Tag Archives: stepper motor gearbox

China NEMA11 Precision High Torque Hybrid Stepper Motor with Planetary Gearbox with Best Sales

Item Description

 

Solution Description

Planetary Equipment Stepping Motor :
Precision high-end upgrade with Nema8, Nema 11, Nema14, Nema 17, Nema23, Nema 24 
stepper motor low noise, low vibration, firm and durable. Increase torque at low speed.
Reduction ratio:1:3.7 , 1:5.2 , 1:14 , 1:19 ,1:27 ,1:51 , 1:71 ,1:100 ,1:139 , 1:189 ,1:264 , 1:369 ,And 48 hours delivery , in stock .

Software:
Automation control, medical equipment, textile machinery,and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home.   Products with low speed and inertia are often seen: electric curtains, electric shutters, etc

 

Item Parameters

Planetary Equipment Box Specification:

Housing Material Metallic
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 100N
Max.Shaft Axial Load 50N
Radial Play of Shaft (close to to Flange) ≤0.07mm
Axial Engage in of Shaft ≤0.3mm
Backlash at No-load one stage≤1°,2stage≤1.2°,3stage≤1.5°

28HS Hybrid Stepping Motor Technical specs:
 

Model No. Step Angle Motor Duration(L1) Rated Present Resistance Inductance Holding Torque # of Prospects Rotor Inertia Mass Max.Equipment Ratio
Voltage /Section /Phase /Section
One Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
28HS5401 one.eight forty five 4.nine .7 7 5 95 four 28 .2 ≤1:369
28HS7401 1.8 fifty two six.03 .sixty seven nine 7 110 4 45 .25 ≤1:369

 

28HS5401 Planetary Gearbox Specifications:
Reduction ratio three.seventy one 5.18 fourteen 19 27 fifty one seventy one 100 139 189 264 369
Complete Top(L1+L2) (mm) seventy four seventy four eighty one.1 81.1 81.1 88 88 88 88 94.nine ninety four.9 ninety four.nine
Output torque ( mN.m) 317 443 1077 1462 2000 3537 4000 4000 4000 4000 4000 4000
Total Fat(g) 275 275 297 297 297 319 319 319 319 341 341 341
Amount of gear trains 1 2 3 4
Reducer Duration(L2)   (mm) 29 36.1 43. 49.9
Effectiveness 90% 81% 73% 66%

 

28HS7401 Planetary Gearbox Requirements:
Reduction ratio three.seventy one 5.18 fourteen 19 27 fifty one 71 100 139 189 264 369
Complete Height(L1+L2) (mm) 81 81 88.1 88.1 88.1 ninety five ninety five 95 ninety five 101.nine 101.9 a hundred and one.nine
Output torque ( mN.m) 367 513 1247 1693 2000 4000 4000 4000 4000 4000 4000 4000
Complete Bodyweight(g) 325 325 347 347 347 369 369 369 369 391 391 391
Quantity of equipment trains 1 2 3 4
Reducer Duration(L2)   (mm) 29 36.1 43. 49.nine
Effectiveness 90% 81% 73% 66%

 

In depth Pictures

 

Business Profile

ZheJiang UMot Technologies Co., Ltd. specializes in R&D and income of stepper motors, servo motors, linear modules and related movement management products, customizing and planning substantial-quality motor goods for end users with particular requirements close to the entire world, and providing all round remedies for movement management systems. Merchandise are exported to more than 30 nations and areas which includes the United States, Germany, France, Italy, Russia, and Switzerland. The company’s principal products and technique design have been widely used in automation handle, precision instruments, healthcare equipment, sensible home, 3D printing and many other fields.
Our business has been regarded as a high-tech company by related departments, has a complete high quality administration system, has acquired ISO9001, CE, RoHs and other relevant certifications, and holds a amount of electrical patent certificates. “Concentration, Professionalism, Concentration” in the discipline of automation of motor R&D and method handle remedies is the company’s organization goal. “Be your most reliable spouse” is the company’s provider philosophy. We have usually been aiming to “make initial-class merchandise with specialist technological innovation”, preserve rate with the moments, innovate consistently, and provide far more consumers with much better merchandise and providers.

