investing company or company ?
A: We are manufacturing unit.
Q5: How EPTT is your supply time?
A: EPTTly it is five-ten daEPTTif the products are in inventory. or it is 15-twenty daEPTTif the items are not in inventory, it is according to amount.
Q6: Do you supply samples ? is it free of charge or extra ?
A: Yes, we could provide the sample for cost-free charge but do not spend the EPT of freight.
Q7: What is your phrases of payment ?
A: Payment lt=1000USD, 100% in EPT. Payment gt=1000USD, 30% T/T in EPT ,equilibrium prior to shippment.
If you have an additional issue, pls come to feel free to get in touch with us as below:
Speak to Us
in Concepcion Chile sales price shop near me near me shop factory supplier Bw Single-Step Cycloidal Stainless Steel Horizontal Pinwheel Motor Reducer manufacturer best Cost Custom Cheap wholesaler
Our AdvantagesProducts Massive volume in Stock, No MOQ essential We comply with all the international requirements, this kind of as ISO9001 and TS16949 specifications. Our major products are Needle Roller bearings, Cylindrical Roller Bearings, Rod conclude Bearings, Spherical simple bearings, Observe roller Bearings for Guideway, Roller Bearings, Blend Bearings for forklifts, H2o Pump Bearings, SNR Vehicle Bearings and all kinds of Spherical Bearings. In this way, our products have ongoing to obtain industry acceptance and clients pleasure more than the earlier few years.
XWD2/ XWD3/XWD4/XWD5/XWD6/XWD7 /XWD8 EPTT with ac motor
Cycloidal EPTT adopts meshing cycloid pin EPT, planetary EPTT basic principle, so generally also named planetary cycloid EPTT. Planetary cycloidal EPTT can be extensively employed in petroleum, environmental security, chemical, cement, transport, textile, pharmaceutical, food, printing, lifting, mining, metallurgy, development, EPTT era and other EPTT.
As a EPT or reduction EPT, the EPTT is divided into horizontal, vertical, biaXiHu (West EPT) Dis.al and straigEPTT league assembly way,and so forth. Its EPT steady structure can exchange ordinary cylindrical EPT EPTT and worm EPT EPTT in a lot of situations. As a result, planetary cycloid EPT EPTT is commonly used in various EPTT and fields, and is EPTTly welcomed by the vast majority of end users.
XWD/BWY cycloid EPTT motor particulars:
B collection:
BW basedoard horizontal set up double axes sort
BL flange vertical installed double axes sort
BWY basedoard horizontal put in motor immediate-connection sort
BLY flange vertical mounted motor direct-relationship type
X collection:
XW basedoard horizontal put in double axes kind
XL flange vertical put in double axes type
XWD basedoard horizontal put in motor immediate-link sort
XLD flange vertical put in motor immediate-relationship type
FAQ
one, Q:what’s your MOQ for ac EPEPT ?
A: 1pc is alright for each kind electric powered EPT box motor
2, Q: What about your warranty for your induction speed EPEPT ?
A: 1 12 months ,but apart from gentleman-created ruined
three, Q: which payment way you can settle for ?
A: TT, western union .
4, Q: how about your payment way ?
A: a hundred%payment in EPTd less $5000 ,thirty% payment in EPTd payment , 70% payment prior to sending in excess of $5000.
five, Q: how about your EPTT of speed reduction motor ?
A: plywood scenario ,if measurement is modest ,we will pack with pallet for significantly less one container
6, Q: What information need to be presented, if I acquire electric helical EPTed motor from you ?
A: rated EPTT, ratio or output speed,kind ,voltage , mounting way , quantity , if more is EPT ,
in Tainan China, Taiwan Province of China sales price shop near me near me shop factory supplier Wps155 Worm Reducer Shaft Gearbox for Packing Machine manufacturer best Cost Custom Cheap wholesaler
We inspect every single piece of bearing by ourselves before supply. Our solution range contains all varieties of helical equipment, spur equipment, bevel equipment, equipment rack, worm gear, sprockets,chains, bearings. We will supply very best solutions and higher quality goods with all sincerity.
gt Merchandise Introduction
Wpw Worm Worm Reductor
one, WP series worm EPTT ‘s the EPTT easy, vibration, EPT and sound are tiny, a big reduction ratio, extensive versaEPTTty, with all sorts of mechanical equipment.
