Product Description
Production Description
the motors are of box-section construction, the frame is welded into box-section using steel plate, and hence the weight of
motors is light and rigidity i good. Two sides and top of the frame are all provided with the windows, which ,on the 1 hand is
convenient to maintain and take are of motors,and,on the other hand,can mount different coolers on the top of frame,thus being
capable of deriving the motors with different methods of cooling and different degrees of protection.
| Power | 180kw~6000kw |
| Insulation | F / B, H/B |
| Voltage and frequency | 3.3kv/6kv/6.6kv 10kv 11kv 13.8kv 50 / 60HZ |
| Speed | 3000/1500/1000/750/600 rpm |
| Mounitng | IMB3/IMV1 |
| Cooling and ventilation | IC611 |
| Winding | 100% Cooper Wire |
| Protection class | IP54 / IP55 |
| Vibration | vibration class A, vibration class B is available on request. |
| Quality assurance | obey ISO9001 documented quality system. |
| Site conditions | from -15°C t0 +40°C and altitude below 1000 meters |
This series of motor may be used for driving all kinds of genHangZhou machines such as the compressor, ventilation fan, water pump
stock-removing machine, transportation machines and other mechanical equipment, and are applied as the prime mover in all
industrial and mining enterprises such as the mine,machinery, petrochemical industry and power plant etc, if the users place
an order the motors that are used for driving the machines with huge rotary inertia such as the blower, coal grinder, rolling
machine, crusher, belt machine, etc, they shall provide us with relevant technical data, CHINAMFG the technical agreement with us
as the basis for specific design of motor to ensure the reliable operation of motor.
Products Application, Value Added Service
PinnxunMotor can provide a complete set of optimal solutions for various Applications,Bring innovation and
valueadded to our customers, At the same time, we can also formulate special solutions according to the
different needed of customer
Product Process
CHINAMFG always take good faith, responsibility, carefulness and CHINAMFG as our management philosophy,
committedto providing customers with superior quality products,every step in processs must be take full attention.
Qualification certification system
The key for ‘Pinxing’ long-terms cooperation is to continuously improve the quality of is products and service,By virtue of is
comprehensive process, quality management system and strict compliance with internationalmainstream standards.’Pinxing’
has established a quality management system that has passed ISO9001-2008 Quality management system certification
ISO14001 Environmental management system.
ISO9001-2008 Quality management system
ISO14001 Environmental management system
CE European Certification
IECEX CHINAMFG Ex Certification for Ex motors
ATEX European Ex Certification for Ex motors
EAC Russia GOST standard Ex certification for Ex motors
CQC China quality center energy conservation certification
Worldwide Marketing & Service Network
Global Perfect Marketing service network is 1 of Pinxing’s advantage. we have 38 branches in china main city,5 branches in
the Abroad ,Our business penetrates more than 60 countries and regions including South America, North America,Europe, Asia
MiddleEast and Africa, Giving us rapid reach capacity from sales, service, procurement and Transportation since inception,Pinxing
always uphold the development strategy of market globalization. we segment and position customers needs and target market.our
products and service are widely used in global industry, and performance stable and safety.we custom different motors for different
industries
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial,Universal,Power Tool |
|---|---|
| Speed: | Constant Speed |
| Number of Stator: | Three-Phase |
| Function: | Driving |
| Casing Protection: | Protection Type |
| Number of Poles: | 2/4/6/8/10/12 Pole |
| Customization: |
Available
|
|
|---|
Can gear motors be used in robotics, and if so, what are some notable applications?
Yes, gear motors are widely used in robotics due to their ability to provide torque, precise control, and compact size. They play a crucial role in various robotic applications, enabling the movement, manipulation, and control of robotic systems. Here are some notable applications of gear motors in robotics:
1. Robotic Arm Manipulation:
Gear motors are commonly used in robotic arms to provide precise and controlled movement. They enable the articulation of the arm’s joints, allowing the robot to reach different positions and orientations. Gear motors with high torque capabilities are essential for lifting, rotating, and manipulating objects with varying weights and sizes.
2. Mobile Robots:
Gear motors are employed in mobile robots, including wheeled robots and legged robots, to drive their locomotion. They provide the necessary torque and control for the robot to move, turn, and navigate in different environments. Gear motors with appropriate gear ratios ensure the robot’s mobility, stability, and maneuverability.
3. Robotic Grippers and End Effectors:
Gear motors are used in robotic grippers and end effectors to control the opening, closing, and gripping force. By integrating gear motors into the gripper mechanism, robots can grasp and manipulate objects of various shapes, sizes, and weights. The gear motors enable precise control over the gripping action, allowing the robot to handle delicate or fragile objects with care.
4. Autonomous Drones and UAVs:
Gear motors are utilized in the propulsion systems of autonomous drones and unmanned aerial vehicles (UAVs). They drive the propellers or rotors, providing the necessary thrust and control for the drone’s flight. Gear motors with high power-to-weight ratios, efficient energy conversion, and precise speed control are crucial for achieving stable and maneuverable flight in drones.
5. Humanoid Robots:
Gear motors are integral to the movement and functionality of humanoid robots. They are used in robotic joints, such as hips, knees, and shoulders, to enable human-like movements. Gear motors with appropriate torque and speed capabilities allow humanoid robots to walk, run, climb stairs, and perform complex motions resembling human actions.
6. Robotic Exoskeletons:
Gear motors play a vital role in robotic exoskeletons, which are wearable robotic devices designed to augment human strength and assist in physical tasks. Gear motors are used in the exoskeleton’s joints and actuators, providing the necessary torque and control to enhance human abilities. They enable users to perform tasks with reduced effort, assist in rehabilitation, or provide support in physically demanding environments.