FAQ

one. Shipping and delivery method:
1)Global Express shipping DHL&FEDEX &UPS&TNT& 7-10days
two)Transport by air 7-ten times
three)transport by sea, shipping and delivery time is dependent on the vacation spot port.

two. Specialized Assistance:
We can supply you with expert complex help. And our merchandise top quality promise is 6 months. Also, we settle for products custom-made.

three. Why should you get from us, not from other suppliers?
Professional one-to-1 motor customized. The world’s large business of option for substantial-quality suppliers. ISO9001:2008 good quality management technique certification, by way of the CE, ROHS certification.

four. How to choose models?
Prior to purchasing, please speak to us to confirm product No. and specifications to avoid any misunderstanding.

5. Are you a manufacturing unit?
Sure, we are a manufacturing facility, and we make stepper motor/driver, Servo motor/driver.

 

US $31.2-39.8
/ Piece
|
1 Piece

(Min. Order)

###

Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 35/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 100N
Max.Shaft Axial Load 50N
Radial Play of Shaft (near to Flange) 0.07mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage,2stage1.2°,3stage1.5°

###

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
28HS5401 1.8 45 4.9 0.7 7 5 95 4 28 0.2 1:369
28HS7401 1.8 52 6.03 0.67 9 7 110 4 45 0.25 1:369

###

28HS5401 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 74 74 81.1 81.1 81.1 88 88 88 88 94.9 94.9 94.9
Output torque ( mN.m) 317 443 1077 1462 2000 3537 4000 4000 4000 4000 4000 4000
Total Weight(g) 275 275 297 297 297 319 319 319 319 341 341 341
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 29 36.1 43.0 49.9
Efficiency 90% 81% 73% 66%

###

28HS7401 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 81 81 88.1 88.1 88.1 95 95 95 95 101.9 101.9 101.9
Output torque ( mN.m) 367 513 1247 1693 2000 4000 4000 4000 4000 4000 4000 4000
Total Weight(g) 325 325 347 347 347 369 369 369 369 391 391 391
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 29 36.1 43.0 49.9
Efficiency 90% 81% 73% 66%
US $31.2-39.8
/ Piece
|
1 Piece

(Min. Order)

###

Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 35/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 100N
Max.Shaft Axial Load 50N
Radial Play of Shaft (near to Flange) 0.07mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage,2stage1.2°,3stage1.5°

###

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
28HS5401 1.8 45 4.9 0.7 7 5 95 4 28 0.2 1:369
28HS7401 1.8 52 6.03 0.67 9 7 110 4 45 0.25 1:369

###

28HS5401 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 74 74 81.1 81.1 81.1 88 88 88 88 94.9 94.9 94.9
Output torque ( mN.m) 317 443 1077 1462 2000 3537 4000 4000 4000 4000 4000 4000
Total Weight(g) 275 275 297 297 297 319 319 319 319 341 341 341
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 29 36.1 43.0 49.9
Efficiency 90% 81% 73% 66%

###

28HS7401 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 81 81 88.1 88.1 88.1 95 95 95 95 101.9 101.9 101.9
Output torque ( mN.m) 367 513 1247 1693 2000 4000 4000 4000 4000 4000 4000 4000
Total Weight(g) 325 325 347 347 347 369 369 369 369 391 391 391
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 29 36.1 43.0 49.9
Efficiency 90% 81% 73% 66%

Benefits of a Planetary Motor

Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.
Motor

Solar gear

The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.

Sun gear

The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.
Motor

Planetary gear

A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.

Planetary gearbox

A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.
Motor

Planetary gear motor

Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.

China NEMA11 Precision High Torque Hybrid Stepper Motor with Planetary Gearbox     with Best SalesChina NEMA11 Precision High Torque Hybrid Stepper Motor with Planetary Gearbox     with Best Sales
editor by czh 2022-12-30

China NEMA 8, 11, 14, 16, 17, 23, 34, 43 Electric Stepping Stepper Geared Stepper Motor with Planetary Gearbox motor driver

Merchandise Description

Merchandise Requirements  
Phase Angle one.8°
Temperature Increase 80ºCmax
Ambient Temperature -20ºC~+50ºC
Insulation Resistance one hundred MΩ Min. ,500VDC
Dielectric Power 500VAC for 1minute
Shaft Radial Enjoy .02Max. (450g-load)
Shaft Axial Play .08Max. (450g-load)
Max. radial force 75N (20mm from the flange)
Max. axial drive 15N