2, WPA collection speed EPTT are ready to acquire a more substantial solitary-stage EPTT EPT ratio, compact, most designs have EPT EPT self-locking, braking requirements for mechanical gear can help save brakes
3, worm thread engagement with the worm EPT tooth surface area friction loss increased than the EPT EPTT performance and as a result minimal, straightforward to warmth and greater temperatures.
4, interworking good worm manufactured in accordance to countrywide stXiHu (West EPT) Dis.Hu (West EPT) Dis.rds, bearings, seals and so forth with stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd parts. five,
five, box variety basic sort (vertical or horizontal box for two buildings with bottom foot) and the EPT type (box is rectangular, multi-faceted with fastened screw, not equipped with base foot or the other stop foot and other structural variety)
six, WP series EPT box enter shaft coupling strategies are the simple type (solitary input shaft and dual enter shaft), two motor with flange.
7, WP series EPTT ‘ output, place and path of the enter shaft and the enter shaft on the up coming the output aXiHu (West EPT) Dis.s and down the enter shaft and down.
eight, WP collection worm EPTT can be two or three sets consisting of multi stage EPT EPTT to get great EPT ratio.
| Variety: | WP EPTs reduction EPT |
| Product: | WPA40-250 |
| Ratio: | 10,fifteen,twenty,25,thirty,forty,fifty,60 |
| EPTT: | Eco-friendly,Brown |
| EPT: | Cast iron physique |
| Worm EPT- Cooper-ten-three # | |
| Worm-20CrMnTi with carburizing and quenching, area hardness is 56-62EPTC | |
| Shaft-chromium steel-forty five# | |
| EPTT: | Paper EPTT,Plywood box / for every established(With foam board inside of) |
| Warranty: | 1 calendar year |
| Enter EPTT: | .55kw,.75kw,one.1kw,one.5kw,2.2kw,4kw,5.5kw,7.5kw |
| Usages: | In EPTT EPTT: Foodstuff things,EPTT,chemical, aswell as EPTT, printing, dyeing,woodworking, EPT and plastics #8230.. |
| IEC Flange: | 80B5,90B5,100B5,112B5,132B5…. |
| Lubricant: | Artificial amp Mineral |
gt Catalogue
gt Our EPT Benefits
one. Reasonable price tag with excellent quality
2.Every single one tests cautiously
three.Distinct nameplate
four.Trustworthy deal
5.EPT efficiency, clean runingand lower noise
six.EPTT resources make best functionality
gt Producing Procedure
gt WORKSHOP EPT:
CERTIFICATION :
gt EPTAGE :
for a single container, right loading ,for less, all goods with pallet,
FAQ
FAQ
1, Q:what is actually your MOQ for ac EPEPT ?
A: 1pc is alright for each kind electric EPT box motor
two, Q: What about your guarantee for your induction velocity EPEPT ?
A: one yr ,but other than male-manufactured wrecked
three, Q: which payment way you can accept ?
A: TT, western union .
4, Q: how about your payment way ?
A: a hundred%payment in EPTd less $5000 ,30% payment in EPTd payment , 70% payment before sending over $5000.
5, Q: how about your EPTT of pace reduction motor ?
A: plywood circumstance ,if dimension is small ,we will pack with pallet for less one particular container
six, Q: What information must be presented, if I purchase electric powered helical EPTed motor from you ?