These are just a few notable applications of gear motors in robotics. Their versatility, torque capabilities, precise control, and compact size make them indispensable components in various robotic systems. Gear motors enable robots to perform complex tasks, move with agility, interact with the environment, and assist humans in a wide range of applications, from industrial automation to healthcare and exploration.
What are some common challenges or issues associated with gear motors, and how can they be addressed?
Gear motors, like any mechanical system, can face certain challenges or issues that may affect their performance, reliability, or longevity. However, many of these challenges can be addressed through proper design, maintenance, and operational practices. Here are some common challenges associated with gear motors and potential solutions:
1. Gear Wear and Failure:
Over time, gears in a gear motor can experience wear, resulting in decreased performance or even failure. The following measures can address this challenge:
- Proper Lubrication: Regular lubrication with the appropriate lubricant can minimize friction and wear between gear teeth. It is essential to follow manufacturer recommendations for lubrication intervals and use high-quality lubricants suitable for the specific gear motor.
- Maintenance and Inspection: Routine maintenance and periodic inspections can help identify early signs of gear wear or damage. Timely replacement of worn gears or components can prevent further damage and ensure the gear motor’s optimal performance.
- Material Selection: Choosing gears made from durable and wear-resistant materials, such as hardened steel or specialized alloys, can increase their lifespan and resistance to wear.
2. Backlash and Inaccuracy:
Backlash, as discussed earlier, can introduce inaccuracies in gear motor systems. The following approaches can help address this issue:
- Anti-Backlash Gears: Using anti-backlash gears, which are designed to minimize or eliminate backlash, can significantly reduce inaccuracies caused by gear play.
- Tight Manufacturing Tolerances: Ensuring precise manufacturing tolerances during gear production helps minimize backlash and improve overall accuracy.
- Backlash Compensation: Implementing control algorithms or mechanisms to compensate for backlash can help mitigate its effects and improve the accuracy of the gear motor.
3. Noise and Vibrations:
Gear motors can generate noise and vibrations during operation, which may be undesirable in certain applications. The following strategies can help mitigate this challenge:
- Noise Dampening: Incorporating noise-dampening features, such as vibration-absorbing materials or isolation mounts, can reduce noise and vibrations transmitted from the gear motor to the surrounding environment.
- Quality Gears and Bearings: Using high-quality gears and bearings can minimize vibrations and noise generation. Precision-machined gears and well-maintained bearings help ensure smooth operation and reduce unwanted noise.
- Proper Alignment: Ensuring accurate alignment of gears, shafts, and other components reduces the likelihood of noise and vibrations caused by misalignment. Regular inspections and adjustments can help maintain optimal alignment.
4. Overheating and Thermal Management:
Heat buildup can be a challenge in gear motors, especially during prolonged or heavy-duty operation. Effective thermal management techniques can address this issue:
- Adequate Ventilation: Providing proper ventilation and airflow around the gear motor helps dissipate heat. This can involve designing cooling fins, incorporating fans or blowers, or ensuring sufficient clearance for air circulation.
- Heat Dissipation Materials: Using heat-dissipating materials, such as aluminum or copper, in motor housings or heat sinks can improve heat dissipation and prevent overheating.
- Monitoring and Control: Implementing temperature sensors and thermal protection mechanisms allows for real-time monitoring of the gear motor’s temperature. If the temperature exceeds safe limits, the motor can be automatically shut down or adjusted to prevent damage.
5. Load Variations and Shock Loads:
Unexpected load variations or shock loads can impact the performance and durability of gear motors. The following measures can help address this challenge:
- Proper Sizing and Selection: Choosing gear motors with appropriate torque and load capacity ratings for the intended application helps ensure they can handle expected load variations and occasional shock loads without exceeding their limits.
- Shock Absorption: Incorporating shock-absorbing mechanisms, such as dampers or resilient couplings, can help mitigate the effects of sudden load changes or impacts on the gear motor.
- Load Monitoring: Implementing load monitoring systems or sensors allows for real-time monitoring of load variations. This information can be used to adjust operation or trigger protective measures when necessary.
By addressing these common challenges associated with gear motors through appropriate design considerations, regular maintenance, and operational practices, it is possible to enhance their performance, reliability, and longevity.
What is a gear motor, and how does it combine the functions of gears and a motor?
A gear motor is a type of motor that incorporates gears into its design to combine the functions of gears and a motor. It consists of a motor, which provides the mechanical power, and a set of gears, which transmit and modify this power to achieve specific output characteristics. Here’s a detailed explanation of what a gear motor is and how it combines the functions of gears and a motor:
A gear motor typically consists of two main components: the motor and the gear system. The motor is responsible for converting electrical energy into mechanical energy, generating rotational motion. The gear system, on the other hand, consists of multiple gears with different sizes and tooth configurations. These gears are meshed together in a specific arrangement to transmit and modify the output torque and speed of the motor.
The gears in a gear motor serve several functions:
1. Torque Amplification:
One of the primary functions of the gear system in a gear motor is to amplify the torque output of the motor. By using gears with different sizes, the input torque can be effectively multiplied or reduced. This allows the gear motor to provide higher torque at lower speeds or lower torque at higher speeds, depending on the gear arrangement. This torque amplification is beneficial in applications where high torque is required, such as in heavy machinery or vehicles.