 

Technical specs:

Design No. Step Angle Motor Length Recent
/Phase
Resistance
/Phase
Inductance
/Stage
Holding Torque # of Leads Detent Torque Rotor Inertia Mass
( °) (L)mm A Ω mH N.m No. g.cm g.cm Kg
JK57HS41-1006 one.8 41 one 7.one 8 .forty eight 6 250 one hundred fifty .forty seven
JK57HS41-2008 one.eight forty one two 1.four 1.4 .39 eight 250 150 .47
JK57HS41-2804 one.8 forty one 2.eight .seven one.4 .fifty five 4 250 a hundred and fifty .forty seven
JK57HS51-1006 one.eight fifty one 1 6.6 8.2 .seventy two 6 three hundred 230 .fifty nine
JK57HS51-2008 1.8 fifty one two one.8 2.seven .nine 8 three hundred 230 .fifty nine
JK57HS51-2804 1.8 fifty one two.8 .83 two.two 1.01 4 300 230 .59
JK57HS56-2006 1.8 56 two 1.8 2.5 .nine six 350 280 .sixty eight
JK57HS56-2108 one.8 fifty six two.1 1.8 two.5 1 eight 350 280 .68
JK57HS56-2804 one.8 56 2.8 .9 2.5 1.2 4 350 280 .sixty eight
JK57HS64-2804 one.eight 64 2.8 .eight two.three 1 four four hundred three hundred .75
JK57HS76-2804 one.8 76 two.8 1.one three.6 1.89 4 600 440 1.1
JK57HS76-3006 1.eight 76 three 1 one.six 1.35 6 600 440 one.1
JK57HS76-3008 one.8 76 3 one one.eight one.five eight 600 440 one.1
JK57HS82-3004 one.8 82 three one.two 4 two.one four a thousand 600 one.two
JK57HS82-4008 1.8 82 4 .8 one.eight two eight 1000 600 1.2
JK57HS82-4204 one.8 eighty two four.two .seven two.5 2.2 4 a thousand 600 one.two
JK57HS100-4204 one.8 one hundred 4.two .75 three three four 1100 700 1.three
JK57HS112-3004 one.eight 112 three 1.six seven.five 3 four 1200 800 1.4
JK57HS112-4204 1.8 112 four.2 .nine three.eight three.one four 1200 800 1.4

Planetary Gearbox Specification:

 Reduction ratio 3.six 4.twenty five 13 fifteen 18 23 47 55 sixty five seventy seven 121 154 187 220 260 307
 Number of equipment trains 1 2 3 4
(L2) Duration(mm) 37.eight 49.five 60.eight 71.9
Max.rated torque(N.m) 3 12 24 30
Limited time permissible torque(N.m) 9 36 72 90
Efficiency( %) 90%       81% 73% 66%
Weight(g) 489 681 871 1066

 
Drawing(device=mm)

 

US $21.67
/ Piece
|
3 Pieces

(Min. Order)

###

Application: Nc Machine Tool
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 2

###

Samples:
US$ 21.67/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Item Specifications  
Step Angle 1.8°
Temperature Rise 80ºCmax
Ambient Temperature -20ºC~+50ºC
Insulation Resistance 100 MΩ Min. ,500VDC
Dielectric Strength 500VAC for 1minute
Shaft Radial Play 0.02Max. (450g-load)
Shaft Axial Play 0.08Max. (450g-load)
Max. radial force 75N (20mm from the flange)
Max. axial force 15N