A: rated EPTT, ratio or output pace,sort ,voltage , mounting way , quantity , if a lot more is EPT.
in Maracay Venezuela (Bolivarian Republic of) sales price shop near me near me shop factory supplier Propeller Shaft for Ship, Reducer for Screw of Rolling Mill, Tower Crane, Coal Mill, Extruder, Forming Machine, Thrust Self-Aligning Roller Bearing 292 750 manufacturer best Cost Custom Cheap wholesaler
We are aiming to meet the needs of the customers close to the world.. The higher precise CNC tools, this sort of as Gradual-feeding wire-cut machine, jig grinding equipment and electrical discharge device, assures the leading quality precision of mould processing, with the high effective and environmental defense acid rolling line being the largest raw substance converting gear in the subject in china The wildly use of computerized milling equipment, large-speed automated feeding punch, higher velocity automatic rolling and assembling machine guarantees the substantial quality and efficiency of parts and chain making. If you are fascinated in any of our products or would like to talk about a possible buy, you should really feel free to contact us.
Description:
| Solution Name | Thrust Self-Aligning Roller EPTT |
| EPT | EPTT Metal |
| EPTT | EPT Metal EPTT |
| StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd | ISO/TS16949:2009 ISO10012 ISO14001 |
| Model | RJ WZWN OEM |
| Software Region | EPT/EPTlurgy/EPTT/EPTT Business/EPT EPTTry |
Advantage:
- EPT on bearings product for 30 many years
- Self-Factory, Self-EPT
- OEM is obtainable
- Export to 29countries incXiHu (West EPT) Dis.Hu (West EPT) Dis. SouthEPT Asia/ Usa/ EU/ EPT Afri
- The company has achieved the benchmark degree in the higher-precision British EPTTr roller bearing business, and provides customers with one particular-end service and EPT item options and technological remedies in the fields of development EPTTry, mining, cement, papermaking, petroleum, EPTT station equipment and robots. At present, EPT has obtained the national EPTlurgical EPT EPTT bearings specified creation EPTTrprises, EPTT EPT EPTs and EPT Group company petroleum EPTTry initial-class supply community membersThe company carries out the good quality management method of GB/ P19001-2000IDT IS PISO9001:200 and the measurement administration system stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd of GB/ T19571-2003IDT ISO 19002:2003, the two of which have attained the good quality administration system certification and the skilled certificate in the dose detection method certification.
Photo:Factory Particulars:
Product Method:
EPT generator, vertical motor, Maritime propeller shaft, rolling mill screw EPTT, tower crane, coal EPTT, extruder, molding EPTT, petroleum drilling EPTT, iron and steel EPTTry, crane hook, drilling EPTT rotary ring, rolling mill roll diameter
Related EPT:
FAQ:
SAMPLES
1.Samples quantity: 1-ten pcs are available.
2.Cost-free samples: It relies upon on the model NO., materials and quantity. Some of the bearings samples need to have consumer to pay samples charge and transport EPT.
three.It really is EPT to begin your orEPTTwith EPT Assurance to get total safety for your samples buy.
Tailored
The EPT Symbol or drawing is suitable for us.
MOQ
one.MOQ: ten pcs mix different stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd bearings.
2.MOQ: 5000 pcs EPT your model bearings.
OEM Policy
1.We can printing your model (logo,artwork)on the defend or laser engraving your model on the defend.
two.We can personalized your EPTT in accordance to your layout
three.All copyrigEPTT personal by clientele and we promised never disclose any information.
SUPORT
Make sure you go to our Clunt bearings website, we strongly encourge that you can connect with us via email,many thanks!
We have all sorts of bearings, just tell me your product amount and amount,very best price tag will be provided to you quickly
The substance of the bearings, precision score, seals kind,OEM services,and so on, all of them we can make in accordance to your requirementnt.