2. Speed Reduction or Increase:
The gear system in a gear motor can also be used to reduce or increase the rotational speed of the motor output. By utilizing gears with different numbers of teeth, the gear ratio can be adjusted to achieve the desired speed output. For example, a gear motor with a higher gear ratio will output lower speed but higher torque, whereas a gear motor with a lower gear ratio will output higher speed but lower torque. This speed control capability allows for precise matching of motor output to the requirements of specific applications.
3. Directional Control:
Gears in a gear motor can be used to control the direction of rotation of the motor output shaft. By employing different combinations of gears, such as spur gears, bevel gears, or worm gears, the rotational direction can be changed. This directional control is crucial in applications where bidirectional movement is required, such as in conveyor systems or robotic arms.
4. Load Distribution:
The gear system in a gear motor helps distribute the load evenly across multiple gears, which reduces the stress on individual gears and increases the overall durability and lifespan of the motor. By sharing the load among multiple gears, the gear motor can handle higher torque applications without putting excessive strain on any particular gear. This load distribution capability is especially important in heavy-duty applications that require continuous operation under demanding conditions.
By combining the functions of gears and a motor, gear motors offer several advantages. They provide torque amplification, speed control, directional control, and load distribution capabilities, making them suitable for various applications that require precise and controlled mechanical power. Gear motors are commonly used in industries such as robotics, automotive, manufacturing, and automation, where reliable and efficient power transmission is essential.
editor by CX 2024-04-22
China Good quality Three Phase Asynchronous AC Induction Electric Gear Reducer Industry Machine Motor vacuum pump booster
Product Description
Product Description
Three Phase Asynchronous AC Induction Electric Gear Reducer Industry Machine Motor
YE2,MS series three-phase asynchronous induction motor isa kind ofTEFC squirrel cage motor with the national unifieddesign,it has the characteristics of high efficiency,energysaving, high starting torque, low noise, low vibrationand easy maintenance, the geade of power and the mountingmesasurement are subject to the lEC standard, This seriesmotor is commonly used in the machinery without specialreq-uirement specially for reducer,air compressor, waterpump.oil pump, packaging and food machinery and so on.
|
Centre height |
80~355mm |
|
Power range |
0.75~355kw |
|
Rated voltage |
380v(or order) |
|
Rated Frequency |
50Hz(60Hz) |
|
Insulation class |
F(temperature rise 80K) |
|
Protection class |
IP55 |
|
Duty type |
S1 |
|
Mounting type |
B3 B35 B5 |
|
If you want more information, please consult me |
|
Product Parameters
Our Advantages
Packaging & Shipping
Company Profile
Certifications
FAQ
Q: Do you offer OEM service?
A: Yes, we can customize it as your request.
Q: What is your payment term?
A: TT. LC, AND WESTER UNION
Q: What is your lead time?
A: About 30 days after receiving deposit.
Q: What certificates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, SASO for Saudi Arabia, etc
Q: What about the warranty?
A: We offer 12month warranty period as the quality guarantee.
Q:What service do you offer?
A: Pre-sales service, in-sales service, after-sales service. If you become our local distributor, we can introduce end-customers to purchase from you.
Q:What’s your motor winding?
A: 100% copper winding
Q:Which port is near to you?
A: HangZhou port. And we can arrange to deliver HangZhou, ZheJiang , Urumqi, or other Chinese cities, too.
Q:Could you offer CHINAMFG Certification.
A: we can do as your request.
| Application: | Industrial |
|---|---|
| Speed: | Constant Speed |
| Number of Stator: | Three-Phase |
| Function: | Driving |
| Casing Protection: | Protection Type |
| Number of Poles: | 2 |
| Samples: |
US$ 200/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Are gear motors suitable for both heavy-duty industrial applications and smaller-scale uses?
Yes, gear motors are suitable for both heavy-duty industrial applications and smaller-scale uses. Their versatility and ability to provide torque multiplication make them valuable in a wide range of applications. Here’s a detailed explanation of why gear motors are suitable for both types of applications:
1. Heavy-Duty Industrial Applications:
Gear motors are commonly used in heavy-duty industrial applications due to their robustness and ability to handle high loads. Here are the reasons why they are suitable for such applications:
- Torque Multiplication: Gear motors are designed to provide high torque output, making them ideal for applications that require substantial force to move or operate heavy machinery, conveyors, or equipment.
- Load Handling: Industrial settings often involve heavy loads and demanding operating conditions. Gear motors, with their ability to handle high loads, are well-suited for tasks such as lifting, pulling, pushing, or driving heavy materials or equipment.
- Durability: Heavy-duty industrial applications require components that can withstand harsh environments, frequent use, and demanding operating conditions. Gear motors are typically constructed with durable materials and designed to withstand heavy vibrations, shock loads, and temperature variations.
- Speed Reduction: Many industrial processes require the reduction of motor speed to achieve the desired output speed. Gear motors offer precise speed reduction capabilities through gear ratios, allowing for optimal control and operation of machinery and equipment.
2. Smaller-Scale Uses:
While gear motors excel in heavy-duty industrial applications, they are also suitable for smaller-scale uses across various industries and applications. Here’s why gear motors are well-suited for smaller-scale uses:
- Compact Size: Gear motors are available in compact sizes, making them suitable for applications with limited space or small-scale machinery, devices, or appliances.
- Torque and Power Control: Even in smaller-scale applications, there may be a need for torque multiplication or precise power control. Gear motors can provide the necessary torque and power output for tasks such as precise positioning, controlling speed, or driving small loads.
- Versatility: Gear motors come in various configurations, such as parallel shaft, planetary, or worm gear designs, offering flexibility to match specific requirements. They can be adapted to different applications, including robotics, medical devices, automotive systems, home automation, and more.