###

Model No. Step Angle Motor Length Current
/Phase
Resistance
/Phase
Inductance
/Phase
Holding Torque # of Leads Detent Torque Rotor Inertia Mass
( °) (L)mm A Ω mH N.m No. g.cm g.cm Kg
JK57HS41-1006 1.8 41 1 7.1 8 0.48 6 250 150 0.47
JK57HS41-2008 1.8 41 2 1.4 1.4 0.39 8 250 150 0.47
JK57HS41-2804 1.8 41 2.8 0.7 1.4 0.55 4 250 150 0.47
JK57HS51-1006 1.8 51 1 6.6 8.2 0.72 6 300 230 0.59
JK57HS51-2008 1.8 51 2 1.8 2.7 0.9 8 300 230 0.59
JK57HS51-2804 1.8 51 2.8 0.83 2.2 1.01 4 300 230 0.59
JK57HS56-2006 1.8 56 2 1.8 2.5 0.9 6 350 280 0.68
JK57HS56-2108 1.8 56 2.1 1.8 2.5 1 8 350 280 0.68
JK57HS56-2804 1.8 56 2.8 0.9 2.5 1.2 4 350 280 0.68
JK57HS64-2804 1.8 64 2.8 0.8 2.3 1 4 400 300 0.75
JK57HS76-2804 1.8 76 2.8 1.1 3.6 1.89 4 600 440 1.1
JK57HS76-3006 1.8 76 3 1 1.6 1.35 6 600 440 1.1
JK57HS76-3008 1.8 76 3 1 1.8 1.5 8 600 440 1.1
JK57HS82-3004 1.8 82 3 1.2 4 2.1 4 1000 600 1.2
JK57HS82-4008 1.8 82 4 0.8 1.8 2 8 1000 600 1.2
JK57HS82-4204 1.8 82 4.2 0.7 2.5 2.2 4 1000 600 1.2
JK57HS100-4204 1.8 100 4.2 0.75 3 3 4 1100 700 1.3
JK57HS112-3004 1.8 112 3 1.6 7.5 3 4 1200 800 1.4
JK57HS112-4204 1.8 112 4.2 0.9 3.8 3.1 4 1200 800 1.4

###

 Reduction ratio 3.6 4.25 13 15 18 23 47 55 65 77 121 154 187 220 260 307
 Number of gear trains 1 2 3 4
(L2) Length(mm) 37.8 49.5 60.8 71.9
Max.rated torque(N.m) 3 12 24 30
Short time permissible torque(N.m) 9 36 72 90
Efficiency( %) 90%       81% 73% 66%
Weight(g) 489 681 871 1066
US $21.67
/ Piece
|
3 Pieces

(Min. Order)

###

Application: Nc Machine Tool
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 2

###

Samples:
US$ 21.67/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Item Specifications  
Step Angle 1.8°
Temperature Rise 80ºCmax
Ambient Temperature -20ºC~+50ºC
Insulation Resistance 100 MΩ Min. ,500VDC
Dielectric Strength 500VAC for 1minute
Shaft Radial Play 0.02Max. (450g-load)
Shaft Axial Play 0.08Max. (450g-load)
Max. radial force 75N (20mm from the flange)
Max. axial force 15N

###

Model No. Step Angle Motor Length Current
/Phase
Resistance
/Phase
Inductance
/Phase
Holding Torque # of Leads Detent Torque Rotor Inertia Mass
( °) (L)mm A Ω mH N.m No. g.cm g.cm Kg
JK57HS41-1006 1.8 41 1 7.1 8 0.48 6 250 150 0.47
JK57HS41-2008 1.8 41 2 1.4 1.4 0.39 8 250 150 0.47
JK57HS41-2804 1.8 41 2.8 0.7 1.4 0.55 4 250 150 0.47
JK57HS51-1006 1.8 51 1 6.6 8.2 0.72 6 300 230 0.59
JK57HS51-2008 1.8 51 2 1.8 2.7 0.9 8 300 230 0.59
JK57HS51-2804 1.8 51 2.8 0.83 2.2 1.01 4 300 230 0.59
JK57HS56-2006 1.8 56 2 1.8 2.5 0.9 6 350 280 0.68
JK57HS56-2108 1.8 56 2.1 1.8 2.5 1 8 350 280 0.68
JK57HS56-2804 1.8 56 2.8 0.9 2.5 1.2 4 350 280 0.68
JK57HS64-2804 1.8 64 2.8 0.8 2.3 1 4 400 300 0.75
JK57HS76-2804 1.8 76 2.8 1.1 3.6 1.89 4 600 440 1.1
JK57HS76-3006 1.8 76 3 1 1.6 1.35 6 600 440 1.1
JK57HS76-3008 1.8 76 3 1 1.8 1.5 8 600 440 1.1
JK57HS82-3004 1.8 82 3 1.2 4 2.1 4 1000 600 1.2
JK57HS82-4008 1.8 82 4 0.8 1.8 2 8 1000 600 1.2
JK57HS82-4204 1.8 82 4.2 0.7 2.5 2.2 4 1000 600 1.2
JK57HS100-4204 1.8 100 4.2 0.75 3 3 4 1100 700 1.3
JK57HS112-3004 1.8 112 3 1.6 7.5 3 4 1200 800 1.4
JK57HS112-4204 1.8 112 4.2 0.9 3.8 3.1 4 1200 800 1.4