| NO. | d | D | T | d1 | D1 | B | C | A | kg |
| 29412 | sixty | one hundred thirty | forty two | eighty five | one hundred fifteen | 34.2 | 20.5 | 38 | two.48 |
| 29413 | sixty five | a hundred and forty | 45 | 91.five | one hundred twenty five | 36 | 21.9 | forty two | three.one |
| 29414 | 70 | a hundred and fifty | forty eight | ninety nine.five | one hundred thirty five | 39 | 23.four | forty four | 3.87 |
| 29415 | seventy five | one hundred sixty | fifty one | 106 | a hundred and forty | forty.eight | twenty five | 47 | 4.fifty nine |
| 29416 | 80 | 170 | 54 | 112.five | one hundred fifty | forty three.6 | 26 | 50 | five.43 |
| 29317 | eighty five | one hundred fifty | 39 | 110 | one hundred thirty five | 31 | 19.four | 50 | 2.sixty four |
| 29417 | eighty five | a hundred and eighty | fifty eight | 119.5 | one hundred sixty | forty six.8 | 27.5 | 54 | six.fifty seven |
| 29318 | 90 | 155 | 39 | 115.five | 140 | 31 | 19.8 | fifty two | 2.73 |
| 29418 | 90 | one hundred ninety | 60 | 125.five | a hundred and seventy | 48.seven | 29.three | 56 | seven.sixty six |
| 29320 | 100 | 170 | forty two | 127.5 | one hundred fifty five | 32.four | 21.two | 58 | 3.fifty two |
| 29420 | one hundred | 210 | sixty seven | 141 | 185 | fifty three.five | 32.two | sixty two | ten.two |
| 29322 | one hundred ten | 190 | 48 | 141.5 | a hundred seventy five | 37.8 | 23.nine | sixty four | five.37 |
| 29322EM | one hundred ten | a hundred ninety | 48 | 141.5 | a hundred seventy five | 32 | 23.nine | 64 | 5.24 |
| ZKL 29322EM | 110 | 190 | 48 | 143 | 176 | 30.6 | 23 | 63.one | five.26 |
| 29422 | 110 | 230 | 73 | 154 | 205 | 57.5 | 35.1 | sixty nine | 13.five |
| CGCT-29422 | one hundred ten | 230 | 73 | 154 | 208 | 50 | 35.one | 69 | 13.8 |
| 29422EM | a hundred and ten | 230 | 73 | 154 | 208 | fifty | 35.1 | 69 | thirteen.6 |
| ZKL 29422EM | one hundred ten | 230 | 73 | a hundred and sixty | 212 | 46.55 | 35 | sixty nine | thirteen.six |
| 29324 | one hundred twenty | 210 | 54 | 155 | one hundred ninety | forty one | 27.2 | 70 | seven.32 |
| 29324EMB | a hundred and twenty | 210 | fifty four | 155 | a hundred ninety | forty one | 27.two | 70 | 7.32 |
| 29424 | a hundred and twenty | 250 | seventy eight | 168 | 220 | sixty one.five | 38.8 | seventy four | 16.8 |
| 29424ECC | one hundred twenty | 250 | 78 | a hundred and seventy.twenty five | 223.95 | 61.5 | 38.8 | 74 | 16.ninety two |
| ZKL 29326EM | 130 | 225 | fifty eight | 170 | 205 | 19 | 28 | seventy six | 9.04 |
| 29326 | a hundred thirty | 225 | fifty eight | 167 | 205 | forty four.five | 28.3 | seventy six | 9.06 |
| CGCT-29326 | one hundred thirty | 225 | fifty eight | 167 | 205 | 38.341 | 28.3 | seventy six | nine.06 |
| 29426 | a hundred thirty | 270 | 85 | 181 | 240 | 66.five | forty one.one | eighty one | 22.three |
| 29328 | 140 | 240 | sixty | 179.five | 222 | 48 | 29.8 | 82 | 10.five |
| 29328-1 | a hundred and forty | 240 | 60 | 179.5 | 222 | forty five | 29.8 | 82 | ten.five |
| 29428 | 140 | 280 | 85 | 192.5 | 250 | sixty six | 41.4 | 86 | 23 |
| 29230M | 150 | 215 | 39 | 177.5 | 203.five | 29.eight | 18.two | 82 | four.3 |