- Efficiency: Gear motors are designed to be efficient, converting the electrical input power into mechanical output power with minimal losses. This efficiency is advantageous for smaller-scale applications where energy conservation and battery life are critical.
Overall, gear motors are highly versatile and suitable for both heavy-duty industrial applications and smaller-scale uses. Their ability to provide torque multiplication, handle high loads, offer precise speed control, and accommodate various sizes and configurations makes them a reliable choice in a wide range of applications. Whether it’s powering large industrial machinery or driving small-scale automation systems, gear motors provide the necessary torque, control, and durability required for efficient operation.
What are some common challenges or issues associated with gear motors, and how can they be addressed?
Gear motors, like any mechanical system, can face certain challenges or issues that may affect their performance, reliability, or longevity. However, many of these challenges can be addressed through proper design, maintenance, and operational practices. Here are some common challenges associated with gear motors and potential solutions:
1. Gear Wear and Failure:
Over time, gears in a gear motor can experience wear, resulting in decreased performance or even failure. The following measures can address this challenge:
- Proper Lubrication: Regular lubrication with the appropriate lubricant can minimize friction and wear between gear teeth. It is essential to follow manufacturer recommendations for lubrication intervals and use high-quality lubricants suitable for the specific gear motor.
- Maintenance and Inspection: Routine maintenance and periodic inspections can help identify early signs of gear wear or damage. Timely replacement of worn gears or components can prevent further damage and ensure the gear motor’s optimal performance.
- Material Selection: Choosing gears made from durable and wear-resistant materials, such as hardened steel or specialized alloys, can increase their lifespan and resistance to wear.
2. Backlash and Inaccuracy:
Backlash, as discussed earlier, can introduce inaccuracies in gear motor systems. The following approaches can help address this issue:
- Anti-Backlash Gears: Using anti-backlash gears, which are designed to minimize or eliminate backlash, can significantly reduce inaccuracies caused by gear play.
- Tight Manufacturing Tolerances: Ensuring precise manufacturing tolerances during gear production helps minimize backlash and improve overall accuracy.
- Backlash Compensation: Implementing control algorithms or mechanisms to compensate for backlash can help mitigate its effects and improve the accuracy of the gear motor.
3. Noise and Vibrations:
Gear motors can generate noise and vibrations during operation, which may be undesirable in certain applications. The following strategies can help mitigate this challenge:
- Noise Dampening: Incorporating noise-dampening features, such as vibration-absorbing materials or isolation mounts, can reduce noise and vibrations transmitted from the gear motor to the surrounding environment.
- Quality Gears and Bearings: Using high-quality gears and bearings can minimize vibrations and noise generation. Precision-machined gears and well-maintained bearings help ensure smooth operation and reduce unwanted noise.
- Proper Alignment: Ensuring accurate alignment of gears, shafts, and other components reduces the likelihood of noise and vibrations caused by misalignment. Regular inspections and adjustments can help maintain optimal alignment.
4. Overheating and Thermal Management:
Heat buildup can be a challenge in gear motors, especially during prolonged or heavy-duty operation. Effective thermal management techniques can address this issue:
- Adequate Ventilation: Providing proper ventilation and airflow around the gear motor helps dissipate heat. This can involve designing cooling fins, incorporating fans or blowers, or ensuring sufficient clearance for air circulation.
- Heat Dissipation Materials: Using heat-dissipating materials, such as aluminum or copper, in motor housings or heat sinks can improve heat dissipation and prevent overheating.
- Monitoring and Control: Implementing temperature sensors and thermal protection mechanisms allows for real-time monitoring of the gear motor’s temperature. If the temperature exceeds safe limits, the motor can be automatically shut down or adjusted to prevent damage.
5. Load Variations and Shock Loads:
Unexpected load variations or shock loads can impact the performance and durability of gear motors. The following measures can help address this challenge:
- Proper Sizing and Selection: Choosing gear motors with appropriate torque and load capacity ratings for the intended application helps ensure they can handle expected load variations and occasional shock loads without exceeding their limits.
- Shock Absorption: Incorporating shock-absorbing mechanisms, such as dampers or resilient couplings, can help mitigate the effects of sudden load changes or impacts on the gear motor.
- Load Monitoring: Implementing load monitoring systems or sensors allows for real-time monitoring of load variations. This information can be used to adjust operation or trigger protective measures when necessary.
By addressing these common challenges associated with gear motors through appropriate design considerations, regular maintenance, and operational practices, it is possible to enhance their performance, reliability, and longevity.
Can you explain the advantages of using gear motors in various mechanical systems?
Gear motors offer several advantages when utilized in various mechanical systems. Their unique characteristics make them well-suited for applications that require controlled power transmission, precise speed control, and torque amplification. Here’s a detailed explanation of the advantages of using gear motors:
1. Torque Amplification:
One of the key advantages of gear motors is their ability to amplify torque. By using different gear ratios, gear motors can increase or decrease the output torque from the motor. This torque amplification is crucial in applications that require high torque output, such as lifting heavy loads or operating machinery with high resistance. Gear motors allow for efficient power transmission, enabling the system to handle demanding tasks effectively.
2. Speed Control:
Gear motors provide precise speed control, allowing for accurate and controlled movement in mechanical systems. By selecting the appropriate gear ratio, the rotational speed of the output shaft can be adjusted to match the requirements of the application. This speed control capability ensures that the mechanical system operates at the desired speed, whether it needs to be fast or slow. Gear motors are commonly used in applications such as conveyors, robotics, and automated machinery, where precise speed control is essential.