###

 Reduction ratio 3.6 4.25 13 15 18 23 47 55 65 77 121 154 187 220 260 307
 Number of gear trains 1 2 3 4
(L2) Length(mm) 37.8 49.5 60.8 71.9
Max.rated torque(N.m) 3 12 24 30
Short time permissible torque(N.m) 9 36 72 90
Efficiency( %) 90%       81% 73% 66%
Weight(g) 489 681 871 1066

Benefits of a Planetary Motor

A planetary motor has many benefits. Its compact design and low noise makes it a good choice for any application. Among its many uses, planetary gear motors are found in smart cars, consumer electronics, intelligent robots, communication equipment, and medical technology. They can even be found in smart homes! Read on to discover the benefits of a planetary gear motor. You’ll be amazed at how versatile and useful it is!
Motor

Self-centering planet gears ensure a symmetrical force distribution

A planetary motor is a machine with multiple, interlocking planetary gears. The output torque is inversely proportional to the diameters of the planets, and the transmission size has no bearing on the output torque. A torsional stress analysis of the retaining structure for this type of motor found a maximum shear stress of 64 MPa, which is equivalent to a safety factor of 3.1 for 6061 aluminum. Self-centering planet gears are designed to ensure a symmetrical force distribution throughout the transmission system, with the weakest component being the pinions.
A planetary gearbox consists of ring and sun gears. The pitch diameters of ring and planet gears are nearly equal. The number of teeth on these gears determines the average gear-ratio per output revolution. This error is related to the manufacturing precision of the gears. The effect of this error is a noise or vibration characteristic of the planetary gearbox.
Another design for a planetary gearbox is a traction-based variant. This design eliminates the need for timing marks and other restrictive assembly conditions. The design of the ring gear is similar to that of a pencil sharpener mechanism. The ring gear is stationary while planet gears extend into cylindrical cutters. When placed on the sun’s axis, the pencil sharpening mechanism revolves around the ring gear to sharpen the pencil.
The JDS eliminates the need for conventional planetary carriers and is mated with the self-centering planet gears by dual-function components. The dual-function components synchronize the rolling motion and traction of the gears. They also eliminate the need for a carrier and reduce the force distribution between the rotor and stator.

Metal gears

A planetary motor is a type of electric drive that uses a series of metal gears. These gears share a load attached to the output shaft to generate torque. The planetary motor is often CNC controlled, with extra-long shafts, which allow it to fit into very compact designs. These gears are available in sizes from seven millimeters to 12 millimeters. They can also be fitted with encoders.
Planetary gearing is widely used in various industrial applications, including automobile transmissions, off-road transmissions, and wheel drive motors. They are also used in bicycles to power the shift mechanism. Another use for planetary gearing is as a powertrain between an internal combustion engine and an electric motor. They are also used in forestry applications, such as debarking equipment and sawing. They can be used in other industries as well, such as pulp washers and asphalt mixers.
Planetary gear sets are composed of three types of gears: a sun gear, planet gears, and an outer ring. The sun gear transfers torque to the planet gears, and the planet gears mesh with the outer ring gear. Planet carriers are designed to deliver high-torque output at low speeds. These gears are mounted on carriers that are moved around the ring gear. The planet gears mesh with the ring gears, and the sun gear is mounted on a moveable carrier.
Plastic planetary gear motors are less expensive to produce than their metal counterparts. However, plastic gears suffer from reduced strength, rigidity, and load capacity. Metal gears are generally easier to manufacture and have less backlash. Plastic planetary gear motor bodies are also lighter and less noisy. Some of the largest plastic planetary gear motors are made in collaboration with leading suppliers. When buying a plastic planetary gear motor, be sure to consider what materials it is made of.
Motor