| 29330 | one hundred fifty | 250 | 60 | 188 | 230 | 46 | 30 | 87 | 10.eight |
| CGCT-29330 | one hundred fifty | 250 | sixty | 188 | 231 | 22 | 30 | 87 | 11 |
| 29430 | a hundred and fifty | three hundred | ninety | 205 | 270 | 70 | 44.five | 92 | 28.six |
| 29430ECC | 150 | three hundred | 90 | 207.5 | 270.nine | 67.eight | forty four.5 | 92 | 28.5 |
| 29332 | one hundred sixty | 270 | sixty seven | 205 | 250 | fifty one | 31.seven | 92 | thirteen.9 |
| 29432 | 160 | 320 | 95 | 224 | 285 | seventy six.6 | 46.four | 99 | 33.eight |
| 29234 | one hundred seventy | 240 | forty two | 198 | 227 | 32 | twenty | ninety three | 5.sixty two |
| 29334 | one hundred seventy | 280 | sixty seven | 214.five | 255 | fifty one | 32.nine | 96 | eleven.1 |
| 29434 | 170 | 340 | 103 | 233 | 305 | 79.5 | 50.8 | 104 | forty two |
| 29236 | 180 | 250 | 42 | 208 | 236 | 32 | 22 | ninety six | 7.33 |
| 29336 | a hundred and eighty | 300 | seventy three | 227.5 | 277.5 | fifty nine | 35 | 103 | 22.one |
| 29436 | one hundred eighty | 360 | 109 | 246 | 320 | 85 | 53 | 110 | 48.seven |
| 29436E-CS | 180 | 360 | 109 | 250 | 331 | sixty nine.five | fifty three | 110 | forty eight.8 |
| CGCT-29436 | a hundred and eighty | 360 | 109 | 246 | 315 | 39 | fifty three | a hundred and ten | 48.4 |
| 29238 | a hundred ninety | 270 | forty eight | 220 | 255 | 36 | 25.4 | 102 | 8.34 |
| 29338 | one hundred ninety | 320 | seventy eight | 240 | 295 | sixty | 39.2 | a hundred and ten | 22.nine |
| 29438 | one hundred ninety | 380 | 115 | 260.5 | 340 | 88 | 56.3 | 117 | fifty eight.five |
| 29240 | two hundred | 280 | 48 | 229 | 265 | 36 | twenty five.four | 108 | 8.forty six |
| 29240EM | 200 | 280 | 48 | 235.5 | 271 | fifteen | 23.5 | 108 | eight.92 |
| 29340 | 200 | 340 | 85 | 253.5 | 310 | 64.8 | forty two.7 | 116 | 29.six |
| 29440 | 200 | 400 | 122 | 275 | 360 | ninety three.five | fifty nine | 122 | sixty eight.six |
| CGCT-29440A | 200 | 400 | 122 | 265 | 370 | 45 | fifty six | 139 | 76.four |
| CGCT-29440 | 200 | four hundred | 122 | 275 | 360 | forty four | 59 | 122 | sixty eight.six |
| 29244 | 220 | three hundred | forty eight | 254 | 286 | 38 | 23.five | 117 | eleven.three |
| 29344 | 220 | 360 | 85 | 275 | 330 | sixty three | 42.6 | one hundred twenty five | 31.1 |
| 29444 | 220 | 420 | 122 | 298.five | 383 | ninety eight | fifty seven | 132 | 74.46 |
| 29248 | 240 | 340 | sixty | 278 | 320 | forty five | 31.seven | one hundred thirty | 15.nine |
| 29348 | 240 | 380 | eighty five | 297 | 350 | sixty four | 42.one | 135 | 33.six |
| 29448 | 240 | 440 | 122 | 316 | four hundred | ninety three.five | 60.1 | 142 | 77.3 |
| CGCT-29448 | 240 | 440 | 122 | 316 | 405 | forty four | 60.one | 142 | seventy seven.4 |
| 29252 | 260 | 360 | sixty | 300.five | 340 | 45.five | 30.4 | 139 | 17 |
| 29352 | 260 | 420 | 95 | 323 | 385 | 72.five | 48.two | 148 | forty five.nine |
| 29452 | 260 | 480 | 132 | 342.5 | 435 | 102 | sixty four.8 | 154 | ninety four.five |
| CGCT-29452 | 260 | 480 | 132 | 342.five | 442 | forty eight | 64.eight | 154 | 102 |
| 29256M | 280 | 380 | 60 | 321 | 360 | 45 | 31 | a hundred and fifty | eighteen |