3. Directional Control:
Another advantage of gear motors is their ability to control the rotational direction of the output shaft. By using different types of gears, such as spur gears, bevel gears, or worm gears, the direction of rotation can be easily changed. This directional control is beneficial in applications that require bidirectional movement, such as in actuators, robotic arms, and conveyors. Gear motors offer reliable and efficient directional control, contributing to the versatility and functionality of mechanical systems.
4. Efficiency and Power Transmission:
Gear motors are known for their high efficiency in power transmission. The gear system helps distribute the load across multiple gears, reducing the strain on individual components and minimizing power losses. This efficient power transmission ensures that the mechanical system operates with optimal energy utilization and minimizes wasted power. Gear motors are designed to provide reliable and consistent power transmission, resulting in improved overall system efficiency.
5. Compact and Space-Saving Design:
Gear motors are compact in size and offer a space-saving solution for mechanical systems. By integrating the motor and gear system into a single unit, gear motors eliminate the need for additional components and reduce the overall footprint of the system. This compact design is especially beneficial in applications with limited space constraints, allowing for more efficient use of available space while still delivering the necessary power and functionality.
6. Durability and Reliability:
Gear motors are designed to be robust and durable, capable of withstanding demanding operating conditions. The gear system helps distribute the load, reducing the stress on individual gears and increasing overall durability. Additionally, gear motors are often constructed with high-quality materials and undergo rigorous testing to ensure reliability and longevity. This makes gear motors well-suited for continuous operation in industrial and commercial applications, where reliability is crucial.
By leveraging the advantages of torque amplification, speed control, directional control, efficiency, compact design, durability, and reliability, gear motors provide a reliable and efficient solution for various mechanical systems. They are widely used in industries such as robotics, automation, manufacturing, automotive, and many others, where precise and controlled mechanical power transmission is essential.
editor by CX 2023-11-27
China manufacturer 25W 90W 120W 180W 200W 250W 110V 220V single 3 phase micro ac reducer right angle electric gear box motor with speed controller with Great quality
Warranty: 12 MONTHS
Model Number: 15W/25W/40W/60W/90W/120W/180W/200W
Type: Induction Motor
Frequency: 50HZ/60HZ
Phase: Single-phase
Protect Feature: Drip-proof
AC Voltage: 110V220V380V415V
Efficiency: IE3
Product Name: AC GEAR MOTOR
Rated Power: 6W-250W
Gear ratio: 3-200
Output speed: 7-433rpm
Insulation class: B(130 degree)
Motor diameter: 60/70/80/90/104 mm
Gearbox size: 60/70/80/90/104 mm
Certification: CCC, CE, VDE
Packaging Details: Wooden box or carton packing
More Products
Product Features
Workshop show
Exhibition
Model and Size
Certifications
FAQ
1,Are you gear motors manufacturer ?We are manufacturer,There are many years of production.2,How long is lead time ?The delivery cycle usually takes 3-5 working days. If the order is more than 50, we need to confirm the time with customer service.3,Do you support customized manufacturing?Yes, we can make it to order. We support OEM your logo, packaging and color .4,What’s your Warranty terms?We offer 12 months warranty time.5,How to delivery?By sea- Buyer appoints forwarder,or our sales team finds suitable forwarder for buyers.By air- Buyer offers collect express account,or our sales team fingds suitable express for buyers.(Mostly for sample) Other- We arrange to delivery goods to some place in China appointed by buyers.6,Can you make OEM/ODM order?Yes,we have rich experience on OEM/ODM order and like sign Non-disclosure Agreement before sample making.
Contact Us
reversible 25w 40w 140w 140watt 180w 110volt 220volt 220v 380v single-phase low rpm ac motor ac small gear motor 60rpm 1350rpm
How to Maximize Gear Motor Reliability
A gearmotor is a mechanical device used to transmit torque from one location to another. As its name implies, it is designed to rotate one object relative to another. Its main use is to transmit torque from one point to another. The most common types of gear motors are: worm, spur, and helical. Each of these has specific functions and can be used for a variety of applications. Reliability is also an important factor to consider when choosing a gearmotor.
Applications of a gear motor
Despite its small size, a gear motor has many applications. These include heavy machinery lifts, hospital beds, and power recliners. It is also found in many everyday products, such as electromechanical clocks and cake mixers. Its versatility allows it to produce a high force from a small electric motor. Here are some of its most common uses. You can also find a gear motor in many household appliances and vehicles.
Before selecting a gearmotor, consider the specifications of the machine you need to power. You should consider its size, weight, and ambient conditions, which include temperature regimes, noise levels, and contaminating sources. You should also take into account the envelope size, mounting method, and orientation. Other considerations include the expected service life, maintenance scope, and control type. The most suitable gearmotor for your specific application will be one that can handle the load.
The motor and gearbox types can be mixed and matched, depending on the application. A three-phase asynchronous motor and a permanent magnet synchronous servomotor are common choices for these devices. The type of motor and gearbox combination you choose will determine the power supply, the efficiency of the motor, and cost. Once you understand the application, it will be easy to integrate a gear motor into your system.
When used in industrial applications, gear motors are effective for reducing the speed of rotating shafts. One third of all industrial electric motor systems use gearing to reduce output speed. They can also save energy, which benefits the workers who operate them. In fact, industrial electric motor systems are responsible for nearly one-tenth of the carbon dioxide emissions that are produced by fossil-fueled power plants. Fortunately, efficiency and reliability are just two of the benefits of using gear motors.