Encoder

The Mega Torque Planetary Encoder DC Geared Motor is designed with a Japanese Mabuchi motor RS-775WC, a 200 RPM base motor. It is capable of achieving stall torque at low speeds, which is impossible to achieve with a simple DC motor. The planetary encoder provides five pulses per revolution, making it perfect for applications requiring precise torque or position. This motor requires an 8mm hex coupling for proper use.
This encoder has a high resolution and is suitable for ZGX38REE, ZGX45RGG and ZGX50RHH. It features a magnetic disc and poles and an optical disc to feed back signals. It can count paulses as the motor passes through a hall on the circuit board. Depending on the gearbox ratio, the encoder can provide up to two million transitions per rotation.
The planetary gear motor uses a planetary gear system to distribute torque in synchrony. This minimizes the risk of gear failure and increases the overall output capacity of the device. On the other hand, a spur gear motor is a simpler design and cheaper to produce. The spur gear motor works better for lower torque applications as each gear bears all the load. As such, the torque capacity of the spur gear motor is lower than that of a planetary gear motor.
The REV UltraPlanetary gearbox is designed for FTC and has three different output shaft options. The output shaft is made of 3/8-inch hex, allowing for flexible shaft replacement. These motors are a great value as they can be used to meet a wide range of power requirements. The REV UltraPlanetary gearbox and motor are available for very reasonable prices and a female 5mm hex output shaft can be used.

Durability

One of the most common questions when selecting a planetary motor is “How durable is it?” This is a question that’s often asked by people. The good news is that planetary motors are extremely durable and can last for a long time if properly maintained. For more information, read on! This article will cover the durability and efficiency of planetary gearmotors and how you can choose the best one for your needs.
First and foremost, planetary gear sets are made from metal materials. This increases their lifespan. The planetary gear set is typically made of metals such as nickel-steel and steel. Some planetary gear motors use plastic. Steel-cut gears are the most durable and suitable for applications that require more torque. Nickel-steel gears are less durable, but are better able to hold lubricant.
Durability of planetary motor gearbox is important for applications requiring high torque versus speed. VEX VersaPlanetary gearboxes are designed for FRC(r) use and are incredibly durable. They are expensive, but they are highly customizable. The planetary gearbox can be removed for maintenance and replacement if necessary. Parts for the gearbox can be purchased separately. VEX VersaPlanetary gearboxes also feature a pinion clamped onto the motor shaft.
Dynamic modeling of the planetary gear transmission system is important for understanding its durability. In previous studies, uncoupled and coupled meshing models were used to investigate the effect of various design parameters on the vibration characteristics of the planetary gear system. This analysis requires considering the role of the mesh stiffness, structure stiffness, and moment of inertia. Moreover, dynamic models for planetary gear transmission require modeling the influence of multiple parameters, such as mesh stiffness and shaft location.
Motor

Cost

The planetary gear motor has multiple contact points that help the rotor rotate at different speeds and torques. This design is often used in stirrers and large vats of liquid. This type of motor has a low initial cost and is more commonly found in low-torque applications. A planetary gear motor has multiple contact points and is more effective for applications requiring high torque. Gear motors are often found in stirring mechanisms and conveyor belts.
A planetary gearmotor is typically made from four mechanically linked rotors. They can be used for various applications, including automotive and laboratory automation. The plastic input stage gears reduce noise at higher speeds. Steel gears can be used for high torques and a modified lubricant is often added to reduce weight and mass moment of inertia. Its low-cost design makes it an excellent choice for robots and other applications.
There are many different types of planetary gear motors available. A planetary gear motor has three gears, the sun gear and planet gears, with each sharing equal amounts of work. They are ideal for applications requiring high torque and low-resistance operation, but they require more parts than their single-stage counterparts. The steel cut gears are the most durable, and are often used in applications that require high speeds. The nickel-steel gears are more absorptive, which makes them better for holding lubricant.
A planetary gear motor is a high-performance electrical vehicle motor. A typical planetary gear motor has a 3000 rpm speed, a peak torque of 0.32 Nm, and is available in 24V, 36V, and 48V power supply. It is also quiet and efficient, requiring little maintenance and offering greater torque to a modern electric car. If you are thinking of buying a planetary gear motor, be sure to do a bit of research before purchasing one.

China NEMA 8, 11, 14, 16, 17, 23, 34, 43 Electric Stepping Stepper Geared Stepper Motor with Planetary Gearbox     motor driver	China NEMA 8, 11, 14, 16, 17, 23, 34, 43 Electric Stepping Stepper Geared Stepper Motor with Planetary Gearbox     motor driver
editor by czh 2022-12-14