| 29356 | 280 | 440 | 95 | 343 | 405 | 72 | forty eight | 158 | fifty.four |
| 29456 | 280 | 520 | one hundred forty five | 370.five | 470 | 110 | seventy two.4 | 166 | 126 |
| 29260 | 300 | 420 | seventy three | 348 | 395 | 55 | 36.4 | 162 | 28.3 |
| 29360 | 300 | 480 | 109 | 370 | 440 | 81.five | fifty six | 168 | 69.five |
| 29460 | 300 | 540 | one hundred forty five | 395 | 490 | ninety seven.five | sixty nine.5 | one hundred seventy five | 125 |
| 29460EM | 300 | 540 | one hundred forty five | 392 | 485 | 110 | 72.4 | one hundred seventy five | 136 |
| 29264 | 320 | 440 | seventy three | 368.five | 415 | 55 | 37.four | 172 | 30.four |
| 29364 | 320 | 500 | 109 | 391.five | 465 | 81 | 55.two | 180 | seventy four.4 |
| 29464 | 320 | 580 | one hundred fifty five | 417.five | 525 | 118.5 | seventy six.seven | 191 | 171 |
| 29268M | 340 | 460 | 73 | 389 | 435 | 56 | 36.5 | 183 | 32.3 |
| 29368 | 340 | 540 | 122 | 419.5 | 500 | 92 | 60.six | 192 | a hundred and one |
| 29468 | 340 | 620 | 170 | 446 | 560 | 127.5 | 84.five | 201 | 209 |
| 29272M | 360 | five hundred | 85 | 418.five | 477 | sixty three | forty two.two | 194 | forty seven.6 |
| 29372 | 360 | 560 | 122 | 440 | 520 | 94 | fifty eight.8 | two hundred | 104 |
| 29472 | 360 | 640 | 170 | 467.5 | 580 | 129 | eighty four | 210 | 214 |
| 29276 | 380 | 520 | eighty five | 440 | 496 | 66 | 42 | 202 | 50.ninety seven |
| 29376M | 380 | 600 | 132 | 475 | 561 | ninety nine.5 | 61.4 | 216 | one hundred thirty |
| 29476 | 380 | 670 | one hundred seventy five | 496 | 610 | 129 | 87 | 230 | 248 |
| 29280 | 400 | 540 | eighty five | 455 | 510 | 64 | 42.eight | 212 | fifty one.three |
| 29380M | four hundred | 620 | 132 | 490 | 580 | 98 | sixty four.7 | 225 | 139 |
| 29480 | four hundred | 710 | 185 | 517.five | 645 | a hundred and forty | 94 | 236 | 295 |
| 29284 | 420 | 580 | ninety five | 485 | 552.one | sixty seven.three | 49.2 | 225 | 75.one |
| 29384 | 420 | 650 | a hundred and forty | 512.five | 600 | 103 | 70.seven | 235 | 157 |
| 29484 | 420 | 730 | 185 | 538 | 665 | 142 | sixty two.one | 244 | 307 |
| 29288 | 440 | 600 | 95 | 503.5 | 570 | seventy two | 49.six | 235 | seventy three.6 |
| 29388 | 440 | 680 | a hundred forty five | 539 | 630 | 109 | 70.eight | 245 | 168 |
| 29488 | 440 | 780 | 206 | 570 | 710 | 152 | one zero five | 260 | 395 |
| 29488EMB | 440 | 780 | 206 | 570 | 710 | 133.186 | a hundred and five | 260 | 394 |
| 29292 | 460 | 620 | 95 | 524.5 | 590 | seventy two | 49.four | 245 | 76.7 |
| 29392 | 460 | 710 | one hundred fifty | 558.five | 660 | 111 | seventy six.six | 257 | 198 |
| 29492 | 460 | 800 | 206 | 592.5 | 730 | 149 | 107 | 272 | 406 |
| 29296 | 480 | 650 | 103 | 549 | 620 | seventy six.5 | fifty two.1 | 259 | 92.one |
| 29396M | 480 | 730 | 150 | 582 | 684 | 112 | seventy four | 270 | 212 |
| 29496 | 480 | 850 | 224 | 638 | 810 | eighty one | 106.five | 280 | |
| 292/five hundred | five hundred | 670 | 103 | 569.five | 640 | 76 | 52 | 268 | ninety four.4 |
| 293/500M | 500 | 750 | 150 | 603 | 705 | 111 | seventy three.2 | 280 | 219 |
| 294/500 | 500 | 870 | 224 | 643 | 790 | 168 | 109.one | 290 | 513 |
| 292/530 | 530 | 710 | 109 | 603 | 675 | 81 | fifty five.2 | 288 | 113 |