Types
Before choosing a gearmotor, it is important to understand its specifications. The key factors to consider are the size, weight, and noise level of the gearmotor. Additionally, the power, torque, and speed of the motor are important factors. Specifications are also important for its operating environment, such as the temperature and the level of ingress protection. Finally, it is important to determine its duty cycle to ensure it will operate properly. To choose a suitable gearmotor, consult the specifications of your application.
Some common applications of gearmotors include packaging equipment, conveyors, and material handling applications. They also come with several advantages, including their ability to control both position and speed. This makes them ideal for applications where speed and positioning are crucial. Parallel-shaft gear units, for instance, are commonly used in conveyors, material handling, and steel mills. They are also able to operate in high-precision manufacturing. For these reasons, they are the most popular type of gearmotor.
There are three common types of gears. Helical gears have teeth that are inclined at 90 degrees to the axis of rotation, making them more efficient. Helicoidal gears, meanwhile, have a lower noise level and are therefore preferred for applications requiring high torque. Worm gears are preferred for applications where torque and speed reduction are important, and worm gears are suited for those conditions. They also have advantages over spur gears and worm gears.
The application of a gear motor is almost limitless. From heavy machine lifts to hospital bed lifting mechanisms, gear motors make it possible to use a small rotor at a high speed. Their lightweight construction also allows them to move heavy loads, such as cranes, but they do so slowly. Gear motors are an excellent choice in applications where space is an issue. A few common applications are discussed below. When choosing a gear motor, remember to choose the best size and application for your needs.
Functions
A gearmotor’s speed is directly proportional to the gear ratio. By dividing the input speed by the gear ratio, the output speed can be determined. Gear ratios above one reduce speed, while gear ratios below one increase speed. Efficiency of a gearmotor is defined as its ability to transfer energy through its gearbox. This efficiency factor takes into account losses from friction and slippage. Most gearmotor manufacturers will provide this curve upon request.
There are several factors that must be considered when choosing a gearmotor. First, the application must meet the desired speed and torque. Second, the output shaft must rotate in the desired direction. Third, the load must be properly matched to the gearmotor. Lastly, the operating environment must be considered, including the ambient temperature and the level of protection. These details will help you find the perfect gearmotor. You can compare various types of gear motors on this page and choose the one that will meet your needs.
The micro-DC gear motor is one of the most versatile types of geared motors. These motors are widely used in intelligent automobiles, robotics, logistics, and the smart city. Other applications include precision instruments, personal care tools, and cameras. They are also commonly found in high-end automotives and are used in smart cities. They also find use in many fields including outdoor adventure equipment, photography equipment, and electronics. The benefits of micro-DC gear motors are many.
The main function of a gear motor is to reduce the speed of a rotating shaft. Small electric clocks, for example, use a synchronous motor with a 1,200-rpm output speed to drive the hour, minute, and second hands. While the motor is small, the force it exerts is enormous, so it’s crucial to ensure that the motor isn’t over-powered. There is a high ratio between the input torque and the output torque.
Reliability
The reliability of a gear motor is dependent on a number of factors, including material quality, machining accuracy, and operating conditions. Gear failure is often more serious than surface fatigue, and can compromise personal safety. Reliability is also affected by the conditions of installation, assembly, and usage. The following sections provide an overview of some important factors that impact gear motor reliability. This article provides some tips to maximize gear motor reliability.
First and foremost, make sure you’re buying from a reliable supplier. Gear motors are expensive, and there is no standardization of the sizes. If a gear breaks, replacing it can take a lot of time. In the long run, reliability wins over anything. But this doesn’t mean that you can ignore the importance of gears – the quality of a gear motor is more important than how long it lasts.
Cost
The cost of a gear motor is relatively low compared to that of other forms of electric motors. This type of motor is commonly used in money counters, printers, smart homes, and automation equipment. A DC gear motor is also commonly used in automatic window machines, glass curtain walls, and banknote vending machines. There are many advantages to using a gear motor. Here are a few of them. Read on to learn more about them.
Speed management is another benefit of a gear motor. The motors tend to have less wear and tear than other motors, which means less frequent replacements. Additionally, many gear motors are easy to install and require less maintenance, which also helps reduce the overall cost of ownership. Lastly, because noise is a common concern for many electronic OEMs, DC gear motors are often quieter than their counterparts. For these reasons, they are often used in industrial settings.
Another advantage of an electric gear motor is its size and power. They are typically designed for 12V, 24V, and 48V voltages and 200-watt power. Their rated speed is 3000 rpm and their torque is 0.64 Nm. They are also more reliable than their AC counterparts and are ideal for many industrial applications. They have a high ratio of three to two, which makes them ideal for a variety of applications.
A gear motor is an electric motor that is coupled with a gear train. It uses AC or DC power, and is often called a gear reducer. The main purpose of these gear reducers is to multiply torque, while maintaining compact size and overall efficiency. However, the efficiency of a gear motor is also affected by ambient temperature and lubricants. If the gear motor is installed in the wrong location, it may be ineffective and result in premature failure of the machine.
in Beira Mozambique sales price shop near me near me shop factory supplier Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump Universal Industry Machine Motor manufacturer best Cost Custom Cheap wholesaler
we are self-assured to offer our buyers flexible and diversified providers. EPG was awarded with “renowned solution of Zhejiang Province” and “popular brand name of Zhejiang Province”. Our company pays particular interest to customers’ requirements, listening to the specific demands of each consumer and guaranteeing complete pleasure.