| 293/530 | 530 | 800 | one hundred sixty | 639.five | 745 | 120 | 81 | 295 | 262 |
| 294/530E | 530 | 920 | 236 | 682 | 840 | one hundred seventy five | 118.5 | 309 | 614 |
| 292/560 | 560 | 750 | 115 | 638 | 715 | 84.5 | 58.four | 302 | 132 |
| 293/560 | 560 | 850 | one hundred seventy five | 690 | 822 | sixty | 87 | 310 | 320 |
| 294/560 | 560 | 980 | 250 | 740 | 940 | 92 | 122.5 | 328 | 750 |
| 294/560EMB | 560 | 980 | 250 | 729 | 890 | 90 | 120 | 328 | 750 |
| 292/600 | 600 | 800 | 122 | 688 | 780 | 39 | 59.four | 321 | 172 |
| 293/600 | 600 | 900 | one hundred eighty | 723 | 850 | 135 | ninety two | 335 | 380 |
| 294/600 | 600 | 1030 | 258 | 766 | 940 | two hundred | 128.7 | 347 | 850 |
| 292/630 | 630 | 850 | 132 | 728 | 830 | 42 | sixty seven.three | 338 | 218 |
| 293/630 | 630 | 950 | 190 | 754.5 | 885 | one hundred forty five | ninety six.five | 345 | 453 |
| 292/670 | 670 | 900 | one hundred forty | 773 | 880 | forty five | 68.six | 364 | 224 |
| 293/670 | 670 | a thousand | 200 | 813 | 968 | sixty eight | 98.2 | 372 | 501 |
| 292/710 | 710 | 950 | 145 | 807 | 905 | 10 | 106 | 74.8 | 265.eight |
| 293/710 | 710 | 1060 | 212 | 864 | 1571 | seventy two | one zero five.2 | 394 | 591 |
| 294/710M | 710 | 1220 | 308 | 907.5 | 1115 | 227 | 153.four | 415 | 1404 |
| 294/710K | 710 | 1220 | 308 | 907.five | 1115 | 202 | 153.4 | 415 | 1411 |
| 292/750 | 750 | 1000 | a hundred and fifty | 851 | 955 | 110 | 77.5 | 406 | 325 |
| 293/750M | 750 | 1120 | 224 | 903 | 1052 | 165 | 108 | 415 | 722 |
| 294/750 | 750 | 1280 | 315 | 950 | 1170 | 236 | 156.six | 436 | 1595 |
| 294/750K | 750 | 1280 | 315 | 950 | 1170 | 210 | 156.6 | 436 | 1600 |
| 292/800 | 800 | 1060 | 155 | 907.5 | 1571 | fifty | 80 | 426 | 343 |
| 293/800 | 800 | 1180 | 230 | 965 | 1146 | seventy eight | 116.one | 440 | 785 |
| 294/800 | 800 | 1360 | 335 | 1571 | 1250 | 256 | 162.five | 462 | 1880 |
| 292/850 | 850 | 1120 | 160 | 960 | 1065 | 117 | 82.9 | 453 | 486 |
| 294/850 | 850 | 1440 | 354 | 1090 | 1315 | 270 | 171 | 490 | 2219 |
| 292/900 | 900 | 1180 | one hundred seventy | 1571 | 1150 | 54 | eighty four.5 | 477 | 444 |
| 292/1060 | 1060 | 1400 | 206 | 1208 | 1335 | 151 | 100 | 566 | 767 |
| 292/1120 | 1120 | 1480 | 206 | 1272 | 1412 | 163 | ninety seven | 601 | 900 |
in Saltillo Mexico sales price shop near me near me shop factory supplier Delrin Worm Gear Drive Wheel Duplex Ground Plastic Good Price Ground Shaft Helical Micro for Gearbox Speed Reducer Outdoor Ride Car Spare Bestsupplyer Worm Gear manufacturer best Cost Custom Cheap wholesaler
assures the stability and regularity of the important perform of elements. we offer chromed bar and tubes for hydualic and pheumatic cylinders. The new items include a series of higher-tech and large high quality chains and sprockets and gears, this kind of as chains and gearboxes for agricultural machineries, metallurgical chains, escalator step-chains, high-pace tooth chains, timing chains, self-lubrication chains, among which have kind higher speed tooth chain for vehicle department dynamic box and aerial chains fill in the blanks of chain in China.
Delrin Worm EPT Travel Wheel Duplex Floor Plastic Excellent Cost Ground Shaft EPTcal EPT for EPTT Speed EPTT Outside Journey Car EPT EPTTEPTer Worm EPT
in Rayong Thailand sales price shop near me near me shop factory supplier Rx Rxf87 Parallel Shaft Helical Gear Reducer manufacturer best Cost Custom Cheap wholesaler
With several years’ expertise in this line, we will be reliable by our positive aspects in aggressive price tag, one-time shipping, prompt response, on-hand engineering help and very good after-revenue providers.Furthermore, all our creation techniques are in compliance with ISO9001 requirements. Our experts and engineers have 23 several years of Experience in the Bearing Industry. With thorough requirments, we can also develop your particular designed solution. Overview
———————————————————————————————————————————————————————————————————————————————–
Rapid Specifics
EPTing Arrangement: EPTcal Manufacturer Identify: EED
Enter Speed: 1400 rpm Output Pace: 4.8 rpm to 1075 rpm
Rated EPTT: .12 ~ 160KW EPT Ratio: 2.sixty four-251.twenty five
EPTT: EPTT/Silver or on ask for Origin: EPTT, EPTT (Mainland)
Warranty: 1 Calendar year Application: Business
———————————————————————————————————————————————————————————————————————————————–
EPT Potential
EPT Capacity: 20000 Piece/Items per Thirty day period
Extra Support: OEM is welcome
QC System: ISO9001:2008
———————————————————————————————————————————————————————————————————————————————–
EPTT amp Delivery
Package deal: EPTen box/Paper carton
Port: HangEPT/ZheJiang or on request
———————————————————————————————————————————————————————————————————————————————–
About XiHu (West EPT) Dis.ngda considering that 1984
HangEPT Melchizedek EPTTort amp Export EPTT, Ltd. is a leaEPTTmanufactur in system area and punching/stamp
ing discipline considering that 1984. Our principal item, NMRV worm EPT speed EPTT and collection helical EPTT, XDR,
XDF, XDK, XDShave achieved the EPTd strategy index of the congeneric European and Janpanese produc
ts, We supply stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd EPTs, sprockets, EPTs, pulleys, couplings, bushes and so on. We also can take orders
of non-stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd merchandise, these kinds of as EPTs, shafts, punching parts ect, according to customers’ Drawings or sam-
ples.
Our firm has complete set of equipment incXiHu (West EPT) Dis.Hu (West EPT) Dis. CNC, lathes, milling EPTTs, EPT hobbing EPTT, g-
ear grinding EPTT, EPT honing EPTT, EPT shaping EPTT, worm grinder, grinding EPTTs, drilling m-
achines, boringEPTTs, planer, drawing benches, punches, EPT presses, plate shearing EPTTs and s-
o on. We have EPTd testing equipments also.
Our company has estabEPTTd favorable cooperation interactions with sub-suppliers involving casting, uncooked mat-
erial, heat therapy, floor finishing and so on.