Three Section Asynchronous AC Induction Electric Equipment EPT Fan EPTlower Vacuum Air Compressor Water Pump Common Market EPT Motor
———————————————————————————————
Apps: Can be applied in the EPTs exactly where constant responsibility is necessary, common purposes like
- Pumps
- Followers
- Compressors
- Lifting equipment
- Generation industry
EPT Description
- Body measurements: sixty three to 355M/L
- Rated output: .12 to 400kW
- Voltage: 380V
- Frequency: 50Hz or 60Hz
- Poles: 2, 4, 6, eight,10
- Effectiveness ranges: IE1,IE2,IE3,IE4
- Duty Cycle: S1
- Enclosure: IC411 – TEFC
- Insulation class: F
- Diploma of security: IP55/56/sixty five/66
- Support Aspect: 1.
- Regreasing method: Frame 250 and previously mentioned
Attributes
EPTeautiful profile, large effectiveness and energy saving, course F insulation, IP55 defense grade, reduced noise, small vibration, trustworthy operating.
Optional Functions
Electrical:
Insulation Course:H Design H
Thermal Safety: PTC Thermistor, Thermostat or PT100
Mechanical:
Other individuals mountings
Security Diploma:IP56, IP65, IP66
Sealing:Lip seal, Oil seal
Space Heater, Double shaft ends
Drain Gap
Mounting
Standard mounting kind and appropriate body size are given in following desk(with quot radic quot)
| Frame | standard type | derived kind | |||||||||||||
| EPT3 | EPT5 | EPT35 | V1 | V3 | V5 | V6 | EPT6 | EPT7 | EPT8 | V15 | V36 | EPT14 | EPT34 | V18 | |
| sixty three~112 | radic | radic | radic | radic | radic | radic | radic | radic | radic | radic | radic | radic | radic | radic | radic |
| 132~a hundred and sixty | radic | radic | radic | radic | radic | radic | radic | radic | radic | radic | radic | radic | – | – | – |
| a hundred and eighty~280 | radic | radic | radic | radic | – | – | – | – | – | – | – | – | – | – | – |
| 315~355 | radic | – | radic | radic | – | – | – | – | – | – | – | – | – | – | – |
If there is no other ask for in the orEPTor agreement, terminal box stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd situation is at the rigEPT side of the body information previously mentioned might be changed with out prior notice.
Show Room
High quality Support
EPT Management
EPT Motor Creation Workshop and Movement Chart
Certificates and far more Firm information make sure you go to quotAEPTOUT US quot
—————————————————————————————————————————
Welcome to speak to us immediately…
WANNAN MOTOR EPT Remedies
in Mathura India sales price shop near me near me shop factory supplier Ncj Series Helical Gear Reducer with Electric Motor manufacturer best Cost Custom Cheap wholesaler
In 2000, EPG took the direct in gaining ISO14001 setting administration certificate and thereafter handed the inspection of cleanse generation and recycling economic system, winning the title of “Zhejiang Inexperienced Enterprise”. Our merchandise are produced by modern computerized machinery and equipment. With several years’ experience in this line, we will be trustworthy by our rewards in aggressive value, a single-time delivery, prompt reaction, on-hand engineering assistance and good soon after-product sales solutions.Furthermore, all our creation techniques are in compliance with ISO9001 standards. NCJ series Helical Geared EPT
two:EPT parameters
| Design | EPT rate(KW) | Ratio | Output torque(N.m) | Output velocity(rpm) |
| NCJ02 | .twelve-.55 | 7.fifty nine-201.five | ten.04-201.5 | six.sixty-137.forty five |
| NCJ03 | .twelve-1.one | five.03-two hundred.forty two | 11.75-260.15 | 6.sixty four-276.35 |
| NCJ04 | .twenty five-one.five | eight.09-192.88 | 28.ten-505.87 | 7.15-171.82 |
| NCJ05 | .fifty five-4 | nine.fifty eight-191.66 | 134.31-986.44 | seven.twenty-a hundred and fifty.31 |
| Main elements | Equipment, EPT shaft | |||
| Main areas content | 20CrMnTi | |||
| Set up variety | Flange mounted amp foot mounted | |||
| Lubricant | 6105G | |||
| Guarantee | 12 months | |||
| Characteristic | Tiny quantity, wide scope of ratio, broad brand motor(twenty-60Hz),upkeep-free of charge | |||
| Sort | Helical EPTed motor |
| Design | NCJ02-NCJ05 |
| Ratio | 8-one hundred forty |
| Shade | blue or OEM shades |
| EPT | EPT200 Iron forged |
| EPT | C ampU |
| Seal | SKF,NAK |
| Enter EPT | .twelve-4KW |
| Usages | such as Ceramics,Iron and metal,chemical,oil,EPTarge,food,electronics,leather,pharm-aceutical, textile EPT and so on |
| Mounting sort | Foot mounted,flange mounted |
| Lubricant | 6105GT EPT EPT grease |
| Lower temperature rise | 35 degC-forty two degC(full load) |
| Hardness | 58-62HRC |
| Wide voltage | 20-60Hz |
| High efficiency | ninety two%- ninety six% |
| Equipment Pair | Processed by carburizing and quenching heat remedy |
3: Purposes (widely utilised in) :
Ceramic Market
Glass Business
Foods Sector
EPTlurgy Business
Beer amp Drink Sector
EPT and dyeing Business
Textile Market
Warehouse Logoistics Industry
EPT doing work EPTry
EPT security gear Business
Leather-based Sector
Pharmacy Market
Enery Market
Constructing Sector
four.Our Services
four.one.We give 12 months Guarantee.
4.two. We have 1000’s of EPT EPTs. From Input EPT .06KW to 200KW, Ratio 1.three-289.seventy four, Output pace -1095rpm and Output torque one.four-62800Nm. They can meet your all various demands for distinct EPT.
4.three. We give E-catalog or Paper catalog,so you can decide on the product simply in accordance to your specifications
4.four.You are welcome to pay a visit to our factory to check our products,we can aid you to guide the hotel or ticket
5.Company Information
five.1.Our Company:
The Predecessor for ZheJiang EPT Generate CO.,Ltd (initially named HangEPT XiHu (West Lake) Dis.ngguang EPT EPTry CO.,Ltd) State-owned army mould EPTrpriese which estabEPTd in 1965.
EPT is situated in HangEPT,EPT and the factory covers an spot of about 25000 sq. meters.
Creation Capability:a lot more than 50 % a million sets of speed EPT per 12 months.
5.two.Our Folks:
The business has a robust technical pressure. It has far more than four hundred employees at existing, incXiHu (West Lake) Dis.Hu (West Lake) Dis. more than forty engineering professionals and 10 specialists and senior engineers enEPTing EPT allowances of the State Council.
five.three. Our Certificates:
Passed quot ISO 9001 International EPT Program Certification quot, quotInternational EPT Credit AAA Ceritifacte quot , quot Swiss SGS Certification quot, Iconic Model in EPT EPT Sector quot, quotFamous Brand name of ZheJiang Province quot, quotNon-general public Scientific and Technological EPTrprise in ZheJiang Province quot, quotNational Substantial and EPT-tech EPTrprise quot, quotTOP 50 in EPT Gear Sector quot quot2011 HangEPT Engineering and Technological R ampD CEPTr quot and so on.
6. FAQ
Q:Are you a buying and selling firm or maker?
A: The predecessor of HangEPT XG-EPT EPTry Co., Ltd is Condition-owned XiHu (West Lake) Dis.ngguanggong Mould Factory, a point out-owned armed forces EPT EPTrprise estabEPTd in 1965. It finished reform in 2002. Because reform, EPT has deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed speedily. It took the lead in passing ISO9001 Global EPT Program Certificate and Worldwide EPT Credit history AAA Certificate in 2004, and Swiss SGS Certificate in 2009. It has won this sort of titles as quotIconic Brand in EPT EPT Sector quot, quotFamous Manufacturer of ZheJiang Province quot, quotNon-community Scientific and Technological EPTrprise in ZheJiang Province quot, quotNational High and EPT-tech EPTrprise quot, and quotTope 50 in EPT Gear Business quot successively
Q:In which do you foundation?
A: We are in HangEPT,ZheJiang ,EPT. We have two factories,EPT manufacturing facility is in XiHu (West Lake) Dis.hu (West Lake) Dis. district,HangEPT,EPT and the old one particular is in CHangEPT District,HangEPT,EPT.
Q:What varieties of EPT can you produce for us?
A:Major goods of our firm: JWB-X collection mechanical continuously variable EPT, RV series worm EPT EPT, B/JXJ cycloidal pin EPT speed EPT, NCJ series EPT EPT, and R, S, K, and F sequence helical-tooth EPT, much more than one hundred designs and hundreds of specs.
Q:What are the application of the EPT?
A:EPT are commonly utilised in ceramic, EPT, meals, metallurgy, beer amp drink, printing and dyeing, textile, petrochemical engineering, warehouse EPT, wooden-working EPT, environmental safety gear, printing and EPT, pharmacy, and leather. EPT are bought in some nations and locations, this kind of as Europe, The usa, and SouthEPT Asia, and it possesses dozens of distributors and right after-sale support agents.
Q:What is the content you use?
A: EPT case ( For the RV series worm EPT,product RV030-one zero five)
Cast iron(For the RV series worm EPT, model RV110-a hundred and fifty, For the NCJ /F/R/S/K series helical EPT EPT)
Our manufacturing unit (ZheJiang EPT Travel Co., Ltd.) is a big and famous 6S stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPT manufacturing facility with close to 380 personnel because 1965 . We export to South Asia, SouthEPT Asia, Africa, Middle EPT, South The united states, North America, Europe…etc. We offer you EPT to SIEMENS,ABB,SACMI,BUHLER…and so forth. Sincerely hope to build a earn-earn enterprise romantic relationship with you.
Expecting to speak about more specifics with you !
Very best Wishes
Nicola
Factory: ZheJiang EPT Drive Co., Ltd. (Previous name: HangEPT XiHu (West Lake) Dis.ngEPTg EPT EPTry)
Add: No.ten,HuiEPT EPT Park, EPTi City, XiHu (West Lake) Dis.hu (West Lake) Dis. District, HangEPT Town, ZheJiang Province, EPT.
Tel : 13726248220
in Genoa Italy sales price shop near me near me shop factory supplier Gear Reducer Box Gearbox Reducer Speed Drive Reduction Electric Motor Good Price Transmission Prices Variator Sumitomo Excavator High Rpm China Gear Reducer Box manufacturer best Cost Custom Cheap wholesaler
Furthermore, WE CAN Make Customized VARIATORS, GEARED MOTORS, Electric MOTORS AND OTHER HYDRAULIC Products According TO CUSTOMERS’ DRAWINGS. We are aiming to satisfy the needs of the clients close to the globe.. In this way, our merchandise have continued to obtain industry acceptance and buyers gratification in excess of the earlier couple of a long time.
Equipment EPT EPTox EPT EPT Pace Generate Reduction Electric powered Motor Very good Cost EPT Charges Variator Sumitomo Excavator High Rpm EPT Gear EPT EPTox
